A CWE-259 "Use of Hard-coded Password" for the root account in Q-Free MaxTime less than or equal to version 2.11.0 allows an unauthenticated remote attacker to execute arbitrary code with root privileges via SSH.
In the Linux kernel, the following vulnerability has been resolved:
Revert "libfs: fix infinite directory reads for offset dir"
The current directory offset allocator (based on mtree_alloc_cyclic)
stores the next offset value to return in octx->next_offset. This
mechanism typically returns values that increase monotonically over
time. Eventually, though, the newly allocated offset value wraps
back to a low number (say, 2) which is smaller than other already-
allocated offset values.
Yu Kuai <yukuai3@huawei.com> reports that, after commit 64a7ce76fb90
("libfs: fix infinite directory reads for offset dir"), if a
directory's offset allocator wraps, existing entries are no longer
visible via readdir/getdents because offset_readdir() stops listing
entries once an entry's offset is larger than octx->next_offset.
These entries vanish persistently -- they can be looked up, but will
never again appear in readdir(3) output.
The reason for this is that the commit treats directory offsets as
monotonically increasing integer values rather than opaque cookies,
and introduces this comparison:
if (dentry2offset(dentry) >= last_index) {
On 64-bit platforms, the directory offset value upper bound is
2^63 - 1. Directory offsets will monotonically increase for millions
of years without wrapping.
On 32-bit platforms, however, LONG_MAX is 2^31 - 1. The allocator
can wrap after only a few weeks (at worst).
Revert commit 64a7ce76fb90 ("libfs: fix infinite directory reads for
offset dir") to prepare for a fix that can work properly on 32-bit
systems and might apply to recent LTS kernels where shmem employs
the simple_offset mechanism.
In the Linux kernel, the following vulnerability has been resolved:
hrtimers: Handle CPU state correctly on hotplug
Consider a scenario where a CPU transitions from CPUHP_ONLINE to halfway
through a CPU hotunplug down to CPUHP_HRTIMERS_PREPARE, and then back to
CPUHP_ONLINE:
Since hrtimers_prepare_cpu() does not run, cpu_base.hres_active remains set
to 1 throughout. However, during a CPU unplug operation, the tick and the
clockevents are shut down at CPUHP_AP_TICK_DYING. On return to the online
state, for instance CFS incorrectly assumes that the hrtick is already
active, and the chance of the clockevent device to transition to oneshot
mode is also lost forever for the CPU, unless it goes back to a lower state
than CPUHP_HRTIMERS_PREPARE once.
This round-trip reveals another issue; cpu_base.online is not set to 1
after the transition, which appears as a WARN_ON_ONCE in enqueue_hrtimer().
Aside of that, the bulk of the per CPU state is not reset either, which
means there are dangling pointers in the worst case.
Address this by adding a corresponding startup() callback, which resets the
stale per CPU state and sets the online flag.
[ tglx: Make the new callback unconditionally available, remove the online
modification in the prepare() callback and clear the remaining
state in the starting callback instead of the prepare callback ]
HCL Connections Docs is vulnerable to a sensitive information disclosure which could allow a user to obtain sensitive information they are not entitled to, caused by improper handling of request data.
A vulnerability has been found in code-projects Real Estate Property Management System 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /_parse/load_user-profile.php. The manipulation of the argument userhash leads to sql injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.
The Small Package Quotes – Purolator Edition plugin for WordPress is vulnerable to SQL Injection via the 'edit_id' and 'dropship_edit_id' parameters in all versions up to, and including, 3.6.4 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.
Stored Cross-Site Scripting (XSS) vulnerability in Prestashop 8.1.7, due to the lack of proper validation of user input through ‘/<admin_directory>/index.php’, affecting the ‘link’ parameter. This vulnerability could allow a remote user to send a specially crafted query to an authenticated user and steal their cookie session details.
