In the Linux kernel, the following vulnerability has been resolved:
regulator: bq257xx: Fix device node reference leak in bq257xx_reg_dt_parse_gpio()
In bq257xx_reg_dt_parse_gpio(), if fails to get subchild, it returns
without calling of_node_put(child), causing the device node reference
leak.
In the Linux kernel, the following vulnerability has been resolved:
i40e: Fix preempt count leak in napi poll tracepoint
Using get_cpu() in the tracepoint assignment causes an obvious preempt
count leak because nothing invokes put_cpu() to undo it:
softirq: huh, entered softirq 3 NET_RX with preempt_count 00000100, exited with 00000101?
This clearly has seen a lot of testing in the last 3+ years...
Use smp_processor_id() instead.
In the Linux kernel, the following vulnerability has been resolved:
net: usb: kaweth: validate USB endpoints
The kaweth driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints.
In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix invalid wait context in ctx_sched_in()
Lockdep found a bug in the event scheduling when a pinned event was
failed and wakes up the threads in the ring buffer like below.
It seems it should not grab a wait-queue lock under perf-context lock.
Let's do it with irq_work.
[ 39.913691] =============================
[ 39.914157] [ BUG: Invalid wait context ]
[ 39.914623] 6.15.0-next-20250530-next-2025053 #1 Not tainted
[ 39.915271] -----------------------------
[ 39.915731] repro/837 is trying to lock:
[ 39.916191] ffff88801acfabd8 (&event->waitq){....}-{3:3}, at: __wake_up+0x26/0x60
[ 39.917182] other info that might help us debug this:
[ 39.917761] context-{5:5}
[ 39.918079] 4 locks held by repro/837:
[ 39.918530] #0: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: __perf_event_task_sched_in+0xd1/0xbc0
[ 39.919612] #1: ffff88806ca3c6f8 (&cpuctx_lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1a7/0xbc0
[ 39.920748] #2: ffff88800d91fc18 (&ctx->lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1f9/0xbc0
[ 39.921819] #3: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: perf_event_wakeup+0x6c/0x470
In the Linux kernel, the following vulnerability has been resolved:
bpf/bonding: reject vlan+srcmac xmit_hash_policy change when XDP is loaded
bond_option_mode_set() already rejects mode changes that would make a
loaded XDP program incompatible via bond_xdp_check(). However,
bond_option_xmit_hash_policy_set() has no such guard.
For 802.3ad and balance-xor modes, bond_xdp_check() returns false when
xmit_hash_policy is vlan+srcmac, because the 802.1q payload is usually
absent due to hardware offload. This means a user can:
1. Attach a native XDP program to a bond in 802.3ad/balance-xor mode
with a compatible xmit_hash_policy (e.g. layer2+3).
2. Change xmit_hash_policy to vlan+srcmac while XDP remains loaded.
This leaves bond->xdp_prog set but bond_xdp_check() now returning false
for the same device. When the bond is later destroyed, dev_xdp_uninstall()
calls bond_xdp_set(dev, NULL, NULL) to remove the program, which hits
the bond_xdp_check() guard and returns -EOPNOTSUPP, triggering:
WARN_ON(dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL))
Fix this by rejecting xmit_hash_policy changes to vlan+srcmac when an
XDP program is loaded on a bond in 802.3ad or balance-xor mode.
commit 39a0876d595b ("net, bonding: Disallow vlan+srcmac with XDP")
introduced bond_xdp_check() which returns false for 802.3ad/balance-xor
modes when xmit_hash_policy is vlan+srcmac. The check was wired into
bond_xdp_set() to reject XDP attachment with an incompatible policy, but
the symmetric path -- preventing xmit_hash_policy from being changed to an
incompatible value after XDP is already loaded -- was left unguarded in
bond_option_xmit_hash_policy_set().
Note:
commit 094ee6017ea0 ("bonding: check xdp prog when set bond mode")
later added a similar guard to bond_option_mode_set(), but
bond_option_xmit_hash_policy_set() remained unprotected.
In the Linux kernel, the following vulnerability has been resolved:
tracing: Add NULL pointer check to trigger_data_free()
If trigger_data_alloc() fails and returns NULL, event_hist_trigger_parse()
jumps to the out_free error path. While kfree() safely handles a NULL
pointer, trigger_data_free() does not. This causes a NULL pointer
dereference in trigger_data_free() when evaluating
data->cmd_ops->set_filter.
