CVE Database

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Fix PF driver crash with kexec kernel booting During a kexec reboot the hardware is not power-cycled, so AF state from the old kernel can persist into the new kernel. When AF and PF drivers are built as modules, the PF driver may probe before AF reinitializes the hardware. The PF driver treats the RVUM block revision as an indication that AF initialization is complete. If this value is left uncleared at shutdown, PF may incorrectly assume AF is ready and access stale hardware state, leading to a crash. Clear the RVUM block revision during AF shutdown to avoid PF mis-detecting AF readiness after kexec.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: clear stale link mapping of ahvif->links_map When an arvif is initialized in non-AP STA mode but MLO connection preparation fails before the arvif is created (arvif->is_created remains false), the error path attempts to delete all links. However, link deletion only executes when arvif->is_created is true. As a result, ahvif retains a stale entry of arvif that is initialized but not created. When a new arvif is initialized with the same link id, this stale mapping triggers the following WARN_ON. WARNING: drivers/net/wireless/ath/ath12k/mac.c:4271 at ath12k_mac_op_change_vif_links+0x140/0x180 [ath12k], CPU#3: wpa_supplicant/275 Call trace: ath12k_mac_op_change_vif_links+0x140/0x180 [ath12k] (P) drv_change_vif_links+0xbc/0x1a4 [mac80211] ieee80211_vif_update_links+0x54c/0x6a0 [mac80211] ieee80211_vif_set_links+0x40/0x70 [mac80211] ieee80211_prep_connection+0x84/0x450 [mac80211] ieee80211_mgd_auth+0x200/0x480 [mac80211] ieee80211_auth+0x14/0x20 [mac80211] cfg80211_mlme_auth+0x90/0xf0 [cfg80211] nl80211_authenticate+0x32c/0x380 [cfg80211] genl_family_rcv_msg_doit+0xc8/0x134 Fix this issue by unassigning the link vif and clearing ahvif->links_map if arvif is only initialized but not created. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gfx3d: add parent to parent request map After commit d228ece36345 ("clk: divider: remove round_rate() in favor of determine_rate()") determining GFX3D clock rate crashes, because the passed parent map doesn't provide the expected best_parent_hw clock (with the roundd_rate path before the offending commit the best_parent_hw was ignored). Set the field in parent_req in addition to setting it in the req, fixing the crash. clk_hw_round_rate (drivers/clk/clk.c:1764) (P) clk_divider_bestdiv (drivers/clk/clk-divider.c:336) divider_determine_rate (drivers/clk/clk-divider.c:358) clk_alpha_pll_postdiv_determine_rate (drivers/clk/qcom/clk-alpha-pll.c:1275) clk_core_determine_round_nolock (drivers/clk/clk.c:1606) clk_core_round_rate_nolock (drivers/clk/clk.c:1701) __clk_determine_rate (drivers/clk/clk.c:1741) clk_gfx3d_determine_rate (drivers/clk/qcom/clk-rcg2.c:1268) clk_core_determine_round_nolock (drivers/clk/clk.c:1606) clk_core_round_rate_nolock (drivers/clk/clk.c:1701) clk_core_round_rate_nolock (drivers/clk/clk.c:1710) clk_round_rate (drivers/clk/clk.c:1804) dev_pm_opp_set_rate (drivers/opp/core.c:1440 (discriminator 1)) msm_devfreq_target (drivers/gpu/drm/msm/msm_gpu_devfreq.c:51) devfreq_set_target (drivers/devfreq/devfreq.c:360) devfreq_update_target (drivers/devfreq/devfreq.c:426) devfreq_monitor (drivers/devfreq/devfreq.c:458) process_one_work (arch/arm64/include/asm/jump_label.h:36 include/trace/events/workqueue.h:110 kernel/workqueue.c:3284) worker_thread (kernel/workqueue.c:3356 (discriminator 2) kernel/workqueue.c:3443 (discriminator 2)) kthread (kernel/kthread.c:467) ret_from_fork (arch/arm64/kernel/entry.S:861)

