A security flaw has been discovered in UTT 进取 520W 1.7.7-180627. This impacts the function strcpy of the file /goform/ConfigWirelessBase. Performing a manipulation of the argument ssid results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was identified in UTT 进取 520W 1.7.7-180627. This affects the function strcpy of the file /goform/formFireWall. Such manipulation of the argument GroupName leads to buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was determined in UTT 进取 520W 1.7.7-180627. The impacted element is the function strcpy of the file /goform/formConfigFastDirectionW. This manipulation of the argument ssid causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was determined in quickjs-ng quickjs up to 0.11.0. This vulnerability affects the function js_typed_array_constructor of the file quickjs.c. Executing a manipulation can lead to heap-based buffer overflow. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. This patch is called c5d80831e51e48a83eab16ea867be87f091783c5. A patch should be applied to remediate this issue.
Authentication Bypass by Spoofing vulnerability in Apache NimBLE.
Receiving specially crafted Security Request could lead to removal of original bond and re-bond with impostor.
This issue affects Apache NimBLE: through 1.8.0.
Users are recommended to upgrade to version 1.9.0, which fixes the issue.
NULL Pointer Dereference vulnerability in Apache Nimble.
Missing validation of HCI connection complete or HCI command TX buffer could lead to NULL pointer dereference.
This issue requires disabled asserts and broken or bogus Bluetooth controller and thus severity is considered low.
This issue affects Apache NimBLE: through 1.8.0.
Users are recommended to upgrade to version 1.9.0, which fixes the issue.
J2EE Misconfiguration: Data Transmission Without Encryption vulnerability in Apache NimBLE.
Improper handling of Pause Encryption procedure on Link Layer results in a previously encrypted connection being left in un-encrypted state allowing an eavesdropper to observe the remainder of the exchange.
This issue affects Apache NimBLE: through <= 1.8.0.
Users are recommended to upgrade to version 1.9.0, which fixes the issue.
A security flaw has been discovered in Sangfor Operation and Maintenance Management System up to 3.0.8. The impacted element is an unknown function of the file /fort/trust/version/common/common.jsp. Performing a manipulation of the argument File results in unrestricted upload. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was identified in Sangfor Operation and Maintenance Management System up to 3.0.8. The affected element is the function SessionController of the file /isomp-protocol/protocol/session. Such manipulation of the argument Hostname leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
ComfyUI-Manager is an extension designed to enhance the usability of ComfyUI. Prior to versions 3.39.2 and 4.0.5, an attacker can inject special characters into HTTP query parameters to add arbitrary configuration values to the config.ini file. This can lead to security setting tampering or modification of application behavior. This issue has been patched in versions 3.39.2 and 4.0.5.
HAX CMS helps manage microsite universe with PHP or NodeJs backends. In versions 11.0.6 to before 25.0.0, HAX CMS is vulnerable to stored XSS, which could lead to account takeover. This issue has been patched in version 25.0.0.
RustCrypto: Elliptic Curves is general purpose Elliptic Curve Cryptography (ECC) support, including types and traits for representing various elliptic curve forms, scalars, points, and public/secret keys composed thereof. In versions 0.14.0-pre.0 and 0.14.0-rc.0, a denial-of-service vulnerability exists in the SM2 public-key encryption (PKE) implementation: the decrypt() path performs unchecked slice::split_at operations on input buffers derived from untrusted ciphertext. An attacker can submit short/undersized ciphertext or carefully-crafted DER-encoded structures to trigger bounds-check panics (Rust unwinding) which crash the calling thread or process. This issue has been patched via commit e60e991.
RustCrypto: Elliptic Curves is general purpose Elliptic Curve Cryptography (ECC) support, including types and traits for representing various elliptic curve forms, scalars, points, and public/secret keys composed thereof. In versions 0.14.0-pre.0 and 0.14.0-rc.0, a denial-of-service vulnerability exists in the SM2 PKE decryption path where an invalid elliptic-curve point (C1) is decoded and the resulting value is unwrapped without checking. Specifically, AffinePoint::from_encoded_point(&encoded_c1) may return a None/CtOption::None when the supplied coordinates are syntactically valid but do not lie on the SM2 curve. The calling code previously used .unwrap(), causing a panic when presented with such input. This issue has been patched via commit 085b7be.