Fix the problem by adding a NULL pointer check to trigger_data_free().
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y.
In the Linux kernel, the following vulnerability has been resolved:
can: ems_usb: ems_usb_read_bulk_callback(): check the proper length of a message
When looking at the data in a USB urb, the actual_length is the size of
the buffer passed to the driver, not the transfer_buffer_length which is
set by the driver as the max size of the buffer.
When parsing the messages in ems_usb_read_bulk_callback() properly check
the size both at the beginning of parsing the message to make sure it is
big enough for the expected structure, and at the end of the message to
make sure we don't overflow past the end of the buffer for the next
message.
In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Fix use-after-free in pm8001_queue_command()
Commit e29c47fe8946 ("scsi: pm8001: Simplify pm8001_task_exec()") refactors
pm8001_queue_command(), however it introduces a potential cause of a double
free scenario when it changes the function to return -ENODEV in case of phy
down/device gone state.
In this path, pm8001_queue_command() updates task status and calls
task_done to indicate to upper layer that the task has been handled.
However, this also frees the underlying SAS task. A -ENODEV is then
returned to the caller. When libsas sas_ata_qc_issue() receives this error
value, it assumes the task wasn't handled/queued by LLDD and proceeds to
clean up and free the task again, resulting in a double free.
Since pm8001_queue_command() handles the SAS task in this case, it should
return 0 to the caller indicating that the task has been handled.
In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: fix unwinding in error path in rocket_probe
When rocket_core_init() fails (as could be the case with EPROBE_DEFER),
we need to properly unwind by decrementing the counter we just
incremented and if this is the first core we failed to probe, remove the
rocket DRM device with rocket_device_fini() as well. This matches the
logic in rocket_remove(). Failing to properly unwind results in
out-of-bounds accesses.
In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix NULL pointer deref in ip6_rt_get_dev_rcu()
l3mdev_master_dev_rcu() can return NULL when the slave device is being
un-slaved from a VRF. All other callers deal with this, but we lost
the fallback to loopback in ip6_rt_pcpu_alloc() -> ip6_rt_get_dev_rcu()
with commit 4832c30d5458 ("net: ipv6: put host and anycast routes on
device with address").
KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f]
RIP: 0010:ip6_rt_pcpu_alloc (net/ipv6/route.c:1418)
Call Trace:
ip6_pol_route (net/ipv6/route.c:2318)
fib6_rule_lookup (net/ipv6/fib6_rules.c:115)
ip6_route_output_flags (net/ipv6/route.c:2607)
vrf_process_v6_outbound (drivers/net/vrf.c:437)
I was tempted to rework the un-slaving code to clear the flag first
and insert synchronize_rcu() before we remove the upper. But looks like
the explicit fallback to loopback_dev is an established pattern.
And I guess avoiding the synchronize_rcu() is nice, too.
In the Linux kernel, the following vulnerability has been resolved:
smb: client: Don't log plaintext credentials in cifs_set_cifscreds
When debug logging is enabled, cifs_set_cifscreds() logs the key
payload and exposes the plaintext username and password. Remove the
debug log to avoid exposing credentials.
In the Linux kernel, the following vulnerability has been resolved:
net: annotate data-races around sk->sk_{data_ready,write_space}
skmsg (and probably other layers) are changing these pointers
while other cpus might read them concurrently.
Add corresponding READ_ONCE()/WRITE_ONCE() annotations
for UDP, TCP and AF_UNIX.
In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: Add allocation failure check for Entity name
Currently find_sdca_entity_iot() can allocate a string for the
Entity name but it doesn't check if that allocation succeeded.
Add the missing NULL check after the allocation.
In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
When a standalone IPv6 nexthop object is created with a loopback device
(e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies
it as a reject route. This is because nexthop objects have no destination
prefix (fc_dst=::), causing fib6_is_reject() to match any loopback
nexthop. The reject path skips fib_nh_common_init(), leaving
nhc_pcpu_rth_output unallocated. If an IPv4 route later references this
nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and
panics.