In the Linux kernel, the following vulnerability has been resolved: power: supply: pm8916_lbc: Fix use-after-free for extcon in IRQ handler Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `extcon` handle, means that the `extcon` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `extcon` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `extcon_set_state_sync()` with a freed `extcon` handle. Which usually crashes the system or otherwise silently corrupts the memory... Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `extcon` handle.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix dc_link NULL handling in HPD init amdgpu_dm_hpd_init() may see connectors without a valid dc_link. The code already checks dc_link for the polling decision, but later unconditionally dereferences it when setting up HPD interrupts. Assign dc_link early and skip connectors where it is NULL. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c:940 amdgpu_dm_hpd_init() error: we previously assumed 'dc_link' could be null (see line 931) drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c 923 /* 924 * Analog connectors may be hot-plugged unlike other connector 925 * types that don't support HPD. Only poll analog connectors. 926 */ 927 use_polling |= 928 amdgpu_dm_connector->dc_link && ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The patch adds this NULL check but hopefully it can be removed 929 dc_connector_supports_analog(amdgpu_dm_connector->dc_link->link_id.id); 930 931 dc_link = amdgpu_dm_connector->dc_link; dc_link assigned here. 932 933 /* 934 * Get a base driver irq reference for hpd ints for the lifetime 935 * of dm. Note that only hpd interrupt types are registered with 936 * base driver; hpd_rx types aren't. IOW, amdgpu_irq_get/put on 937 * hpd_rx isn't available. DM currently controls hpd_rx 938 * explicitly with dc_interrupt_set() 939 */ --> 940 if (dc_link->irq_source_hpd != DC_IRQ_SOURCE_INVALID) { ^^^^^^^^^^^^^^^^^^^^^^^ If it's NULL then we are trouble because we dereference it here. 941 irq_type = dc_link->irq_source_hpd - DC_IRQ_SOURCE_HPD1; 942 /* 943 * TODO: There's a mismatch between mode_info.num_hpd 944 * and what bios reports as the # of connectors with hpd

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_inner: Fix IPv6 inner_thoff desync In nft_inner_parse_l2l3(), when processing inner IPv6 packets, ipv6_find_hdr() correctly computes the transport header offset traversing all extension headers, but the result is immediately overwritten with nhoff + sizeof(_ip6h) (40 bytes), which only accounts for the IPv6 base header. This creates a desync between inner_thoff (wrong — points to extension header start) and l4proto (correct — e.g., IPPROTO_TCP), enabling transport header forgery and potential firewall bypass. This issue affects stable versions from Linux 6.2. For comparison, the normal (non-inner) IPv6 path correctly preserves ipv6_find_hdr()'s result. Removing the incorrect overwrite ensures that ipv6_find_hdr()'s calculated transport header offset is preserved, thereby fixing the desynchronization.

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 3.16.0 and prior to 4.11.0, a user-after-free (UAF) race condition exists in the shared memory teardown logic of FF-A within OP-TEE SPMC/SP flows. This only applies when OP-TEE is configured as an SPMC for S-EL0 SPs, that is, with `CFG_SECURE_PARTITION=y`. The function `sp_mem_remove()`, responsible for freeing entries in `smem->receivers` and `smem->regions`, fails to acquire the global `sp_mem_lock` before performing the `free()` operations. Concurrently, other code paths, such as `sp_mem_get_receiver()`, iterate over these same lists without holding a lock, or, like `sp_mem_is_shared()`, iterate while holding the lock but are not serialized against the unprotected `free()` in `sp_mem_remove()`. This creates a cross-thread race where a thread iterating the list can acquire a pointer to an entry (e.g., `struct sp_mem_map_region` or `struct sp_mem_receiver`), and then another thread calls `sp_mem_remove()`, freeing the object. When the first thread resumes and dereferences the pointer, it results in a Use-After-Free vulnerability. Version 4.11.0 fixes the issue.

A Cross Site Scripting vulnerability exists in the Kimi AI v1.0 web interface's 'Preview' feature. The application fails to properly sanitize or encode HTML/JavaScript payloads generated by the AI model. When a user switches to the 'Preview' tab to view AI-generated code, the malicious payload is rendered directly into the DOM, leading to arbitrary JavaScript execution in the victim's browser session.

Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 responds to version.bind CHAOS TXT queries, disclosing the DNS resolver software version (unbound 1.22.0), aiding targeted attacks against known vulnerabilities.

Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 contains hardcoded WiFi driver credentials including a RADIUS shared secret, WPS test key, and default PSK embedded in the production firmware binary.

Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 exposes an undocumented /agileconfigreset endpoint that returns internal buffer contents to unauthenticated attackers on the adjacent network.

Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 returns 128 bytes of uninitialized internal buffer contents when receiving HTTP POST requests to undefined paths, exposing server state to unauthenticated adjacent network attackers.

Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 enables WPS 2.0 by default with a weak lockout policy (60-second lockout after 10 attempts).

Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 returns 128 bytes of uninitialized buffer when receiving POST requests without SOAPAction header on UPnP port 1900, exposing internal memory to unauthenticated adjacent network attackers.

Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 transmits DDNS credentials over plaintext HTTP with only Base64 encoding. The firmware contains no TLS implementation, allowing man-in-the-middle interception of DDNS service credentials.

Mercusys AC12G (EU) V1 router with firmware AC12G(EU)_V1_200909 uses a static authentication nonce that does not change between requests from the same source IP. Combined with the predictable XOR-based password encoding (securityEncode function), this allows an attacker to reverse captured authentication tokens to recover the plaintext password.

Mercusys AC12G (EU) V1 router with firmware AC12G(EU)_V1_200909 allows UPnP AddPortMapping to forward external ports to the router's own admin interface by accepting its own IP (192.168.1.1) or localhost (127.0.0.1) as InternalClient. An unauthenticated LAN attacker can expose the admin panel to the internet with a single SOAP request.

Mercusys AC12G (EU) V1 router with firmware AC12G(EU)_V1_200909 allows unauthenticated brute-force attacks via the TDDP password change endpoint (code=10), which lacks the rate limiting applied to the login endpoint (code=7). An attacker on the adjacent network can attempt unlimited passwords without triggering account lockout.

Mercusys AC12G (EU) V1 router with firmware AC12G(EU)_V1_200909 encrypts configuration backups with a hardcoded DES key using single DES in ECB mode. An attacker who obtains a backup file can decrypt it to recover all stored credentials including admin password, WiFi PSK, and DDNS credentials.

Mercusys AC12G (EU) V1 router with firmware AC12G(EU)_V1_200909 is vulnerable to a HTTP denial of service via a low number of crafted incomplete HTTP requests, causing a persistent crash that requires physical power cycling to recover.

Mercusys AC12G (EU) V1 router with firmware AC12G(EU)_V1_200909 does not validate the HTTP Host header, enabling DNS rebinding attacks. An external attacker can rebind a domain to the router's internal IP address, extending the CORS wildcard vulnerability (Access-Control-Allow-Origin: *) to internet-originated attacks.

Mercusys AC12G (EU) V1 router with firmware AC12G(EU)_V1_200909 exposes 15 of 18 UPnP IGD actions without authentication on port 1900, including AddPortMapping and GetExternalIPAddress. UPnP is enabled by default through the admin interface, allowing any unauthenticated LAN device to create arbitrary port forwarding rules and access WAN traffic statistics.

Mercusys AC12G (EU) V1 router with firmware AC12G(EU)_V1_200909 discloses kernel memory layout via the UPnP GetStatusInfo action. An unauthenticated attacker on the adjacent network can obtain a raw MIPS KSEG0 kernel pointer, revealing kernel memory layout and aiding further exploitation.

Dovestones Softwares ADPhonebook before v4.0.1.1 is vulnerable to a Cross Site Scripting vulnerability. The /Admin/Save API allows an authenticated admin user to store malicious JavaScript payloads in multiple configuration sections without proper input validation or output encoding.

A vulnerability in the web-based user interface of Cisco Webex Meetings could have allowed an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack. Cisco has addressed this vulnerability in the Webex Meetings service, and no customer action is needed. This vulnerability existed because of insufficient validation of user input. Prior to this vulnerability being addressed, an attacker could have exploited this vulnerability by persuading a user to follow a malicious link. A successful exploit could have allowed the attacker to execute arbitrary script code in the browser of the targeted user or access sensitive, browser-based information.

A vulnerability in Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an unauthenticated, remote attacker to conduct server-side request forgery (SSRF) attacks through an affected device. This vulnerability is due to improper input validation for specific HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to write files to the underlying operating system that could be used later to elevate to root. Note: Cisco has assigned this security advisory a Security Impact Rating (SIR) of Critical rather than High as the score indicates. The reason is that exploitation of this vulnerability could result in an attacker elevating privileges to root. Note: To exploit this vulnerability, the WebDialer service must be enabled. WebDialer is disabled by default.

A vulnerability in Cisco Finesse could allow an unauthenticated, remote attacker to load arbitrary files from remote locations into an active user session on an affected device, possibly leading to browser-based attacks. This vulnerability is due to insufficient validation of user-supplied input for HTTP requests that are sent to an affected device. An attacker who has knowledge of the address of the affected device could exploit this vulnerability by persuading a user to click a crafted link that contains the affected device address. A successful exploit could allow the attacker to conduct browser-based attacks and execute arbitrary script code in the context of the affected interface or access sensitive information on the affected device.