RustCrypto: Elliptic Curves is general purpose Elliptic Curve Cryptography (ECC) support, including types and traits for representing various elliptic curve forms, scalars, points, and public/secret keys composed thereof. In versions 0.14.0-pre.0 and 0.14.0-rc.0, a critical vulnerability exists in the SM2 Public Key Encryption (PKE) implementation where the ephemeral nonce k is generated with severely reduced entropy. A unit mismatch error causes the nonce generation function to request only 32 bits of randomness instead of the expected 256 bits. This reduces the security of the encryption from a 128-bit level to a trivial 16-bit level, allowing a practical attack to recover the nonce k and decrypt any ciphertext given only the public key and ciphertext. This issue has been patched via commit e4f7778.
DevToys is a desktop app for developers. In versions from 2.0.0.0 to before 2.0.9.0, a path traversal vulnerability exists in the DevToys extension installation mechanism. When processing extension packages (NUPKG archives), DevToys does not sufficiently validate file paths contained within the archive. A malicious extension package could include crafted file entries such as ../../…/target-file, causing the extraction process to write files outside the intended extensions directory. This flaw enables an attacker to overwrite arbitrary files on the user’s system with the privileges of the DevToys process. Depending on the environment, this may lead to code execution, configuration tampering, or corruption of application or system files. This issue has been patched in version 2.0.9.0.
Spree is an open source e-commerce solution built with Ruby on Rails. Prior to versions 4.10.2, 5.0.7, 5.1.9, and 5.2.5, an Unauthenticated Insecure Direct Object Reference (IDOR) vulnerability was identified that allows an unauthenticated attacker to access guest address information without supplying valid credentials or session cookies. This issue has been patched in versions 4.10.2, 5.0.7, 5.1.9, and 5.2.5.
The WooCommerce Square plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 5.1.1 via the get_token_by_id function due to missing validation on a user controlled key. This makes it possible for unauthenticated attackers to expose arbitrary Square "ccof" (credit card on file) values and leverage this value to potentially make fraudulent charges on the target site.
Ghost is a Node.js content management system. In versions 5.121.0 through 5.130.5 and 6.0.0 through 6.10.3, a vulnerability in Ghost's handling of Staff Token authentication allowed certain endpoints to be accessed that were only intended to be accessible via Staff Session authentication. External systems that have been authenticated via Staff Tokens for Admin/Owner-role users would have had access to these endpoints. This issue has been patched in versions 5.130.6 and 6.11.0.
Ghost is a Node.js content management system. In versions 5.105.0 through 5.130.5 and 6.0.0 through 6.10.3, a vulnerability in Ghost's 2FA mechanism allows staff users to skip email 2FA. This issue has been patched in versions 5.130.6 and 6.11.0.
React Router is a router for React. In @remix-run/router version prior to 1.23.2. and react-router 7.0.0 through 7.11.0, React Router (and Remix v1/v2) SPA open navigation redirects originating from loaders or actions in Framework Mode, Data Mode, or the unstable RSC modes can result in unsafe URLs causing unintended javascript execution on the client. This is only an issue if you are creating redirect paths from untrusted content or via an open redirect. There is no impact if Declarative Mode (<BrowserRouter>) is being used. This issue has been patched in @remix-run/router version 1.23.2 and react-router version 7.12.0.
React Router is a router for React. In @remix-run/react version prior to 2.17.3. and react-router 7.0.0 through 7.11.0, a XSS vulnerability exists in in React Router's <ScrollRestoration> API in Framework Mode when using the getKey/storageKey props during Server-Side Rendering which could allow arbitrary JavaScript execution during SSR if untrusted content is used to generate the keys. There is no impact if server-side rendering in Framework Mode is disabled, or if Declarative Mode (<BrowserRouter>) or Data Mode (createBrowserRouter/<RouterProvider>) is being used. This issue has been patched in @remix-run/react version 2.17.3 and react-router version 7.12.0.