Simplify the check in fib6_nh_init() to only match explicit reject
routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback
promotion heuristic in fib6_is_reject() is handled separately by
ip6_route_info_create_nh(). After this change, the three cases behave
as follows:
1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"):
RTF_REJECT is set, enters reject path, skips fib_nh_common_init().
No behavior change.
2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. ip6_route_info_create_nh() still promotes it to reject
afterward. nhc_pcpu_rth_output is allocated but unused, which is
harmless.
3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. nhc_pcpu_rth_output is properly allocated, fixing the crash
when IPv4 routes reference this nexthop.
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: purge error queues in socket destructors
When TX timestamping is enabled via SO_TIMESTAMPING, SKBs may be queued
into sk_error_queue and will stay there until consumed. If userspace never
gets to read the timestamps, or if the controller is removed unexpectedly,
these SKBs will leak.
Fix by adding skb_queue_purge() calls for sk_error_queue in affected
bluetooth destructors. RFCOMM does not currently use sk_error_queue.
In the Linux kernel, the following vulnerability has been resolved:
can: ucan: Fix infinite loop from zero-length messages
If a broken ucan device gets a message with the message length field set
to 0, then the driver will loop for forever in
ucan_read_bulk_callback(), hanging the system. If the length is 0, just
skip the message and go on to the next one.
This has been fixed in the kvaser_usb driver in the past in commit
0c73772cd2b8 ("can: kvaser_usb: leaf: Fix potential infinite loop in
command parsers"), so there must be some broken devices out there like
this somewhere.
In the Linux kernel, the following vulnerability has been resolved:
nfsd: Fix cred ref leak in nfsd_nl_threads_set_doit().
syzbot reported memory leak of struct cred. [0]
nfsd_nl_threads_set_doit() passes get_current_cred() to
nfsd_svc(), but put_cred() is not called after that.
The cred is finally passed down to _svc_xprt_create(),
which calls get_cred() with the cred for struct svc_xprt.
The ownership of the refcount by get_current_cred() is not
transferred to anywhere and is just leaked.
nfsd_svc() is also called from write_threads(), but it does
not bump file->f_cred there.
nfsd_nl_threads_set_doit() is called from sendmsg() and
current->cred does not go away.
Let's use current_cred() in nfsd_nl_threads_set_doit().
[0]:
BUG: memory leak
unreferenced object 0xffff888108b89480 (size 184):
comm "syz-executor", pid 5994, jiffies 4294943386
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 369454a7):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4958 [inline]
slab_alloc_node mm/slub.c:5263 [inline]
kmem_cache_alloc_noprof+0x412/0x580 mm/slub.c:5270
prepare_creds+0x22/0x600 kernel/cred.c:185
copy_creds+0x44/0x290 kernel/cred.c:286
copy_process+0x7a7/0x2870 kernel/fork.c:2086
kernel_clone+0xac/0x6e0 kernel/fork.c:2651
__do_sys_clone+0x7f/0xb0 kernel/fork.c:2792
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Fix refcount leak for tagset_refcnt
This leak will cause a hang when tearing down the SCSI host. For example,
iscsid hangs with the following call trace:
[130120.652718] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
PID: 2528 TASK: ffff9d0408974e00 CPU: 3 COMMAND: "iscsid"
#0 [ffffb5b9c134b9e0] __schedule at ffffffff860657d4
#1 [ffffb5b9c134ba28] schedule at ffffffff86065c6f
#2 [ffffb5b9c134ba40] schedule_timeout at ffffffff86069fb0
#3 [ffffb5b9c134bab0] __wait_for_common at ffffffff8606674f
#4 [ffffb5b9c134bb10] scsi_remove_host at ffffffff85bfe84b
#5 [ffffb5b9c134bb30] iscsi_sw_tcp_session_destroy at ffffffffc03031c4 [iscsi_tcp]
#6 [ffffb5b9c134bb48] iscsi_if_recv_msg at ffffffffc0292692 [scsi_transport_iscsi]
#7 [ffffb5b9c134bb98] iscsi_if_rx at ffffffffc02929c2 [scsi_transport_iscsi]
#8 [ffffb5b9c134bbf0] netlink_unicast at ffffffff85e551d6
#9 [ffffb5b9c134bc38] netlink_sendmsg at ffffffff85e554ef
In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix dead lock for suspend and resume
When an application issues a query IOCTL while auto suspend is running,
a deadlock can occur. The query path holds dev_lock and then calls
pm_runtime_resume_and_get(), which waits for the ongoing suspend to
complete. Meanwhile, the suspend callback attempts to acquire dev_lock
and blocks, resulting in a deadlock.
Fix this by releasing dev_lock before calling pm_runtime_resume_and_get()
and reacquiring it after the call completes. Also acquire dev_lock in the
resume callback to keep the locking consistent.
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix race in devmap on PREEMPT_RT
On PREEMPT_RT kernels, the per-CPU xdp_dev_bulk_queue (bq) can be
accessed concurrently by multiple preemptible tasks on the same CPU.
The original code assumes bq_enqueue() and __dev_flush() run atomically
with respect to each other on the same CPU, relying on
local_bh_disable() to prevent preemption. However, on PREEMPT_RT,
local_bh_disable() only calls migrate_disable() (when
PREEMPT_RT_NEEDS_BH_LOCK is not set) and does not disable
preemption, which allows CFS scheduling to preempt a task during
bq_xmit_all(), enabling another task on the same CPU to enter
bq_enqueue() and operate on the same per-CPU bq concurrently.
This leads to several races:
1. Double-free / use-after-free on bq->q[]: bq_xmit_all() snapshots
cnt = bq->count, then iterates bq->q[0..cnt-1] to transmit frames.
If preempted after the snapshot, a second task can call bq_enqueue()
-> bq_xmit_all() on the same bq, transmitting (and freeing) the
same frames. When the first task resumes, it operates on stale
pointers in bq->q[], causing use-after-free.
2. bq->count and bq->q[] corruption: concurrent bq_enqueue() modifying
bq->count and bq->q[] while bq_xmit_all() is reading them.
3. dev_rx/xdp_prog teardown race: __dev_flush() clears bq->dev_rx and
bq->xdp_prog after bq_xmit_all(). If preempted between
bq_xmit_all() return and bq->dev_rx = NULL, a preempting
bq_enqueue() sees dev_rx still set (non-NULL), skips adding bq to
the flush_list, and enqueues a frame. When __dev_flush() resumes,
it clears dev_rx and removes bq from the flush_list, orphaning the
newly enqueued frame.
4. __list_del_clearprev() on flush_node: similar to the cpumap race,
both tasks can call __list_del_clearprev() on the same flush_node,
the second dereferences the prev pointer already set to NULL.
The race between task A (__dev_flush -> bq_xmit_all) and task B
(bq_enqueue -> bq_xmit_all) on the same CPU:
Task A (xdp_do_flush) Task B (ndo_xdp_xmit redirect)
---------------------- --------------------------------
__dev_flush(flush_list)
bq_xmit_all(bq)
cnt = bq->count /* e.g. 16 */
/* start iterating bq->q[] */
<-- CFS preempts Task A -->
bq_enqueue(dev, xdpf)
bq->count == DEV_MAP_BULK_SIZE
bq_xmit_all(bq, 0)
cnt = bq->count /* same 16! */
ndo_xdp_xmit(bq->q[])
/* frames freed by driver */
bq->count = 0
<-- Task A resumes -->
ndo_xdp_xmit(bq->q[])
/* use-after-free: frames already freed! */
Fix this by adding a local_lock_t to xdp_dev_bulk_queue and acquiring
it in bq_enqueue() and __dev_flush(). These paths already run under
local_bh_disable(), so use local_lock_nested_bh() which on non-RT is
a pure annotation with no overhead, and on PREEMPT_RT provides a
per-CPU sleeping lock that serializes access to the bq.
In the Linux kernel, the following vulnerability has been resolved:
net: vxlan: fix nd_tbl NULL dereference when IPv6 is disabled
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. If an IPv6 packet is injected into the interface,
route_shortcircuit() is called and a NULL pointer dereference happens on
neigh_lookup().
BUG: kernel NULL pointer dereference, address: 0000000000000380
Oops: Oops: 0000 [#1] SMP NOPTI
[...]
RIP: 0010:neigh_lookup+0x20/0x270
[...]
Call Trace:
<TASK>
vxlan_xmit+0x638/0x1ef0 [vxlan]
dev_hard_start_xmit+0x9e/0x2e0
__dev_queue_xmit+0xbee/0x14e0
packet_sendmsg+0x116f/0x1930
__sys_sendto+0x1f5/0x200
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x12f/0x1590
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix this by adding an early check on route_shortcircuit() when protocol
is ETH_P_IPV6. Note that ipv6_mod_enabled() cannot be used here because
VXLAN can be built-in even when IPv6 is built as a module.
In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Fix recursive locking in __configfs_open_file()
In flush_write_buffer, &p->frag_sem is acquired and then the loaded store
function is called, which, here, is target_core_item_dbroot_store(). This
function called filp_open(), following which these functions were called
(in reverse order), according to the call trace:
down_read
__configfs_open_file
do_dentry_open
vfs_open
do_open
path_openat
do_filp_open
file_open_name
filp_open
target_core_item_dbroot_store
flush_write_buffer
configfs_write_iter
target_core_item_dbroot_store() tries to validate the new file path by
trying to open the file path provided to it; however, in this case, the bug
report shows:
db_root: not a directory: /sys/kernel/config/target/dbroot
indicating that the same configfs file was tried to be opened, on which it
is currently working on. Thus, it is trying to acquire frag_sem semaphore
of the same file of which it already holds the semaphore obtained in
flush_write_buffer(), leading to acquiring the semaphore in a nested manner
and a possibility of recursive locking.
Fix this by modifying target_core_item_dbroot_store() to use kern_path()
instead of filp_open() to avoid opening the file using filesystem-specific
function __configfs_open_file(), and further modifying it to make this fix
compatible.
In the Linux kernel, the following vulnerability has been resolved:
nfc: pn533: properly drop the usb interface reference on disconnect
When the device is disconnected from the driver, there is a "dangling"
reference count on the usb interface that was grabbed in the probe
callback. Fix this up by properly dropping the reference after we are
done with it.
In the Linux kernel, the following vulnerability has been resolved:
net: usb: pegasus: validate USB endpoints
The pegasus driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints.
In the Linux kernel, the following vulnerability has been resolved:
IB/mthca: Add missed mthca_unmap_user_db() for mthca_create_srq()
Fix a user triggerable leak on the system call failure path.
In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix out-of-bounds memset in command slot handling
The remaining space in a command slot may be smaller than the size of
the command header. Clearing the command header with memset() before
verifying the available slot space can result in an out-of-bounds write
and memory corruption.
Fix this by moving the memset() call after the size validation.
In the Linux kernel, the following vulnerability has been resolved:
irqchip/sifive-plic: Fix frozen interrupt due to affinity setting
PLIC ignores interrupt completion message for disabled interrupt, explained
by the specification:
The PLIC signals it has completed executing an interrupt handler by
writing the interrupt ID it received from the claim to the
claim/complete register. The PLIC does not check whether the completion
ID is the same as the last claim ID for that target. If the completion
ID does not match an interrupt source that is currently enabled for
the target, the completion is silently ignored.
This caused problems in the past, because an interrupt can be disabled
while still being handled and plic_irq_eoi() had no effect. That was fixed
by checking if the interrupt is disabled, and if so enable it, before
sending the completion message. That check is done with irqd_irq_disabled().
However, that is not sufficient because the enable bit for the handling
hart can be zero despite irqd_irq_disabled(d) being false. This can happen
when affinity setting is changed while a hart is still handling the
interrupt.
This problem is easily reproducible by dumping a large file to uart (which
generates lots of interrupts) and at the same time keep changing the uart
interrupt's affinity setting. The uart port becomes frozen almost
instantaneously.
Fix this by checking PLIC's enable bit instead of irqd_irq_disabled().
In the Linux kernel, the following vulnerability has been resolved:
atm: lec: fix null-ptr-deref in lec_arp_clear_vccs
syzkaller reported a null-ptr-deref in lec_arp_clear_vccs().
This issue can be easily reproduced using the syzkaller reproducer.
In the ATM LANE (LAN Emulation) module, the same atm_vcc can be shared by
multiple lec_arp_table entries (e.g., via entry->vcc or entry->recv_vcc).
When the underlying VCC is closed, lec_vcc_close() iterates over all
ARP entries and calls lec_arp_clear_vccs() for each matched entry.
For example, when lec_vcc_close() iterates through the hlists in
priv->lec_arp_empty_ones or other ARP tables:
1. In the first iteration, for the first matched ARP entry sharing the VCC,
lec_arp_clear_vccs() frees the associated vpriv (which is vcc->user_back)
and sets vcc->user_back to NULL.
2. In the second iteration, for the next matched ARP entry sharing the same
VCC, lec_arp_clear_vccs() is called again. It obtains a NULL vpriv from
vcc->user_back (via LEC_VCC_PRIV(vcc)) and then attempts to dereference it
via `vcc->pop = vpriv->old_pop`, leading to a null-ptr-deref crash.
Fix this by adding a null check for vpriv before dereferencing
it. If vpriv is already NULL, it means the VCC has been cleared
by a previous call, so we can safely skip the cleanup and just
clear the entry's vcc/recv_vcc pointers.
The entire cleanup block (including vcc_release_async()) is placed inside
the vpriv guard because a NULL vpriv indicates the VCC has already been
fully released by a prior iteration — repeating the teardown would
redundantly set flags and trigger callbacks on an already-closing socket.
The Fixes tag points to the initial commit because the entry->vcc path has
been vulnerable since the original code. The entry->recv_vcc path was later
added by commit 8d9f73c0ad2f ("atm: fix a memory leak of vcc->user_back")
with the same pattern, and both paths are fixed here.
In the Linux kernel, the following vulnerability has been resolved:
drbd: fix null-pointer dereference on local read error
In drbd_request_endio(), READ_COMPLETED_WITH_ERROR is passed to
__req_mod() with a NULL peer_device:
__req_mod(req, what, NULL, &m);
The READ_COMPLETED_WITH_ERROR handler then unconditionally passes this
NULL peer_device to drbd_set_out_of_sync(), which dereferences it,
causing a null-pointer dereference.
Fix this by obtaining the peer_device via first_peer_device(device),
matching how drbd_req_destroy() handles the same situation.
In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: Reset prog ptr to old_prog in case of error in mtk_xdp_setup()
Reset eBPF program pointer to old_prog and do not decrease its ref-count
if mtk_open routine in mtk_xdp_setup() fails.
In the Linux kernel, the following vulnerability has been resolved:
regulator: fp9931: Fix PM runtime reference leak in fp9931_hwmon_read()
In fp9931_hwmon_read(), if regmap_read() failed, the function returned
the error code without calling pm_runtime_put_autosuspend(), causing
a PM reference leak.
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix oops due to uninitialised var in smb2_unlink()
If SMB2_open_init() or SMB2_close_init() fails (e.g. reconnect), the
iovs set @rqst will be left uninitialised, hence calling
SMB2_open_free(), SMB2_close_free() or smb2_set_related() on them will
oops.
Fix this by initialising @close_iov and @open_iov before setting them
in @rqst.
In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: fix use-after-free in lbs_free_adapter()
The lbs_free_adapter() function uses timer_delete() (non-synchronous)
for both command_timer and tx_lockup_timer before the structure is
freed. This is incorrect because timer_delete() does not wait for
any running timer callback to complete.
If a timer callback is executing when lbs_free_adapter() is called,
the callback will access freed memory since lbs_cfg_free() frees the
containing structure immediately after lbs_free_adapter() returns.
Both timer callbacks (lbs_cmd_timeout_handler and lbs_tx_lockup_handler)
access priv->driver_lock, priv->cur_cmd, priv->dev, and other fields,
which would all be use-after-free violations.
Use timer_delete_sync() instead to ensure any running timer callback
has completed before returning.
This bug was introduced in commit 8f641d93c38a ("libertas: detect TX
lockups and reset hardware") where del_timer() was used instead of
del_timer_sync() in the cleanup path. The command_timer has had the
same issue since the driver was first written.
In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Prevent ubuf size overflow
The ubuf size calculation may overflow, resulting in an undersized
allocation and possible memory corruption.
Use check_add_overflow() helpers to validate the size calculation before
allocation.
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix NULL pointer dereference in mesh_rx_csa_frame()
In mesh_rx_csa_frame(), elems->mesh_chansw_params_ie is dereferenced
at lines 1638 and 1642 without a prior NULL check:
ifmsh->chsw_ttl = elems->mesh_chansw_params_ie->mesh_ttl;
...
pre_value = le16_to_cpu(elems->mesh_chansw_params_ie->mesh_pre_value);
The mesh_matches_local() check above only validates the Mesh ID,
Mesh Configuration, and Supported Rates IEs. It does not verify the
presence of the Mesh Channel Switch Parameters IE (element ID 118).
When a received CSA action frame omits that IE, ieee802_11_parse_elems()
leaves elems->mesh_chansw_params_ie as NULL, and the unconditional
dereference causes a kernel NULL pointer dereference.
A remote mesh peer with an established peer link (PLINK_ESTAB) can
trigger this by sending a crafted SPECTRUM_MGMT/CHL_SWITCH action frame
that includes a matching Mesh ID and Mesh Configuration IE but omits the
Mesh Channel Switch Parameters IE. No authentication beyond the default
open mesh peering is required.
Crash confirmed on kernel 6.17.0-5-generic via mac80211_hwsim:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:ieee80211_mesh_rx_queued_mgmt+0x143/0x2a0 [mac80211]
CR2: 0000000000000000
Fix by adding a NULL check for mesh_chansw_params_ie after
mesh_matches_local() returns, consistent with how other optional IEs
are guarded throughout the mesh code.
The bug has been present since v3.13 (released 2014-01-19).
Sending a maliciously crafted message to the kea-ctrl-agent, kea-dhcp-ddns, kea-dhcp4, or kea-dhcp6 daemons over any configured API socket or HA listener can cause the receiving daemon to exit with a stack overflow error.
This issue affects Kea versions 2.6.0 through 2.6.4 and 3.0.0 through 3.0.2.
SHARP routers do not perform authentication for some web APIs. The device information may be retrieved without authentication. If the administrative password of the device is left as the initial one, the device may be taken over.
SANUPS SOFTWARE provided by SANYO DENKI CO., LTD. registers Windows services with unquoted file paths. A user with the write permission on the root directory of the system drive may execute arbitrary code with SYSTEM privilege.
The PeproDev Ultimate Invoice WordPress plugin through 2.2.5 has a bulk download invoices action that generates ZIP archives containing exported invoice PDFs. The ZIP files are named predictably making it possible to brute force and retreive PII.
The installer for OM Workspace (Windows Edition) Ver 2.4 and earlier insecurely loads Dynamic Link Libraries (DLLs), which could allow an attacker to execute arbitrary code with the privileges of the user invoking the installer.
A vulnerability was found in code-projects Simple Laundry System 1.0. This affects an unknown function of the file /checkcheckout.php of the component Parameter Handler. The manipulation of the argument serviceId results in sql injection. It is possible to launch the attack remotely. The exploit has been made public and could be used.
The Easy Image Gallery plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the Gallery shortcode post meta field in all versions up to, and including, 1.5.3. This is due to insufficient input sanitization and output escaping on user-supplied gallery shortcode values. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
A vulnerability has been found in itsourcecode College Management System 1.0. The impacted element is an unknown function of the file /admin/add-single-student-results.php of the component Parameter Handler. The manipulation of the argument course_code leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.
The issue was addressed with improved checks. This issue is fixed in iOS 26.4 and iPadOS 26.4. An attacker with physical access to an iOS device with Stolen Device Protection enabled may be able to access biometrics-gated Protected Apps with the passcode.
A denial-of-service issue was addressed with improved input validation. This issue is fixed in iOS 26.4 and iPadOS 26.4, macOS Sequoia 15.7.5, macOS Sonoma 14.8.5, macOS Tahoe 26.4. A remote attacker may be able to cause a denial-of-service.
A privacy issue was addressed with improved handling of temporary files. This issue is fixed in macOS Tahoe 26.4. A document may be written to a temporary file when using print preview.
A permissions issue was addressed by removing the vulnerable code. This issue is fixed in macOS Sequoia 15.7.5, macOS Sonoma 14.8.5, macOS Tahoe 26.4. An app may be able to modify protected parts of the file system.