HomeBox is a home inventory and organization system. Versions prior to 0.25.0 contain a vulnerability where the defaultGroup ID remained permanently assigned to a user after being invited to a group, even after their access to that group was revoked. While the web interface correctly enforced the access revocation and prevented the user from viewing or modifying the group's contents, the API did not. Because the original group ID persisted as the user's defaultGroup, and this value was not properly validated when the X-Tenant header was omitted, the user could still perform full CRUD operations on the group's collections through the API, bypassing the intended access controls. This issue has been fixed in version 0.25.0.
The Auth0 Next.js SDK is a library for implementing user authentication in Next.js applications. In versions 4.12.0 through 4.17.1, simultaneous requests that trigger a nonce retry may cause the proxy cache fetcher to perform improper lookups for the token request results. Users are affected if their project uses both the vulnerable versions and the proxy handler /me/* and /my-org/* with DPoP enabled. This issue has been fixed in version 4.18.0.
Claude Code is an agentic coding tool. In versions prior to 2.1.75 on Windows, Claude Code loaded the system-wide default configuration from C:\ProgramData\ClaudeCode\managed-settings.json without validating directory ownership or access permissions. Because the ProgramData directory is writable by non-administrative users by default and the ClaudeCode subdirectory was not pre-created or access-restricted, a low-privileged local user could create this directory and place a malicious configuration file that would be automatically loaded for any user launching Claude Code on the same machine. Exploiting this would have required a shared multi-user Windows system and a victim user to launch Claude Code after the malicious configuration was placed. This issue has been fixed on version 2.1.75.
xrdp is an open source RDP server. Versions through 0.10.5 have a heap-based buffer overflow in the EGFX (graphics dynamic virtual channel) implementation due to insufficient validation of client-controlled size parameters, allowing an out-of-bounds write via crafted PDUs. Pre-authentication exploitation can crash the process, while post-authentication exploitation may achieve remote code execution. This issue has been fixed in version 0.10.6. If users are unable to immediately update, they should run xrdp as a non-privileged user (default since 0.10.2) to limit the impact of successful exploitation.
mcp-neo4j-cypher is an MCP server for executing Cypher queries against Neo4j databases. In versions prior to 0.6.0, the read_only mode enforcement can be bypassed using APOC CALL procedures, potentially allowing unauthorized write operations or server-side request forgery. This issue is fixed in version 0.6.0.
xrdp is an open source RDP server. Versions through 0.10.5 have an out-of-bounds read vulnerability in the pre-authentication RDP message parsing logic. A remote, unauthenticated attacker can trigger this flaw by sending a specially crafted sequence of packets during the initial connection phase. This vulnerability results from insufficient validation of input buffer lengths before processing dynamic channel communication. Successful exploitation can lead to a denial-of-service (DoS) condition via a process crash or potential disclosure of sensitive information from the service's memory space. This issue has been fixed in version 0.10.6.
Stirling-PDF is a locally hosted web application that facilitates various operations on PDF files. In versions prior to 2.0.0, file upload endpoints render user-supplied filenames directly into HTML using unsafe methods like innerHTML without sanitization. An attacker can craft a file with a malicious filename containing JavaScript that executes in the uploading user's browser context, resulting in reflected XSS. The issue affects numerous upload endpoints across the application. The issue has been fixed in version 2.0.0.
xrdp is an open source RDP server. Versions through 0.10.5 allow an authenticated remote user to execute arbitrary commands on the server due to unsafe handling of the AlternateShell parameter in xrdp-sesman. When the AllowAlternateShell setting is enabled (which is the default when not explicitly configured), xrdp accepts a client-supplied AlternateShell value and executes it via /bin/sh -c during session initialization. This results in shell-interpreted execution of unsanitized, user-controlled input. This behavior effectively provides a scriptable remote command execution primitive over RDP within the security context of the authenticated user, occurring prior to normal window manager startup. This can bypass expected session initialization flows and operational assumptions that restrict execution to interactive desktop environments. This issue has been fixed in version 0.10.6.
Dolibarr is an enterprise resource planning (ERP) and customer relationship management (CRM) software package. In versions prior to 23.0.0 , the ODT to PDF conversion process in odf.php concatenates the MAIN_ODT_AS_PDF configuration constant directly into a shell command passed to exec() without sanitization. An authenticated administrator can inject arbitrary OS commands via this constant using command separators, achieving remote code execution as the web server user when any ODT template is generated. This issue has been fixed in version 23.0.0.
Anviz CX2 Lite and CX7 are vulnerable to unauthenticated POST requests that modify debug
settings (e.g., enabling SSH), allowing unauthorized state changes that
can facilitate later compromise.
Anviz CrossChex Standard
lacks source verification in the client/server channel, enabling TCP
packet injection by an attacker on the same network to alter or disrupt
application traffic.