The Rise Blocks – A Complete Gutenberg Page Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the titleTag parameter in all versions up to, and including, 3.6 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The ShipEngine Shipping Quotes plugin for WordPress is vulnerable to SQL Injection via the 'edit_id' parameter in all versions up to, and including, 1.0.7 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.
The FuseDesk plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'fusedesk_newcase' shortcode in all versions up to, and including, 6.6.1 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The Apus Framework plugin for WordPress is vulnerable to unauthorized modification of data that can lead to privilege escalation due to a missing capability check on the 'import_page_options' function in all versions up to, and including, 2.4. This makes it possible for authenticated attackers, with Subscriber-level access and above, to update arbitrary options on the WordPress site. This can be leveraged to update the default role for registration to administrator and enable user registration for attackers to gain administrative user access to a vulnerable site. NOTE: This vulnerability was partially fixed in version 2.4.
The WP Job Board Pro plugin for WordPress is vulnerable to privilege escalation in all versions up to 2.3.16. This is due to the plugin allowing a user to supply the 'role' field when registering. This makes it possible for unauthenticated attackers to register as an administrator on vulnerable sites. Please note that this may have been patched sooner, however, the oldest available version for us to confirm this is patched in was 1.2.85.
A vulnerability was found in pihome-shc PiHome 2.0. It has been classified as critical. This affects an unknown part of the file /ajax.php?Ajax=GetModal_Sensor_Graph. The manipulation leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.
Cross-site scripting vulnerability exists in acmailer CGI ver.4.0.5 and earlier. An arbitrary script may be executed on the web browser of the user who accessed the management page of the affected product.
A vulnerability was found in pihome-shc PiHome 1.77 and classified as critical. Affected by this issue is some unknown functionality of the file /ajax.php?Ajax=GetModal_MQTTEdit. The manipulation of the argument id leads to sql injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
The All-Images.ai – IA Image Bank and Custom Image creation plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the '_get_image_by_url' function in all versions up to, and including, 1.0.4. This makes it possible for authenticated attackers, with Subscriber-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible.
The ZoxPress - The All-In-One WordPress News Theme theme for WordPress is vulnerable to unauthorized modification of data that can lead to privilege escalation due to a missing capability check on the 'backup_options' and 'restore_options' functions in all versions up to, and including, 2.12.0. This makes it possible for authenticated attackers, with Subscriber-level access and above, to update arbitrary options on the WordPress site. This can be leveraged to update the default role for registration to administrator and enable user registration for attackers to gain administrative user access to a vulnerable site.
The Temporal api-go library prior to version 1.44.1 did not send `update response` information to Data Converter when the proxy package within the api-go module was used in a gRPC proxy prior to transmission. This resulted in information contained within the `update response` field not having Data Converter transformations (e.g. encryption) applied. This is an issue only when using the UpdateWorkflowExecution APIs (released on 13th January 2025) with a proxy leveraging the api-go library before version 1.44.1.
Other data fields were correctly sent to Data Converter. This issue does not impact the Data Converter server. Data was encrypted in transit. Temporal Cloud services are not impacted.
NVIDIA nvJPEG2000 library contains a vulnerability where an attacker can cause a heap-based buffer overflow issue by means of a specially crafted JPEG2000 file. A successful exploit of this vulnerability might lead to code execution and data tampering.
NVIDIA nvJPEG2000 library contains a vulnerability where an attacker can cause a buffer overflow issue by means of a specially crafted JPEG2000 file. A successful exploit of this vulnerability might lead to data tampering.
NVIDIA nvJPEG2000 library contains a vulnerability where an attacker can cause an out-of-bounds write issue by means of a specially crafted JPEG2000 file. A successful exploit of this vulnerability might lead to code execution and data tampering.
Improper input validation in AMD Crash Defender could allow an attacker to provide the Windows® system process ID to a kernel-mode driver, resulting in an operating system crash, potentially leading to denial of service.
NVIDIA nvJPEG2000 library contains a vulnerability where an attacker can cause an out-of-bounds write issue by means of a specially crafted JPEG2000 file. A successful exploit of this vulnerability might lead to code execution and data tampering.
NVIDIA Jetson AGX Orin™ and NVIDIA IGX Orin software contain a vulnerability where an attacker can cause an improper input validation issue by escalating certain permissions to a limited degree. A successful exploit of this vulnerability might lead to code execution, denial of service, data corruption, information disclosure, or escalation of privilege.
Improper access control in the ASP could allow a privileged attacker to perform an out-of-bounds write to a memory location not controlled by the attacker, potentially leading to loss of confidentiality, integrity, or availability.
CtrlPanel is open-source billing software for hosting providers. Prior to version 1.0, a Cross-Site Scripting (XSS) vulnerability exists in the `TicketsController` and `Moderation/TicketsController` due to insufficient input validation on the `priority` field during ticket creation and unsafe rendering of this field in the moderator panel. Version 1.0 contains a patch for the issue.
An issue in the SharedConfig class of Telegram Android APK v.11.7.0 allows a physically proximate attacker to bypass authentication and escalate privileges by manipulating the return value of the checkPasscode method.
An issue in AnkiDroid Android Application v2.17.6 allows attackers to retrieve internal files from the /data/data/com.ichi2.anki/ directory and save it into publicly available storage.
An issue in Team Amaze Amaze File Manager v.3.8.5 and fixed in v.3.10 allows a local attacker to execute arbitrary code via the onCreate method of DatabaseViewerActivity.java.
In hostapd 2.10 and earlier, the PKEX code remains active even after a successful PKEX association. An attacker that successfully bootstrapped public keys with another entity using PKEX in the past, will be able to subvert a future bootstrapping by passively observing public keys, re-using the encrypting element Qi and subtracting it from the captured message M (X = M - Qi). This will result in the public ephemeral key X; the only element required to subvert the PKEX association.
An issue in the BdApiUtil driver of Baidu Antivirus v5.2.3.116083 allows attackers to terminate arbitrary process via executing a BYOVD (Bring Your Own Vulnerable Driver) attack.
GeoNetwork is a catalog application to manage spatially referenced resources. In versions prior to 4.2.10 and 4.4.5, the search end-point response headers contain information about Elasticsearch software in use. This information is valuable from a security point of view because it allows software used by the server to be easily identified. GeoNetwork 4.4.5 and 4.2.10 fix this issue. No known workarounds are available.
Improper access control in the DRTM firmware could allow a privileged attacker to perform multiple driver initializations, resulting in stack memory corruption that could potentially lead to loss of integrity or availability.
Improper handling of invalid nested page table entries in the IOMMU may allow a privileged attacker to induce page table entry (PTE) faults to bypass RMP checks in SEV-SNP, potentially leading to a loss of guest memory integrity.
Improper access control in the fTPM driver in the trusted OS could allow a privileged attacker to corrupt system memory, potentially leading to loss of integrity, confidentiality, or availability.
SMM callout vulnerability within the AmdPlatformRasSspSmm driver could allow a ring 0 attacker to modify boot services handlers, potentially resulting in arbitrary code execution.
SMM Callout vulnerability within the AmdCpmDisplayFeatureSMM driver could allow locally authenticated attackers to overwrite SMRAM, potentially resulting in arbitrary code execution.
Buffer overflow vulnerability in Digital China DCBI-Netlog-LAB Gateway 1.0 due to the lack of length verification, which is related to saving parental control configuration information. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands.
Buffer overflow vulnerability in Digital China DCBC Gateway 200-2.1.1 due to the lack of length verification, which is related to the configuration of static NAT rules. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands.
Multiple buffer overflow vulnerabilities in Wavlink WL-WN575A3 RPT75A3.V4300, which are caused by not performing strict length checks on user-controlled data. By successfully exploiting the vulnerabilities, attackers can crash the remote devices or execute arbitrary commands without any authorization verification.
Buffer overflow vulnerability in Mercury MIPC552W Camera v1.0 due to the lack of length verification, which is related to the configuration of the PPTP server. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands.