CVE Database

A flaw was found in ofono, an Open Source Telephony on Linux. A stack overflow bug is triggered within the decode_submit_report() function during the SMS decoding. It is assumed that the attack scenario is accessible from a compromised modem, a malicious base station, or just SMS. There is a bound check for this memcpy length in decode_submit(), but it was forgotten in decode_submit_report().

A flaw was found in ofono, an Open Source Telephony on Linux. A stack overflow bug is triggered within the sms_decode_address_field() function during the SMS PDU decoding. It is assumed that the attack scenario is accessible from a compromised modem, a malicious base station, or just SMS.

A flaw was found in ofono, an Open Source Telephony on Linux. A stack overflow bug is triggered within the decode_status_report() function during the SMS decoding. It is assumed that the attack scenario is accessible from a compromised modem, a malicious base station, or just SMS. There is a bound check for this memcpy length in decode_submit(), but it was forgotten in decode_status_report().

FFmpeg version n6.1 was discovered to contain a heap buffer overflow vulnerability in the draw_block_rectangle function of libavfilter/vf_codecview.c. This vulnerability allows attackers to cause undefined behavior or a Denial of Service (DoS) via crafted input.

An issue in `coap_pdu.c` in libcoap 4.3.4 allows attackers to cause undefined behavior via a sequence of messages leading to unsigned integer overflow.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix incorrect mpc_combine array size [why] MAX_SURFACES is per stream, while MAX_PLANES is per asic. The mpc_combine is an array that records all the planes per asic. Therefore MAX_PLANES should be used as the array size. Using MAX_SURFACES causes array overflow when there are more than 3 planes. [how] Use the MAX_PLANES for the mpc_combine array size.

FFmpeg version n6.1.1 was discovered to contain a heap use-after-free via the av_hwframe_ctx_init function.

A data integrity vulnerability exists in the web interface /cgi-bin/upload_config.cgi functionality of Peplink Smart Reader v1.2.0 (in QEMU). A specially crafted HTTP request can lead to configuration modification. An attacker can make an unauthenticated HTTP request to trigger this vulnerability.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: think-lmi: Fix password opcode ordering for workstations The Lenovo workstations require the password opcode to be run before the attribute value is changed (if Admin password is enabled). Tested on some Thinkpads to confirm they are OK with this order too.

Out-of-Bounds read in ciCCIOTOPT in ASR180X will cause incorrect computations.

The Web interface of Evolution Controller Versions 2.04.560.31.03.2024 and below contains poorly configured access control on MOBILE_GET_USERS_LIST, allowing for an unauthenticated attacker to enumerate all users and their access levels

The Web interface of Evolution Controller Versions 2.04.560.31.03.2024 and below contains poorly configured access control on DESKTOP_EDIT_USER_GET_ABACARD_FIELDS, allowing for an unauthenticated attacker to return the abacard field of any user

The Web interface of Evolution Controller Versions 2.04.560.31.03.2024 and below contains poorly configured access control on DESKTOP_EDIT_USER_GET_KEYS_FIELDS, allowing for an unauthenticated attacker to return the keys value of any user

The Web interface of Evolution Controller Versions 2.04.560.31.03.2024 and below contains poorly configured access control on DESKTOP_EDIT_USER_GET_PIN_FIELDS, allowing for an unauthenticated attacker to return the pin value of any user

The Web interface of Evolution Controller Versions 2.04.560.31.03.2024 and below contains poorly configured access control on DESKTOP_EDIT_USER_GET_CARD, allowing for an unauthenticated attacker to return the card value data of any user

The Web interface of Evolution Controller Versions 2.04.560.31.03.2024 and below does not proper sanitize user input, allowing for an unauthenticated attacker to crash the controller software

The Web interface of Evolution Controller Versions 2.04.560.31.03.2024 and below uses poor session management, allowing for an unauthenticated attacker to access administrator functionality if any other user is already signed in.

Traefik is an HTTP reverse proxy and load balancer. In affected versions sending a GET request to any Traefik endpoint with the "Content-length" request header results in an indefinite hang with the default configuration. This vulnerability can be exploited by attackers to induce a denial of service. This vulnerability has been addressed in version 2.11.2 and 3.0.0-rc5. Users are advised to upgrade. For affected versions, this vulnerability can be mitigated by configuring the readTimeout option.

Unrestricted file upload vulnerability in OpenGnsys affecting version 1.1.1d (Espeto). This vulnerability allows an attacker to send a POST request to the endpoint '/opengnsys/images/M_Icons.php' modifying the file extension, due to lack of file extension verification, resulting in a webshell injection.

The server in Circontrol Raption through 5.11.2 has a pre-authentication stack-based buffer overflow that can be exploited to gain run-time control of the device as root. The ocpp1.5 and pwrstudio binaries on the charging station do not use a number of common exploitation mitigations. In particular, there are no stack canaries and they do not use the Position Independent Executable (PIE) format.

Buffer Overflow vulnerability in FFmpeg version n6.1-3-g466799d4f5, allows a local attacker to execute arbitrary code and cause a denial of service (DoS) via the af_dialoguenhance.c:261:5 in the de_stereo component.

eventlet before 0.35.2, as used in dnspython before 2.6.0, allows remote attackers to interfere with DNS name resolution by quickly sending an invalid packet from the expected IP address and source port, aka a "TuDoor" attack. In other words, dnspython does not have the preferred behavior in which the DNS name resolution algorithm would proceed, within the full time window, in order to wait for a valid packet. NOTE: dnspython 2.6.0 is unusable for a different reason that was addressed in 2.6.1.

IBM Security Verify Access Appliance 10.0.0 through 10.0.7 contains hard-coded credentials which it uses for its own inbound authentication that could be obtained by a malicious actor. IBM X-Force ID: 287317.

IBM Security Verify Access Appliance 10.0.0 through 10.0.7 could allow a malicious actor to conduct a man in the middle attack when deploying Open Source scripts due to missing certificate validation. IBM X-Force ID: 287316.

IBM Security Verify Access Appliance 10.0.0 through 10.0.7 could allow a malicious actor to conduct a man in the middle attack when deploying Python scripts due to improper certificate validation. IBM X-Force ID: 287306.

HTTP/2 CONTINUATION DoS attack can cause Apache Traffic Server to consume more resources on the server.  Version from 8.0.0 through 8.1.9, from 9.0.0 through 9.2.3 are affected. Users can set a new setting (proxy.config.http2.max_continuation_frames_per_minute) to limit the number of CONTINUATION frames per minute.  ATS does have a fixed amount of memory a request can use and ATS adheres to these limits in previous releases. Users are recommended to upgrade to versions 8.1.10 or 9.2.4 which fixes the issue.

A vulnerability was found in csmock where a regular user of the OSH service (anyone with a valid Kerberos ticket) can use the vulnerability to disclose the confidential Snyk authentication token and to run arbitrary commands on OSH workers.

A flaw was found in ofono, an Open Source Telephony on Linux. A stack overflow bug is triggered within the decode_deliver() function during the SMS decoding. It is assumed that the attack scenario is accessible from a compromised modem, a malicious base station, or just SMS. There is a bound check for this memcpy length in decode_submit(), but it was forgotten in decode_deliver().

The EnvíaloSimple: Email Marketing y Newsletters plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 2.3. This is due to missing or incorrect nonce validation on the gallery_add function. This makes it possible for unauthenticated attackers to upload malicious files via a forged request granted they can trick a site administrator into performing an action such as clicking on a link.

SmartScreen Prompt Security Feature Bypass Vulnerability

A stack-based buffer overflow vulnerability exists in the web interface Radio Scheduling functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability refers specifically to the overflow that occurs via the `action` parameter at offset `0x422448` of the `httpd` binary shipped with v5.0.4 Build 20220216 of the EAP115.

A stack-based buffer overflow vulnerability exists in the web interface Radio Scheduling functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability refers specifically to the overflow that occurs via the `profile` parameter at offset `0x4224b0` of the `httpd` binary shipped with v5.0.4 Build 20220216 of the EAP115.

A stack-based buffer overflow vulnerability exists in the web interface Radio Scheduling functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability refers specifically to the overflow that occurs via the `band` parameter at offset `0x422420` of the `httpd` binary shipped with v5.0.4 Build 20220216 of the EAP115.

A stack-based buffer overflow vulnerability exists in the web interface Radio Scheduling functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability refers specifically to the overflow that occurs via the `ssid` parameter at offset `0x42247c` of the `httpd` binary shipped with v5.0.4 Build 20220216 of the EAP115.

A stack-based buffer overflow vulnerability exists in the web interface Radio Scheduling functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability refers specifically to the overflow that occurs via the `action` parameter at offset `0x0045ab38` of the `httpd_portal` binary shipped with v5.1.0 Build 20220926 of the EAP225.

A stack-based buffer overflow vulnerability exists in the web interface Radio Scheduling functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability refers specifically to the overflow that occurs via the `profile` parameter at offset `0x0045abc8` of the `httpd_portal` binary shipped with v5.1.0 Build 20220926 of the EAP225.

A stack-based buffer overflow vulnerability exists in the web interface Radio Scheduling functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability refers specifically to the overflow that occurs via the `band` parameter at offset `0x0045aad8` of the `httpd_portal` binary shipped with v5.1.0 Build 20220926 of the EAP225.

A stack-based buffer overflow vulnerability exists in the web interface Radio Scheduling functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability refers specifically to the overflow that occurs via the `ssid` parameter at offset `0x0045ab7c` of the `httpd_portal` binary shipped with v5.1.0 Build 20220926 of the EAP225.

A command execution vulnerability exists in the tddpd enable_test_mode functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926 and Tp-Link N300 Wireless Access Point (EAP115 V4) v5.0.4 Build 20220216. A specially crafted series of network requests can lead to arbitrary command execution. An attacker can send a sequence of unauthenticated packets to trigger this vulnerability.This vulnerability impacts `uclited` on the EAP115(V4) 5.0.4 Build 20220216 of the N300 Wireless Gigabit Access Point.

A command execution vulnerability exists in the tddpd enable_test_mode functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926 and Tp-Link N300 Wireless Access Point (EAP115 V4) v5.0.4 Build 20220216. A specially crafted series of network requests can lead to arbitrary command execution. An attacker can send a sequence of unauthenticated packets to trigger this vulnerability.This vulnerability impacts `uclited` on the EAP225(V3) 5.1.0 Build 20220926 of the AC1350 Wireless MU-MIMO Gigabit Access Point.

A denial of service vulnerability exists in the TDDP functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of network requests can lead to reset to factory settings. An attacker can send a sequence of unauthenticated packets to trigger this vulnerability.

A memory corruption vulnerability exists in the web interface functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted HTTP POST request can lead to denial of service of the device's web interface. An attacker can send an unauthenticated HTTP POST request to trigger this vulnerability.

A vulnerability has been identified in JT2Go (All versions < V2312.0004), Parasolid V35.1 (All versions < V35.1.254), Parasolid V36.0 (All versions < V36.0.207), Parasolid V36.1 (All versions < V36.1.147), Teamcenter Visualization V14.2 (All versions < V14.2.0.12), Teamcenter Visualization V14.3 (All versions < V14.3.0.9), Teamcenter Visualization V2312 (All versions < V2312.0004). The affected applications contain an out of bounds read past the end of an allocated structure while parsing specially crafted X_T files. This could allow an attacker to execute code in the context of the current process.

A flaw was found in` JwtValidator.resolvePublicKey` in JBoss EAP, where the validator checks jku and sends a HTTP request. During this process, no whitelisting or other filtering behavior is performed on the destination URL address, which may result in a server-side request forgery (SSRF) vulnerability.

An attacker can make the Node.js HTTP/2 server completely unavailable by sending a small amount of HTTP/2 frames packets with a few HTTP/2 frames inside. It is possible to leave some data in nghttp2 memory after reset when headers with HTTP/2 CONTINUATION frame are sent to the server and then a TCP connection is abruptly closed by the client triggering the Http2Session destructor while header frames are still being processed (and stored in memory) causing a race condition.

Due to improper validation, SAP BusinessObject Business Intelligence Launch Pad allows an authenticated attacker to access operating system information using crafted document. On successful exploitation there could be a considerable impact on confidentiality of the application.

Out of bounds memory access in V8 in Google Chrome prior to 123.0.6312.105 allowed a remote attacker to perform arbitrary read/write via a crafted HTML page. (Chromium security severity: High)

Use after free in Bookmarks in Google Chrome prior to 123.0.6312.105 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)

Inappropriate implementation in V8 in Google Chrome prior to 123.0.6312.105 allowed a remote attacker to potentially perform out of bounds memory access via a crafted HTML page. (Chromium security severity: High)

there is a possible way to bypass due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation.