CVE Database

The LLDP parser in tcpdump before 4.9.2 has a buffer over-read in print-lldp.c:lldp_mgmt_addr_tlv_print().

The IPv6 mobility parser in tcpdump before 4.9.2 has a buffer over-read in print-mobility.c:mobility_opt_print().

The IPv6 mobility parser in tcpdump before 4.9.2 has a buffer over-read in print-mobility.c:mobility_opt_print().

The IP parser in tcpdump before 4.9.2 has a buffer over-read in print-ip.c:ip_printroute().

The ICMPv6 parser in tcpdump before 4.9.2 has a buffer over-read in print-icmp6.c:icmp6_print().

The VTP parser in tcpdump before 4.9.2 has a buffer over-read in print-vtp.c:vtp_print().

The PGM parser in tcpdump before 4.9.2 has a buffer over-read in print-pgm.c:pgm_print().

The DHCPv6 parser in tcpdump before 4.9.2 has a buffer over-read in print-dhcp6.c:dhcp6opt_print().

The ISO ES-IS parser in tcpdump before 4.9.2 has a buffer over-read in print-isoclns.c:esis_print().

The EAP parser in tcpdump before 4.9.2 has a buffer over-read in print-eap.c:eap_print().

The White Board protocol parser in tcpdump before 4.9.2 has a buffer over-read in print-wb.c:wb_prep(), several functions.

The ARP parser in tcpdump before 4.9.2 has a buffer over-read in print-arp.c, several functions.

The BEEP parser in tcpdump before 4.9.2 has a buffer over-read in print-beep.c:l_strnstart().

The L2TP parser in tcpdump before 4.9.2 has a buffer over-read in print-l2tp.c, several functions.

The AODV parser in tcpdump before 4.9.2 has a buffer over-read in print-aodv.c:aodv_extension().

The NFS parser in tcpdump before 4.9.2 has a buffer over-read in print-nfs.c:nfs_printfh().

The IEEE 802.15.4 parser in tcpdump before 4.9.2 has a buffer over-read in print-802_15_4.c:ieee802_15_4_if_print().

The LLDP parser in tcpdump before 4.9.2 could enter an infinite loop due to a bug in print-lldp.c:lldp_private_8021_print().

The PIMv2 parser in tcpdump before 4.9.2 has a buffer over-read in print-pim.c:pimv2_print().

The DNS parser in tcpdump before 4.9.2 could enter an infinite loop due to a bug in print-domain.c:ns_print().

The BGP parser in tcpdump before 4.9.2 has a buffer over-read in print-bgp.c:bgp_attr_print().

The Juniper protocols parser in tcpdump before 4.9.2 has a buffer over-read in print-juniper.c, several functions.

The RIPng parser in tcpdump before 4.9.2 has a buffer over-read in print-ripng.c:ripng_print().

The ISAKMP parser in tcpdump before 4.9.2 could enter an infinite loop due to bugs in print-isakmp.c, several functions.

The IPv6 parser in tcpdump before 4.9.2 has a buffer over-read in print-ip6.c:ip6_print().

The Zephyr parser in tcpdump before 4.9.2 has a buffer over-read in print-zephyr.c, several functions.

The EIGRP parser in tcpdump before 4.9.2 has a buffer over-read in print-eigrp.c:eigrp_print().

The DECnet parser in tcpdump before 4.9.2 has a buffer over-read in print-decnet.c:decnet_print().

The NFS parser in tcpdump before 4.9.2 has a buffer over-read in print-nfs.c:interp_reply().

The ISO CLNS parser in tcpdump before 4.9.2 has a buffer over-read in print-isoclns.c:isoclns_print().

The ISAKMP parser in tcpdump before 4.9.2 has a buffer over-read in print-isakmp.c:isakmp_rfc3948_print().

The ICMP parser in tcpdump before 4.9.2 has a buffer over-read in print-icmp.c:icmp_print().

Several protocol parsers in tcpdump before 4.9.2 could cause a buffer over-read in addrtoname.c:lookup_bytestring().

The SMB/CIFS parser in tcpdump before 4.9.2 has a buffer over-read in smbutil.c:name_len().

Microsoft .NET Framework 2.0, 3.5, 3.5.1, 4.5.2, 4.6, 4.6.1, 4.6.2 and 4.7 allow an attacker to execute code remotely via a malicious document or application, aka ".NET Framework Remote Code Execution Vulnerability."

In MongoDB libbson 1.7.0, the bson_iter_codewscope function in bson-iter.c miscalculates a bson_utf8_validate length argument, which allows remote attackers to cause a denial of service (heap-based buffer over-read in the bson_utf8_validate function in bson-utf8.c), as demonstrated by bson-to-json.c.

A vulnerability in the UDP processing code of Cisco IOS 15.1, 15.2, and 15.4 and IOS XE 3.14 through 3.18 could allow an unauthenticated, remote attacker to cause the input queue of an affected system to hold UDP packets, causing an interface queue wedge and a denial of service (DoS) condition. The vulnerability is due to Cisco IOS Software application changes that create UDP sockets and leave the sockets idle without closing them. An attacker could exploit this vulnerability by sending UDP packets with a destination port of 0 to an affected device. A successful exploit could allow the attacker to cause UDP packets to be held in the input interfaces queue, resulting in a DoS condition. The input interface queue will stop holding UDP packets when it receives 250 packets. Cisco Bug IDs: CSCup10024, CSCva55744, CSCva95506.

Cross-site scripting (XSS) vulnerability in GE Multilink ML810/3000/3100 series switch 5.2.0 and earlier, and GE Multilink ML800/1200/1600/2400 4.2.1 and earlier.

Race condition in Apport before 2.17.2-0ubuntu1.1 as packaged in Ubuntu 15.04, before 2.14.70ubuntu8.5 as packaged in Ubuntu 14.10, before 2.14.1-0ubuntu3.11 as packaged in Ubuntu 14.04 LTS, and before 2.0.1-0ubuntu17.9 as packaged in Ubuntu 12.04 LTS allow local users to write to arbitrary files and gain root privileges.

Progress Telerik UI for ASP.NET AJAX before R2 2017 SP2 does not properly restrict user input to RadAsyncUpload, which allows remote attackers to perform arbitrary file uploads or execute arbitrary code.

Telerik.Web.UI in Progress Telerik UI for ASP.NET AJAX before R1 2017 and R2 before R2 2017 SP2 uses weak RadAsyncUpload encryption, which allows remote attackers to perform arbitrary file uploads or execute arbitrary code.

The mkostemp function in login-utils in util-linux when used incorrectly allows remote attackers to cause file name collision and possibly other attacks.

The gmp plugin in strongSwan before 5.6.0 allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via a crafted RSA signature.

The Symantec Messaging Gateway before 10.6.3-267 can encounter an issue of remote code execution, which describes a situation whereby an individual may obtain the ability to execute commands remotely on a target machine or in a target process. In this type of occurrence, after gaining access to the system, the attacker may attempt to elevate their privileges.

(1) IQVW32.sys before 1.3.1.0 and (2) IQVW64.sys before 1.3.1.0 in the Intel Ethernet diagnostics driver for Windows allows local users to cause a denial of service or possibly execute arbitrary code with kernel privileges via a crafted (a) 0x80862013, (b) 0x8086200B, (c) 0x8086200F, or (d) 0x80862007 IOCTL call.

Directory traversal vulnerability in scheduler/ui/js/ffffffffbca41eb4/UIUtilJavaScriptJS in SAP NetWeaver Application Server Java 7.5 allows remote attackers to read arbitrary files via a .. (dot dot) in the query string, as exploited in the wild in August 2017, aka SAP Security Note 2486657.

A vulnerability in the Autonomic Networking feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause autonomic nodes of an affected system to reload, resulting in a denial of service (DoS) condition. More Information: CSCvd88936. Known Affected Releases: Denali-16.2.1 Denali-16.3.1.

IBM WebSphere Portal and Web Content Manager 7.0, 8.0, 8.5, and 9.0 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 125457.

DNN (aka DotNetNuke) before 9.1.1 has Remote Code Execution via a cookie, aka "2017-08 (Critical) Possible remote code execution on DNN sites."

Citrix NetScaler SD-WAN devices through v9.1.2.26.561201 allow remote attackers to execute arbitrary shell commands as root via a CGISESSID cookie. On CloudBridge (the former name of NetScaler SD-WAN) devices, the cookie name was CAKEPHP rather than CGISESSID.