React Router is a router for React. In @remix-run/react versions 1.15.0 through 2.17.0. and react-router versions 7.0.0 through 7.8.2, a XSS vulnerability exists in in React Router's meta()/<Meta> APIs in Framework Mode when generating script:ld+json tags which could allow arbitrary JavaScript execution during SSR if untrusted content is used to generate the tag. There is no impact if the application is being used in Declarative Mode (<BrowserRouter>) or Data Mode (createBrowserRouter/<RouterProvider>). This issue has been patched in @remix-run/react version 2.17.1 and react-router version 7.9.0.
Fickling is a Python pickling decompiler and static analyzer. Prior to version 0.1.7, Fickling is vulnerable to detection bypass due to "builtins" blindness. This issue has been patched in version 0.1.7.
Fickling is a Python pickling decompiler and static analyzer. Prior to version 0.1.7, the unsafe_imports() method in Fickling's static analyzer fails to flag several high-risk Python modules that can be used for arbitrary code execution. Malicious pickles importing these modules will not be detected as unsafe, allowing attackers to bypass Fickling's primary static safety checks. This issue has been patched in version 0.1.7.
Fickling is a Python pickling decompiler and static analyzer. Prior to version 0.1.7, both ctypes and pydoc modules aren't explicitly blocked. Even other existing pickle scanning tools (like picklescan) do not block pydoc.locate. Chaining these two together can achieve RCE while the scanner still reports the file as LIKELY_SAFE. This issue has been patched in version 0.1.7.
Fickling is a Python pickling decompiler and static analyzer. Fickling versions up to and including 0.1.6 do not treat Python's cProfile module as unsafe. Because of this, a malicious pickle that uses cProfile.run() is classified as SUSPICIOUS instead of OVERTLY_MALICIOUS. If a user relies on Fickling's output to decide whether a pickle is safe to deserialize, this misclassification can lead them to execute attacker-controlled code on their system. This affects any workflow or product that uses Fickling as a security gate for pickle deserialization. This issue has been patched in version 0.1.7.
Fickling is a Python pickling decompiler and static analyzer. Fickling versions up to and including 0.1.6 do not treat Python’s runpy module as unsafe. Because of this, a malicious pickle that uses runpy.run_path() or runpy.run_module() is classified as SUSPICIOUS instead of OVERTLY_MALICIOUS. If a user relies on Fickling’s output to decide whether a pickle is safe to deserialize, this misclassification can lead them to execute attacker-controlled code on their system. This affects any workflow or product that uses Fickling as a security gate for pickle deserialization. This issue has been patched in version 0.1.7.
OpenProject is an open-source, web-based project management software. For OpenProject version 16.6.1 and below, a registered administrator can execute arbitrary command by configuring sendmail binary path and sending a test email. This issue has been patched in version 16.6.2.
CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. Prior to version 1.4.3, CryptoLib’s KMC crypto service integration is vulnerable to a heap buffer overflow when decoding Base64-encoded ciphertext/cleartext fields returned by the KMC service. The decode destination buffer is sized using an expected output length (len_data_out), but the Base64 decoder writes output based on the actual Base64 input length and does not enforce any destination size limit. An oversized Base64 string in the KMC JSON response can cause out-of-bounds writes on the heap, resulting in process crash and potentially code execution under certain conditions. This issue has been patched in version 1.4.3.
CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. Prior to version 1.4.3, the libcurl write_callback function in the KMC crypto service client allows unbounded memory growth by reallocating response buffers without any size limit or overflow check. A malicious KMC server can return arbitrarily large HTTP responses, forcing the client to allocate excessive memory until the process is terminated by the OS. This issue has been patched in version 1.4.3.
CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. Prior to version 1.4.3, there is an out-of-bounds heap read vulnerability in cryptography_aead_encrypt(). This issue has been patched in version 1.4.3.
CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. Prior to version 1.4.3, the Crypto_AOS_ProcessSecurity function reads memory without valid bounds checking when parsing AOS frame hashes. This issue has been patched in version 1.4.3.
CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. Prior to version 1.4.3, the Crypto_Config_Add_Gvcid_Managed_Parameters function only checks whether gvcid_counter > GVCID_MAN_PARAM_SIZE. As a result, it allows up to the 251st entry, which causes a write past the end of the array, overwriting gvcid_counter located immediately after gvcid_managed_parameters_array[250]. This leads to an out-of-bounds write, and the overwritten gvcid_counter may become an arbitrary value, potentially affecting the parameter lookup/registration logic that relies on it. This issue has been patched in version 1.4.3.