Firebird is an open-source relational database management system. In versions prior to 5.0.4, 4.0.7 and 3.0.14, the external engine plugin loader concatenates a user-supplied engine name into a filesystem path without filtering path separators or .. components. An authenticated user with CREATE FUNCTION privileges can use a crafted ENGINE name to load an arbitrary shared library from anywhere on the filesystem via path traversal. The library's initialization code executes immediately during loading, before Firebird validates the module, achieving code execution as the server's OS account. This issue has been fixed in versions 5.0.4, 4.0.7 and 3.0.14.
WeGIA is a web manager for charitable institutions. In versions prior to 3.6.10, a Stored Cross-Site Scripting (XSS) vulnerability allows an authenticated user to inject malicious JavaScript via the "Nome" field in the "Informações Pacientes" page. The payload is stored and executed when the patient information is viewed. Version 3.6.10 fixes the issue.
Anviz CX2 Lite and CX7 are vulnerable to unverified update packages that can be uploaded. The
device unpacks and executes a script resulting in unauthenticated remote
code execution.
Anviz CX2 Lite is vulnerable to an authenticated command injection via a
filename parameter that enables arbitrary command execution (e.g.,
starting telnetd), resulting in root‑level access.
Anviz CX2 Lite and CX7 are vulnerable to unauthenticated firmware uploads. This causes crafted
archives to be accepted, enabling attackers to plant and execute code
and obtain a reverse shell.
Firebird is an open-source relational database management system. In versions prior to 5.0.4, 4.0.7 and 3.0.14, the sdl_desc() function does not validate the length of a decoded SDL descriptor from a slice packet. A zero-length descriptor is later used to calculate the number of slice items, causing a division by zero. An unauthenticated attacker can exploit this by sending a crafted slice packet to crash the server. This issue has been fixed in versions 5.0.4, 4.0.7 and 3.0.14.
Anviz CX7 Firmware is vulnerable to the most recently captured test photo that can be
retrieved without authentication, revealing sensitive operational
imagery.
Firebird is an open-source relational database management system. In versions prior to 5.0.4, 4.0.7 and 3.0.14, the xdr_status_vector() function does not handle the isc_arg_cstring type when decoding an op_response packet, causing a server crash when one is encountered in the status vector. An unauthenticated attacker can exploit this by sending a crafted op_response packet to the server. This issue has been fixed in versions 5.0.4, 4.0.7 and 3.0.14.
Anviz CX2 Lite and CX7 administrative sessions occur over HTTP, enabling
on‑path attackers to sniff credentials and session data, which can be
used to compromise the device.
xrdp is an open source RDP server. Versions through 0.10.5 contain an out-of-bounds read vulnerability during the RDP capability exchange phase. The issue occurs when memory is accessed before validating the remaining buffer length. A remote, unauthenticated attacker can trigger this vulnerability by sending a specially crafted Confirm Active PDU. Successful exploitation could lead to a denial of service (process crash) or potential disclosure of sensitive information from the process memory. This issue has been fixed in version 0.10.6.
Anviz CX7 Firmware is vulnerable to an unauthenticated POST to the device that captures
a photo with the front facing camera, exposing visual information about
the deployment environment.
Anviz CrossChex Standard is vulnerable when an attacker manipulates the TDS7 PreLogin to disable
encryption, causing database credentials to be sent in plaintext and
enabling unauthorized database access.
Anviz CX2 Lite and CX7 are vulnerable to unauthenticated access that discloses debug
configuration details (e.g., SSH/RTTY status), assisting attackers in
reconnaissance against the device.
xrdp is an open source RDP server. Versions through 0.10.5 contain a heap-based buffer overflow vulnerability in its logon processing. In environments where domain_user_separator is configured in xrdp.ini, an unauthenticated remote attacker can send a crafted, excessively long username and domain name to overflow the internal buffer. This can corrupt adjacent memory regions, potentially leading to a Denial of Service (DoS) or unexpected behavior. The domain_name_separator directive is commented out by default, systems are not affected by this vulnerability unless it is intentionally configured. This issue has been fixed in version 0.10.6.
xrdp is an open source RDP server. Versions through 0.10.5 contain a heap-based buffer overflow vulnerability in the NeutrinoRDP module. When proxying RDP sessions from xrdp to another server, the module fails to properly validate the size of reassembled fragmented virtual channel data against its allocated memory buffer. A malicious downstream RDP server (or an attacker capable of performing a Man-in-the-Middle attack) could exploit this flaw to cause memory corruption, potentially leading to a Denial of Service (DoS) or Remote Code Execution (RCE). The NeutrinoRDP module is not built by default. This vulnerability only affects environments where the module has been explicitly compiled and enabled. Users can verify if the module is built by checking for --enable-neutrinordp in the output of the xrdp -v command. This issue has been fixed in version 0.10.6.
Anviz CX7 Firmware isÂ
vulnerable because the application embeds reusable certificate/key
material, enabling decryption of MQTT traffic and potential interaction
with device messaging channels at scale.
xrdp is an open source RDP server. In versions through 0.10.5, the session execution component did not properly handle an error during the privilege drop process. This improper privilege management could allow an authenticated local attacker to escalate privileges to root and execute arbitrary code on the system. An additional exploit would be needed to facilitate this. This issue has been fixed in version 0.10.6.
xrdp is an open source RDP server. In versions through 0.10.5, xrdp does not implement verification for the Message Authentication Code (MAC) signature of encrypted RDP packets when using the "Classic RDP Security" layer. While the sender correctly generates signatures, the receiving logic lacks the necessary implementation to validate the 8-byte integrity signature, causing it to be silently ignored. An unauthenticated attacker with man-in-the-middle (MITM) capabilities can exploit this missing check to modify encrypted traffic in transit without detection. It does not affect connections where the TLS security layer is enforced. This issue has been fixed in version 0.10.6. If users are unable to immediately upgrade, they should configure xrdp.ini to enforce TLS security (security_layer=tls) to ensure end-to-end integrity.
Anviz CX7 Firmware is vulnerable to an authenticated CSV upload which allows path traversal
to overwrite arbitrary files (e.g., /etc/shadow), enabling unauthorized
SSH access when combined with debug‑setting changes
Improper neutralization of argument delimiters in the volume handling component in AWS EFS CSI Driver (aws-efs-csi-driver) before v3.0.1 allows remote authenticated users with PersistentVolume creation permissions to inject arbitrary mount options via comma injection.
To remediate this issue, users should upgrade to version v3.0.1
OpenViking prior to version 0.3.9Â contains an authentication bypass vulnerability in the VikingBot OpenAPI HTTP route surface where the authentication check fails open when the api_key configuration value is unset or empty. Remote attackers with network access to the exposed service can invoke privileged bot-control functionality without providing a valid X-API-Key header, including submitting attacker-controlled prompts, creating or using bot sessions, and accessing downstream tools, integrations, secrets, or data accessible to the bot.
Firebird is an open-source relational database management system. In versions prior to 5.0.4, 4.0.7 and 3.0.14, when deserializing a slice packet, the xdr_datum() function does not validate that a cstring length conforms to the slice descriptor bounds, allowing a cstring longer than the allocated buffer to overflow it. An unauthenticated attacker can exploit this by sending a crafted packet to the server, potentially causing a crash or other security impact. This issue has been fixed in versions 5.0.4, 4.0.7 and 3.0.14.
Firebird is an open-source relational database management system. In versions prior to 5.0.4, 4.0.7 and 3.0.14, when the server receives an op_crypt_key_callback packet without prior authentication, the port_server_crypt_callback handler is not initialized, resulting in a null pointer dereference and server crash. An unauthenticated attacker who knows only the server's IP and port can exploit this to crash the server. This issue has been fixed in versions 5.0.4, 4.0.7 and 3.0.14.
Firebird is an open-source relational database management system. In versions prior to 5.0.4, 4.0.7 and 3.0.14, the ClumpletReader::getClumpletSize() function can overflow the totalLength value when parsing a Wide type clumplet, causing an infinite loop. An authenticated user with INSERT privileges on any table can exploit this via a crafted Batch Parameter Block to cause a denial of service against the server. This issue has been fixed in versions 5.0.4, 4.0.7 and 3.0.14.
Firebird is an open-source relational database management system. In versions prior to 6.0.0, 5.0.4, 4.0.7 and 3.0.14, when processing an op_slice network packet, the server passes an unprepared structure containing a null pointer to the SDL_info() function, resulting in a null pointer dereference and server crash. An unauthenticated attacker can trigger this by sending a crafted packet to the server port. This issue has been fixed in versions 6.0.0, 5.0.4, 4.0.7 and 3.0.14.
Firebird is an open-source relational database management system. In versions prior to 5.0.4, 4.0.7 and 3.0.14, when processing CNCT_specific_data segments during authentication, the server assumes segments arrive in strictly ascending order. If segments arrive out of order, the Array class's grow() method computes a negative size value, causing a SIGSEGV crash. An unauthenticated attacker who knows only the server's IP and port can exploit this to crash the server. This issue has been fixed in versions 5.0.4, 4.0.7 and 3.0.14.
The Drag and Drop Multiple File Upload for Contact Form 7 plugin for WordPress is vulnerable to arbitrary file upload in versions up to, and including, 1.3.9.7. This is due to insufficient file type validation that occurs when custom blacklist types are configured, which replaces the default dangerous extension denylist instead of merging with it, and the wpcf7_antiscript_file_name() sanitization function being bypassed for filenames containing non-ASCII characters. This makes it possible for unauthenticated attackers to upload arbitrary files, such as PHP files, to the server, which can be leveraged to achieve remote code execution. The vulnerability was originally reported by Leonid Semenenko (lsemenenko) and partially patched in version 1.3.9.7. A bypass for the patch was separately discovered and reported by Nguyen Hung (Mitchell).
The Drag and Drop Multiple File Upload for Contact Form 7 plugin for WordPress is vulnerable to Path Traversal leading to Arbitrary File Read in versions up to and including 1.3.9.6. This is due to the plugin using client-supplied mfile[] POST values as the source of truth for email attachment selection without performing any server-side upload provenance check, path canonicalization, or directory containment boundary enforcement. In dnd_wpcf7_posted_data(), each user-submitted filename is directly appended to the plugin's upload URL without sanitization. In dnd_cf7_mail_components(), the URL is converted back to a filesystem path using str_replace() and only file_exists() is used as the acceptance check before attaching the file to the outgoing CF7 email. This makes it possible for unauthenticated attackers to read and exfiltrate arbitrary files readable by the web server process via path traversal sequences in the mfile[] parameter, with files being disclosed as email attachments. Note: This vulnerability is limited to the 'wp-content' folder due to the wpcf7_is_file_path_in_content_dir() function in the Contact Form 7 plugin.
Giskard is an open-source testing framework for AI models. In versions prior to 1.0.2b1, the ConformityCheck class rendered the rule parameter through Jinja2's default Template() constructor, silently interpreting template expressions at runtime. If check definitions are loaded from an untrusted source, a crafted rule string could achieve arbitrary code execution. Exploitation requires write access to a check definition and subsequent execution of the test suite. This issue has been fixed in giskard-checks version 1.0.2b1.
Giskard is an open-source testing framework for AI models. In versions prior to 1.0.2b1, the RegexMatching check passes a user-supplied regular expression pattern directly to Python's re.search() without any timeout or complexity guard. A crafted regex pattern can trigger catastrophic backtracking, causing the process to hang indefinitely. Exploitation requires write access to a check definition and subsequent execution of the test suite. This issue has been fixed in giskard-checks version 1.0.2b1.
Firebird is an open-source relational database management system. In versions FB3 of the client library placed incorrect data length values into XSQLDA fields when communicating with FB4 or higher servers, resulting in an information leak. This issue is fixed by upgrading to the FB4 client or higher.
ByteDance DeerFlow before commit 2176b2b contains a path traversal and arbitrary file write vulnerability in bootstrap-mode custom-agent creation where the agent name validation is bypassed. Attackers can supply traversal-style values or absolute paths as the agent name to influence directory creation and write files outside the intended custom-agent directory, potentially achieving arbitrary file write on the system subject to filesystem permissions.
OpenHarness before commit bd4df81 contains a server-side request forgery vulnerability in the web_fetch and web_search tools that allows attackers to access private and localhost HTTP services by manipulating tool parameters without proper validation of target addresses. Attackers can influence an agent session to invoke these tools against loopback, RFC1918, link-local, or other non-public addresses to read response bodies from local development services, cloud metadata endpoints, admin panels, or other private HTTP services reachable from the victim host.
OpenHarness before commit bd4df81 contains a permission bypass vulnerability that allows attackers to read sensitive files by exploiting incomplete path normalization in the permission checker. Attackers can invoke the built-in grep and glob tools with sensitive root directories that are not properly evaluated against configured path rules, allowing disclosure of sensitive local file content, key material, configuration files, or directory contents despite configured path restrictions.
The WP Customer Area plugin for WordPress is vulnerable to arbitrary file read and deletion due to insufficient file path validation in the 'ajax_attach_file' function in all versions up to, and including, 8.3.4. This makes it possible for authenticated attackers with a role that an administrator grants access to (e.g., Subscriber) to to read the contents of arbitrary files on the server, which can contain sensitive information, or delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php).
Software installed and run as a non-privileged user may conduct improper GPU system calls to gain write permission to read-only wrapped user-mode memory and files.
This is caused by improper handling of GPU memory reservation protections.
A vulnerability was determined in prasathmani TinyFileManager up to 2.6. Affected by this vulnerability is an unknown functionality of the file /filemanager.php?p= ajax=true&type=upload of the component File Upload Handler. This manipulation of the argument uploadurl causes server-side request forgery. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.
An attacker with network access to the PLC is able to brute force discover passwords to gain unauthorized access to systems and services. The limited password complexity and no password input limiters makes brute force password enumeration possible.