CVE Database

A vulnerability in the VPN web server of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, remote attacker to execute arbitrary code on an affected device. This vulnerability is due to improper validation of user-supplied input in HTTP(S) requests. An attacker with valid VPN user credentials could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as root, possibly resulting in the complete compromise of the affected device.

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow the following: An authenticated, remote attacker with low privileges could cause a denial of service (DoS) condition on an affected device that is running Cisco IOS Software or Cisco IOS XE Software. To cause the DoS, the attacker must have the SNMPv2c or earlier read-only community string or valid SNMPv3 user credentials. An authenticated, remote attacker with high privileges could execute code as the root user on an affected device that is running Cisco IOS XE Software. To execute code as the root user, the attacker must have the SNMPv1 or v2c read-only community string or valid SNMPv3 user credentials and administrative or privilege 15 credentials on the affected device. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device over IPv4 or IPv6 networks. This vulnerability is due to a stack overflow condition in the SNMP subsystem of the affected software. A successful exploit could allow a low-privileged attacker to cause the affected system to reload, resulting in a DoS condition, or allow a high-privileged attacker to execute arbitrary code as the root user and obtain full control of the affected system. Note: This vulnerability affects all versions of SNMP.

Type confusion in V8 in Google Chrome prior to 140.0.7339.185 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)

SolarWinds Web Help Desk was found to be susceptible to an unauthenticated AjaxProxy deserialization remote code execution vulnerability that, if exploited, would allow an attacker to run commands on the host machine. This vulnerability is a patch bypass of CVE-2024-28988, which in turn is a patch bypass of CVE-2024-28986.

Libraesva ESG 4.5 through 5.5.x before 5.5.7 allows command injection via a compressed e-mail attachment. For ESG 5.0 a fix has been released in 5.0.31. For ESG 5.1 a fix has been released in 5.1.20. For ESG 5.2 a fix has been released in 5.2.31. For ESG 5.4 a fix has been released in 5.4.8. For ESG 5.5. a fix has been released in 5.5.7.

CWP (aka Control Web Panel or CentOS Web Panel) before 0.9.8.1205 allows unauthenticated remote code execution via shell metacharacters in the t_total parameter in a filemanager changePerm request. A valid non-root username must be known.

A deserialization vulnerability in the License Servlet of Fortra's GoAnywhere MFT allows an actor with a validly forged license response signature to deserialize an arbitrary actor-controlled object, possibly leading to command injection.

An Out-of-bounds Write vulnerability in WatchGuard Fireware OS may allow a remote unauthenticated attacker to execute arbitrary code. This vulnerability affects both the Mobile User VPN with IKEv2 and the Branch Office VPN using IKEv2 when configured with a dynamic gateway peer.This vulnerability affects Fireware OS 11.10.2 up to and including 11.12.4_Update1, 12.0 up to and including 12.11.3 and 2025.1.

Out-of-bounds write in libimagecodec.quram.so prior to SMR Sep-2025 Release 1 allows remote attackers to execute arbitrary code.

Out-of-bounds write in libimagecodec.quram.so prior to SMR Apr-2025 Release 1 allows remote attackers to execute arbitrary code.

Adobe Commerce versions 2.4.9-alpha2, 2.4.8-p2, 2.4.7-p7, 2.4.6-p12, 2.4.5-p14, 2.4.4-p15 and earlier are affected by an Improper Input Validation vulnerability. A successful attacker can abuse this to achieve session takeover, increasing the confidentiality, and integrity impact to high. Exploitation of this issue does not require user interaction.

In multiple locations, there is a possible way to escape chrome sandbox to attack android system_server due to a use after free. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

Deserialization of Untrusted Data vulnerability in Sitecore Experience Manager (XM), Sitecore Experience Platform (XP) allows Code Injection.This issue affects Experience Manager (XM): through 9.0; Experience Platform (XP): through 9.0.

The authenticated remote command execution (RCE) vulnerability exists in the Parental Control page on TP-Link Archer C7(EU) V2 and TL-WR841N/ND(MS) V9. This issue affects Archer C7(EU) V2: before 241108 and TL-WR841N/ND(MS) V9: before 241108. Both products have reached the status of EOL (end-of-life). It's recommending to purchase the new product to ensure better performance and security. If replacement is not an option in the short term, please use the second reference link to download and install the patch(es).

Incomplete authorization of linked device synchronization messages in WhatsApp for iOS prior to v2.25.21.73, WhatsApp Business for iOS v2.25.21.78, and WhatsApp for Mac v2.25.21.78 could have allowed an unrelated user to trigger processing of content from an arbitrary URL on a target’s device. We assess that this vulnerability, in combination with an OS-level vulnerability on Apple platforms (CVE-2025-43300), may have been exploited in a sophisticated attack against specific targeted users.

FreePBX is an open-source web-based graphical user interface. FreePBX 15, 16, and 17 endpoints are vulnerable due to insufficiently sanitized user-supplied data allowing unauthenticated access to FreePBX Administrator leading to arbitrary database manipulation and remote code execution. This issue has been patched in endpoint versions 15.0.66, 16.0.89, and 17.0.3.

Memory overflow vulnerability leading to Remote Code Execution and/or Denial of Service in NetScaler ADC and NetScaler Gateway when NetScaler is configured as Gateway (VPN virtual server, ICA Proxy, CVPN, RDP Proxy) or AAA virtual server (OR) NetScaler ADC and NetScaler Gateway 13.1, 14.1, 13.1-FIPS and NDcPP: LB virtual servers of type (HTTP, SSL or HTTP_QUIC) bound with IPv6 services or servicegroups bound with IPv6 servers (OR) NetScaler ADC and NetScaler Gateway 13.1, 14.1, 13.1-FIPS and NDcPP: LB virtual servers of type (HTTP, SSL or HTTP_QUIC) bound with DBS IPv6 services or servicegroups bound with IPv6 DBS servers (OR) CR virtual server with type HDX

An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 15.8.5 and iPadOS 15.8.5, iOS 16.7.12 and iPadOS 16.7.12, iOS 18.6.2 and iPadOS 18.6.2, iPadOS 17.7.10, macOS Sequoia 15.6.1, macOS Sonoma 14.7.8, macOS Ventura 13.7.8. Processing a malicious image file may result in memory corruption. Apple is aware of a report that this issue may have been exploited in an extremely sophisticated attack against specific targeted individuals.

Improper Input Validation vulnerability in N-able N-central allows OS Command Injection.This issue affects N-central: before 2025.3.1.

Deserialization of Untrusted Data vulnerability in N-able N-central allows Local Execution of Code.This issue affects N-central: before 2025.3.1.

A path traversal vulnerability affecting the Windows version of WinRAR allows the attackers to execute arbitrary code by crafting malicious archive files. This vulnerability was exploited in the wild and was discovered by Anton Cherepanov, Peter Košinár, and Peter Strýček from ESET.

Adobe Experience Manager versions 6.5.23 and earlier are affected by a Misconfiguration vulnerability that could result in arbitrary code execution. An attacker could leverage this vulnerability to bypass security mechanisms and execute code. Exploitation of this issue does not require user interaction and scope is changed.

A vulnerability in Trend Micro Apex One (on-premise) management console could allow a pre-authenticated remote attacker to upload malicious code and execute commands on affected installations.

A missing authorization vulnerability affecting DELMIA Apriso from Release 2020 through Release 2025 could allow an attacker to gain privileged access to the application.

An Improper Control of Generation of Code (Code Injection) vulnerability affecting DELMIA Apriso from Release 2020 through Release 2025 could allow an attacker to execute arbitrary code.

The issue was addressed with improved memory handling. This issue is fixed in Safari 18.6, iOS 18.6 and iPadOS 18.6, macOS Sequoia 15.6, tvOS 18.6, visionOS 2.6, watchOS 11.6. Processing maliciously crafted web content may lead to memory corruption.

In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: fix race between handle_posix_cpu_timers() and posix_cpu_timer_del() If an exiting non-autoreaping task has already passed exit_notify() and calls handle_posix_cpu_timers() from IRQ, it can be reaped by its parent or debugger right after unlock_task_sighand(). If a concurrent posix_cpu_timer_del() runs at that moment, it won't be able to detect timer->it.cpu.firing != 0: cpu_timer_task_rcu() and/or lock_task_sighand() will fail. Add the tsk->exit_state check into run_posix_cpu_timers() to fix this. This fix is not needed if CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y, because exit_task_work() is called before exit_notify(). But the check still makes sense, task_work_add(&tsk->posix_cputimers_work.work) will fail anyway in this case.

Deserialization of untrusted data in on-premises Microsoft SharePoint Server allows an unauthorized attacker to execute code over a network. Microsoft is aware that an exploit for CVE-2025-53770 exists in the wild. Microsoft is preparing and fully testing a comprehensive update to address this vulnerability. In the meantime, please make sure that the mitigation provided in this CVE documentation is in place so that you are protected from exploitation.

eslint-config-prettier 8.10.1, 9.1.1, 10.1.6, and 10.1.7 has embedded malicious code for a supply chain compromise. Installing an affected package executes an install.js file that launches the node-gyp.dll malware on Windows.

CrushFTP 10 before 10.8.5 and 11 before 11.3.4_23, when the DMZ proxy feature is not used, mishandles AS2 validation and consequently allows remote attackers to obtain admin access via HTTPS, as exploited in the wild in July 2025.

Livewire is a full-stack framework for Laravel. In Livewire v3 up to and including v3.6.3, a vulnerability allows unauthenticated attackers to achieve remote command execution in specific scenarios. The issue stems from how certain component property updates are hydrated. This vulnerability is unique to Livewire v3 and does not affect prior major versions. Exploitation requires a component to be mounted and configured in a particular way, but does not require authentication or user interaction. This issue has been patched in Livewire v3.6.4. All users are strongly encouraged to upgrade to this version or later as soon as possible. No known workarounds are available.

An improper neutralization of special elements used in an SQL command ('SQL Injection') vulnerability [CWE-89] vulnerability in Fortinet FortiWeb 7.6.0 through 7.6.3, FortiWeb 7.4.0 through 7.4.7, FortiWeb 7.2.0 through 7.2.10, FortiWeb 7.0.0 through 7.0.10 allows an unauthenticated attacker to execute unauthorized SQL code or commands via crafted HTTP or HTTPs requests.

A vulnerability in a specific API of Cisco ISE and Cisco ISE-PIC could allow an unauthenticated, remote attacker to execute arbitrary code on the underlying operating system as root. The attacker does not require any valid credentials to exploit this vulnerability. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted API request. A successful exploit could allow the attacker to obtain root privileges on an affected device.

Insufficient validation of untrusted input in ANGLE and GPU in Google Chrome prior to 138.0.7204.157 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High)

loginok.html in Wing FTP Server before 7.4.4 discloses the full local installation path of the application when using a long value in the UID cookie.

In Wing FTP Server before 7.4.4. the user and admin web interfaces mishandle '\0' bytes, ultimately allowing injection of arbitrary Lua code into user session files. This can be used to execute arbitrary system commands with the privileges of the FTP service (root or SYSTEM by default). This is thus a remote code execution vulnerability that guarantees a total server compromise. This is also exploitable via anonymous FTP accounts.

Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. When reading a config value, Git strips any trailing carriage return and line feed (CRLF). When writing a config entry, values with a trailing CR are not quoted, causing the CR to be lost when the config is later read. When initializing a submodule, if the submodule path contains a trailing CR, the altered path is read resulting in the submodule being checked out to an incorrect location. If a symlink exists that points the altered path to the submodule hooks directory, and the submodule contains an executable post-checkout hook, the script may be unintentionally executed after checkout. This vulnerability is fixed in v2.43.7, v2.44.4, v2.45.4, v2.46.4, v2.47.3, v2.48.2, v2.49.1, and v2.50.1.

Improper authentication in Microsoft Office SharePoint allows an unauthorized attacker to perform spoofing over a network.

Improper control of generation of code ('code injection') in Microsoft Office SharePoint allows an authorized attacker to execute code over a network.

Type confusion in V8 in Google Chrome prior to 138.0.7204.96 allowed a remote attacker to perform arbitrary read/write via a crafted HTML page. (Chromium security severity: High)

Sudo before 1.9.17p1 allows local users to obtain root access because /etc/nsswitch.conf from a user-controlled directory is used with the --chroot option.

A vulnerability in a specific API of Cisco ISE and Cisco ISE-PIC could allow an unauthenticated, remote attacker to execute arbitrary code on the underlying operating system as root. The attacker does not require any valid credentials to exploit this vulnerability. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted API request. A successful exploit could allow the attacker to obtain root privileges on an affected device.

Memory overflow vulnerability leading to unintended control flow and Denial of Service in NetScaler ADC and NetScaler Gateway when configured as Gateway (VPN virtual server, ICA Proxy, CVPN, RDP Proxy) OR AAA virtual server

Quest KACE Systems Management Appliance (SMA) 13.0.x before 13.0.385, 13.1.x before 13.1.81, 13.2.x before 13.2.183, 14.0.x before 14.0.341 (Patch 5), and 14.1.x before 14.1.101 (Patch 4) contains an authentication bypass vulnerability that allows attackers to impersonate legitimate users without valid credentials. The vulnerability exists in the SSO authentication handling mechanism and can lead to complete administrative takeover.

An issue was discovered in Zimbra Collaboration (ZCS) 8.8.15 and 9.0 and 10.0 and 10.1. A Cross-Site Scripting (XSS) vulnerability in the Zimbra Classic UI allows attackers to execute arbitrary JavaScript within the user's session, potentially leading to unauthorized access to sensitive information. This issue arises from insufficient sanitization of HTML content, specifically involving crafted tag structures and attribute values that include an @import directive and other script injection vectors. The vulnerability is triggered when a user views a crafted e-mail message in the Classic UI, requiring no additional user interaction.

RARLAB WinRAR Directory Traversal Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of RARLAB WinRAR. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the handling of file paths within archive files. A crafted file path can cause the process to traverse to unintended directories. An attacker can leverage this vulnerability to execute code in the context of the current user. Was ZDI-CAN-27198.

Insufficient input validation leading to memory overread when the NetScaler is configured as a Gateway (VPN virtual server, ICA Proxy, CVPN, RDP Proxy) OR AAA virtual server

This issue was addressed with improved checks. This issue is fixed in iOS 15.8.4 and iPadOS 15.8.4, iOS 16.7.11 and iPadOS 16.7.11, iOS 18.3.1 and iPadOS 18.3.1, iPadOS 17.7.5, macOS Sequoia 15.3.1, macOS Sonoma 14.7.4, macOS Ventura 13.7.4, visionOS 2.3.1, watchOS 11.3.1. A logic issue existed when processing a maliciously crafted photo or video shared via an iCloud Link. Apple is aware of a report that this issue may have been exploited in an extremely sophisticated attack against specific targeted individuals.

Improper access control in Windows SMB allows an authorized attacker to elevate privileges over a network.

External control of file name or path in Internet Shortcut Files allows an unauthorized attacker to execute code over a network.