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Recover from panthor_gpu_flush_caches() failures We have seen a few cases where the whole memory subsystem is blocked and flush operations never complete. When that happens, we want to: - schedule a reset, so we can recover from this situation - in the reset path, we need to reset the pending_reqs so we can send new commands after the reset - if more panthor_gpu_flush_caches() operations are queued after the timeout, we skip them and return -EIO directly to avoid needless waits (the memory block won't miraculously work again) Note that we drop the WARN_ON()s because these hangs can be triggered with buggy GPU jobs created by the UMD, and there's no way we can prevent it. We do keep the error messages though. v2: - New patch v3: - Collect R-b - Explicitly mention the fact we dropped the WARN_ON()s in the commit message v4: - No changes

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Add missing NULL check for alloc_workqueue() alloc_workqueue() can return NULL on memory allocation failure. Without proper error checking, this may lead to a NULL pointer dereference when queue_work() is later called with the NULL workqueue pointer in epf_ntb_epc_init(). Add a NULL check immediately after alloc_workqueue() and return -ENOMEM on failure to prevent the driver from loading with an invalid workqueue pointer.

Dräger SC Monitoring devices (SC 6002XL, SC 6802XL, SC 7000, SC 8000, SC 9000 XL) contain a denial-of-service vulnerability in all software versions that allows unauthenticated attackers to reboot the monitor by sending a malformed network packet. Attackers can repeatedly send such malformed packets to disrupt patient monitoring until the device falls back to default configuration and loses network connectivity.

A vulnerability in jupyter-server versions 1.12.0 through 2.17.0 allows an attacker to bypass CORS origin validation when the `allow_origin_pat` configuration is used. The issue arises from the use of `re.match()` for validating the `Origin` header, which only anchors at the start of the string. This allows attacker-controlled domains such as `trusted.example.com.evil.com` to pass validation against patterns intended to match `trusted.example.com`. The vulnerability affects multiple locations in the codebase, including CORS headers, WebSocket connections, referer validation, and login redirects, potentially enabling phishing attacks, arbitrary code execution, and unauthorized access to sensitive API responses.

GLPI is a free asset and IT management software package. Starting in version 0.78 and prior to versions 10.0.25 and 11.0.7, an authenticated user with config READ permission can read a specific asset object. Upgrade to 11.0.7 or 10.0.25 to receive a patch.

GLPI is a free asset and IT management software package. Starting in version 10.0.4 and prior to version 10.0.25, a technician can store an XSS payload in the asset locked tab. Upgrade to 10.0.25 or 11.0.7 to receive a patch.

GLPI is a free asset and IT management software package. Starting in version 0.50 and prior to versions 10.0.25 and 11.0.7, a technician can read arbitrary files inside the GLPI_DOC_DIR. Upgrade to 10.0.25 or 11.0.7 to receive a patch.

GLPI is a free asset and IT management software package. Starting in version 9.5.0 and prior to versions 10.0.25 and 11.0.7, low privilege users with access to planning can delete any object in GLPI. Upgrade to 11.0.7 or 10.0.25 to receive a patch. As a workaround, disable delete rights for User's planning.

GLPI is a free asset and IT management software package. Starting in version 0.78 and prior to versions 10.0.25 and 11.0.7, a technician can delete arbitrary files from the filesystem as long as the webserver has write rights on them. Upgrade to 10.0.25 or 11.0.7 to receive a patch.

unicodedata.normalize() can take excessive CPU time when processing specially crafted Unicode input containing long runs of combining characters with alternating Canonical Combining Class values. This affects all normalization forms.

An integer underflow in the BGPUpdate.DecodeFromBytes function (/bgp/bgp.go) of gobgp v4.3.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted BGP UPDATE message.

RockRMS v16.13 and before v.17.7.0 is vulnerable to Cross Site Scripting (XSS) via Social Media links in user profile.

An OS command injection vulnerability in the app.py component of openlabs docker-wkhtmltopdf-aas up to commit 9f50579 allows attackers to execute arbitrary commands via a crafted POST request.

A DLL hijacking vulnerability in Wassimulator (GitHub) CactusViewer v2.3.0 allows attackers to escalate privileges and execute arbitrary code via a crafted DLL.

backpack/crud provides Create, Read, Update & Delete (CRUD) functions for Backpack, a collection of Laravel packages that help users build custom administration panels. Versions prior to 5.0.13, 4.1.69, and 4.0.63 are vulnerable to cross-site scripting. An attacker could conduct a targeted phishing campaign, in order to trick users or admins into clicking a malicious link, which under very specific circumstances could give them information or possibly admin access. Versions 5.0.13, 4.1.69, and 4.0.63 patch the issue. As a workaround, manually look inside error views in `resources/views/errors` and output `e($exception->getMessage())` instead of `$exception->getMessage()`.

An issue was discovered in Django 5.2 before 5.2.15 and 6.0 before 6.0.6. `django.middleware.cache.UpdateCacheMiddleware` in Django does not match `Cache-Control` response directives case-insensitively, which allows remote attackers to read responses that were incorrectly cached because their `Cache-Control` directives used uppercase or mixed-case values. Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected. Django would like to thank Ahmed Badawe for reporting this issue.

An issue was discovered in Django 6.0 before 6.0.6 and 5.2 before 5.2.15. `django.core.mail.backends.smtp.EmailBackend` in Django fails to prevent reuse of a partially-initialized connection after a failed `STARTTLS` handshake when `fail_silently=True`, which allows on-path network attackers to read email content via cleartext interception. Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected. Django would like to thank Kasper Dupont for reporting this issue.

An issue was discovered in Django 6.0 before 6.0.6 and 5.2 before 5.2.15. `django.http.HttpRequest.get_signed_cookie` in Django uses a non-injective salt derivation (concatenating the cookie name and salt argument), which allows a remote attacker to use a cookie in a context different from the one where it was signed, via distinct `(name, salt)` pairs that produce the same concatenation. Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected. Django would like to thank Peng Zhou for reporting this issue.

A vulnerability in the LightGlue model loading path of huggingface/transformers version 5.2.0 allows an attacker-controlled model repository to execute arbitrary code during model initialization. The issue arises because the `trust_remote_code` parameter, intended to prevent remote code execution, is overridden by untrusted serialized configuration data in a nested code path. Specifically, when loading a LightGlue model using `AutoModel.from_pretrained()` with `trust_remote_code=False`, the `LightGlueConfig` reads the `trust_remote_code` value from the untrusted `config.json` file and propagates it into nested `AutoConfig.from_pretrained()` calls. This results in the execution of attacker-provided Python modules, even when the victim explicitly disables remote code execution. The vulnerability poses a high risk for environments such as API inference servers, research notebooks, CI/CD pipelines, and model evaluation workers, potentially leading to credential theft, lateral movement, or persistence/backdoor deployment.

An issue was discovered in Django 5.2 before 5.2.15 and 6.0 before 6.0.6. `django.utils.cache.has_vary_header()` in Django does not strip leading or trailing whitespace from `Vary` response header values before comparison, which allows remote attackers to read cached responses via requests to URLs whose responses contain whitespace-padded Vary header values. Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected. Django would like to thank Navid Rezazadeh for reporting this issue.

ProjectsAndPrograms school-management-system uses predictable credentials by generating student's and teacher's passwords solely from the user’s date of birth (e.g., 12072000 for 12 July 2000). The application does not require or prompt users to change the password upon first login. This behavior allows attackers to easily guess or derive valid credentials, leading to unauthorized account access. The maintainers were notified early about this vulnerability but did not provide details regarding affected versions. The version corresponding to commit 6b6fae5 was tested and confirmed vulnerable; other versions were not tested and may also be affected.

ProjectsAndPrograms school-management-system is vulnerable to Stored Cross‑Site Scripting (XSS) in multiple attributes of students and teachers objects. An authorized attacker (e.g., a teacher or administrator) can inject malicious JavaScript that is subsequently executed in other users’ browsers. Critically, when chained with CVE‑2025‑11661, which allows unauthenticated access to backend endpoints, this vulnerability can be exploited by a remote attacker without privileges to inject and execute arbitrary JavaScript. The maintainers were notified early about this vulnerability but did not provide details regarding affected versions. The version corresponding to commit 6b6fae5 was tested and confirmed vulnerable; other versions were not tested and may also be affected.

daphne before 4.2.2 reconstructs a raw HTTP request from Twisted's parsed headers and feeds it to autobahn for WebSocket handshake processing. Twisted does not treat \x0b, \x0c, \x1c, \x1d, \x1e, or \x85 as header line separators, but autobahn decodes header values to str and calls splitlines(). An attacker can exploit this parser differential to inject additional headers into the ASGI scope passed to the application. daphne now rejects requests with these bytes in any header value with a 400 response.