A vulnerability has been found in Sangfor Operation and Maintenance Management System up to 3.0.8. This vulnerability affects the function uploadCN of the file VersionController.java. The manipulation of the argument filename leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
Processing specially crafted workspace folder names could allow for arbitrary command injection in the Kiro GitLab Merge-Request helper in Kiro IDE before version 0.6.18 when opening maliciously crafted workspaces.
To mitigate, users should update to the latest version.
A vulnerability exists in Intelbras CFTV IP NVD 9032 R Ftd V2.800.00IB00C.0.T, which allows an unauthenticated attacker to bypass the multi-factor authentication (MFA) mechanism during the password recovery process. This results in the ability to change the admin password and gain full access to the administrative panel.
GestSup versions prior to 3.2.60 contain multiple SQL injection vulnerabilities in the asset list functionality. Multiple request parameters used to filter, search, or sort assets are incorporated into SQL queries without sufficient neutralization, allowing an authenticated attacker to manipulate database queries. Successful exploitation can result in unauthorized access to or modification of database contents depending on database privileges.
GestSup versions prior to 3.2.60 contain a SQL injection vulnerability in ticket creation functionality. User-controlled input provided during ticket creation is incorporated into SQL queries without sufficient neutralization, allowing an authenticated attacker to manipulate database queries. Successful exploitation can result in unauthorized access to or modification of database contents depending on database privileges.
GestSup versions prior to 3.2.60 contain a SQL injection vulnerability in the search bar functionality. User-controlled search input is incorporated into SQL queries without sufficient neutralization, allowing an authenticated attacker to manipulate database queries. Successful exploitation can result in unauthorized access to or modification of database contents depending on database privileges.
GestSup versions up to and including 3.2.60 contain a cross-site request forgery (CSRF) vulnerability where the application does not verify the authenticity of client requests. An attacker can induce a logged-in user to submit crafted requests that perform actions with the victim's privileges. This can be exploited to create privileged accounts by targeting the administrative user creation endpoint.
In Yonyou YonBIP v3 and before, the LoginWithV8 interface in the series data application service system is vulnerable to path traversal, allowing unauthorized access to sensitive information within the system
Improper Input Validation vulnerability in TP-Link Archer AXE75 v1.6 (vpn modules) allows an authenticated adjacent attacker to delete arbitrary server file, leading to possible loss of critical system files and service interruption or degraded functionality.This issue affects Archer AXE75 v1.6: ≤ build 20250107.
fluidsynth-2.4.6 and earlier versions is vulnerable to Null pointer dereference in fluid_synth_monopoly.c, that can be triggered when loading an invalid midi file.
Vivotek IP7137 camera with firmware version 0200a is vulnerable to command injection. Parameter "system_ntpIt" used by "/cgi-bin/admin/setparam.cgi" endpoint is not sanitized properly, allowing a user with administrative privileges to perform an attack. Due to CVE-2025-66050, administrative access is not protected by default,
The vendor has not replied to the CNA Possibly all firmware versions are affected. Since the product has met End-Of-Life phase, a fix is not expected to be released.
Vivotek IP7137 camera with firmware version 0200a is vulnerable to an information disclosure issue where live camera footage can be accessed through the RTSP protocol on port 8554 without requiring authentication. This allows unauthorized users with network access to view the camera's feed, potentially compromising user privacy and security.
The vendor has not replied to the CNA. Possibly all firmware versions are affected. Since the product has met End-Of-Life phase, a fix is not expected to be released.
GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.2.2 before 18.5.5, 18.6 before 18.6.3, and 18.7 before 18.7.1 that could have allowed an authenticated user to achieve stored cross-site scripting by exploiting GitLab Flavored Markdown.
GitLab has remediated an issue in GitLab EE affecting all versions from 18.4 before 18.5.5, 18.6 before 18.6.3, and 18.7 before 18.7.1 that could have allowed an authenticated user to access and utilize AI model settings from unauthorized namespaces by manipulating namespace identifiers in API requests.