In the Linux kernel, the following vulnerability has been resolved:
PCI: imx6: Fix suspend/resume support on i.MX6QDL
The suspend/resume functionality is currently broken on the i.MX6QDL
platform, as documented in the NXP errata (ERR005723):
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
This patch addresses the issue by sharing most of the suspend/resume
sequences used by other i.MX devices, while avoiding modifications to
critical registers that disrupt the PCIe functionality. It targets the
same problem as the following downstream commit:
https://github.com/nxp-imx/linux-imx/commit/4e92355e1f79d225ea842511fcfd42b343b32995
Unlike the downstream commit, this patch also resets the connected PCIe
device if possible. Without this reset, certain drivers, such as ath10k
or iwlwifi, will crash on resume. The device reset is also done by the
driver on other i.MX platforms, making this patch consistent with
existing practices.
Upon resuming, the kernel will hang and display an error. Here's an
example of the error encountered with the ath10k driver:
ath10k_pci 0000:01:00.0: Unable to change power state from D3hot to D0, device inaccessible
Unhandled fault: imprecise external abort (0x1406) at 0x0106f944
Without this patch, suspend/resume will fail on i.MX6QDL devices if a
PCIe device is connected.
[kwilczynski: commit log, added tag for stable releases]
In the Linux kernel, the following vulnerability has been resolved:
scsi: megaraid_sas: Fix for a potential deadlock
This fixes a 'possible circular locking dependency detected' warning
CPU0 CPU1
---- ----
lock(&instance->reset_mutex);
lock(&shost->scan_mutex);
lock(&instance->reset_mutex);
lock(&shost->scan_mutex);
Fix this by temporarily releasing the reset_mutex.
In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: hda-dai: Do not release the link DMA on STOP
The linkDMA should not be released on stop trigger since a stream re-start
might happen without closing of the stream. This leaves a short time for
other streams to 'steal' the linkDMA since it has been released.
This issue is not easy to reproduce under normal conditions as usually
after stop the stream is closed, or the same stream is restarted, but if
another stream got in between the stop and start, like this:
aplay -Dhw:0,3 -c2 -r48000 -fS32_LE /dev/zero -d 120
CTRL+z
aplay -Dhw:0,0 -c2 -r48000 -fS32_LE /dev/zero -d 120
then the link DMA channels will be mixed up, resulting firmware error or
crash.
In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfs
The driver, through the SAS transport, exposes a sysfs interface to
enable/disable PHYs in a controller/expander setup. When multiple PHYs
are disabled and enabled in rapid succession, the persistent and current
config pages related to SAS IO unit/SAS Expander pages could get
corrupted.
Use separate memory for each config request.
In the Linux kernel, the following vulnerability has been resolved:
ALSA: memalloc: prefer dma_mapping_error() over explicit address checking
With CONFIG_DMA_API_DEBUG enabled, the following warning is observed:
DMA-API: snd_hda_intel 0000:03:00.1: device driver failed to check map error[device address=0x00000000ffff0000] [size=20480 bytes] [mapped as single]
WARNING: CPU: 28 PID: 2255 at kernel/dma/debug.c:1036 check_unmap+0x1408/0x2430
CPU: 28 UID: 42 PID: 2255 Comm: wireplumber Tainted: G W L 6.12.0-10-133577cad6bf48e5a7848c4338124081393bfe8a+ #759
debug_dma_unmap_page+0xe9/0xf0
snd_dma_wc_free+0x85/0x130 [snd_pcm]
snd_pcm_lib_free_pages+0x1e3/0x440 [snd_pcm]
snd_pcm_common_ioctl+0x1c9a/0x2960 [snd_pcm]
snd_pcm_ioctl+0x6a/0xc0 [snd_pcm]
...
Check for returned DMA addresses using specialized dma_mapping_error()
helper which is generally recommended for this purpose by
Documentation/core-api/dma-api.rst.
In the Linux kernel, the following vulnerability has been resolved:
phy: rockchip: samsung-hdptx: Set drvdata before enabling runtime PM
In some cases, rk_hdptx_phy_runtime_resume() may be invoked before
platform_set_drvdata() is executed in ->probe(), leading to a NULL
pointer dereference when using the return of dev_get_drvdata().
Ensure platform_set_drvdata() is called before devm_pm_runtime_enable().
In the Linux kernel, the following vulnerability has been resolved:
drm/modes: Avoid divide by zero harder in drm_mode_vrefresh()
drm_mode_vrefresh() is trying to avoid divide by zero
by checking whether htotal or vtotal are zero. But we may
still end up with a div-by-zero of vtotal*htotal*...
In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: util: Avoid accessing a ringbuffer not initialized yet
If the KVP (or VSS) daemon starts before the VMBus channel's ringbuffer is
fully initialized, we can hit the panic below:
hv_utils: Registering HyperV Utility Driver
hv_vmbus: registering driver hv_utils
...
BUG: kernel NULL pointer dereference, address: 0000000000000000
CPU: 44 UID: 0 PID: 2552 Comm: hv_kvp_daemon Tainted: G E 6.11.0-rc3+ #1
RIP: 0010:hv_pkt_iter_first+0x12/0xd0
Call Trace:
...
vmbus_recvpacket
hv_kvp_onchannelcallback
vmbus_on_event
tasklet_action_common
tasklet_action
handle_softirqs
irq_exit_rcu
sysvec_hyperv_stimer0
</IRQ>
<TASK>
asm_sysvec_hyperv_stimer0
...
kvp_register_done
hvt_op_read
vfs_read
ksys_read
__x64_sys_read
This can happen because the KVP/VSS channel callback can be invoked
even before the channel is fully opened:
1) as soon as hv_kvp_init() -> hvutil_transport_init() creates
/dev/vmbus/hv_kvp, the kvp daemon can open the device file immediately and
register itself to the driver by writing a message KVP_OP_REGISTER1 to the
file (which is handled by kvp_on_msg() ->kvp_handle_handshake()) and
reading the file for the driver's response, which is handled by
hvt_op_read(), which calls hvt->on_read(), i.e. kvp_register_done().
2) the problem with kvp_register_done() is that it can cause the
channel callback to be called even before the channel is fully opened,
and when the channel callback is starting to run, util_probe()->
vmbus_open() may have not initialized the ringbuffer yet, so the
callback can hit the panic of NULL pointer dereference.
To reproduce the panic consistently, we can add a "ssleep(10)" for KVP in
__vmbus_open(), just before the first hv_ringbuffer_init(), and then we
unload and reload the driver hv_utils, and run the daemon manually within
the 10 seconds.
Fix the panic by reordering the steps in util_probe() so the char dev
entry used by the KVP or VSS daemon is not created until after
vmbus_open() has completed. This reordering prevents the race condition
from happening.
In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Play nice with protected guests in complete_hypercall_exit()
Use is_64_bit_hypercall() instead of is_64_bit_mode() to detect a 64-bit
hypercall when completing said hypercall. For guests with protected state,
e.g. SEV-ES and SEV-SNP, KVM must assume the hypercall was made in 64-bit
mode as the vCPU state needed to detect 64-bit mode is unavailable.
Hacking the sev_smoke_test selftest to generate a KVM_HC_MAP_GPA_RANGE
hypercall via VMGEXIT trips the WARN:
------------[ cut here ]------------
WARNING: CPU: 273 PID: 326626 at arch/x86/kvm/x86.h:180 complete_hypercall_exit+0x44/0xe0 [kvm]
Modules linked in: kvm_amd kvm ... [last unloaded: kvm]
CPU: 273 UID: 0 PID: 326626 Comm: sev_smoke_test Not tainted 6.12.0-smp--392e932fa0f3-feat #470
Hardware name: Google Astoria/astoria, BIOS 0.20240617.0-0 06/17/2024
RIP: 0010:complete_hypercall_exit+0x44/0xe0 [kvm]
Call Trace:
<TASK>
kvm_arch_vcpu_ioctl_run+0x2400/0x2720 [kvm]
kvm_vcpu_ioctl+0x54f/0x630 [kvm]
__se_sys_ioctl+0x6b/0xc0
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
---[ end trace 0000000000000000 ]---
In the Linux kernel, the following vulnerability has been resolved:
block: Prevent potential deadlocks in zone write plug error recovery
Zone write plugging for handling writes to zones of a zoned block
device always execute a zone report whenever a write BIO to a zone
fails. The intent of this is to ensure that the tracking of a zone write
pointer is always correct to ensure that the alignment to a zone write
pointer of write BIOs can be checked on submission and that we can
always correctly emulate zone append operations using regular write
BIOs.
However, this error recovery scheme introduces a potential deadlock if a
device queue freeze is initiated while BIOs are still plugged in a zone
write plug and one of these write operation fails. In such case, the
disk zone write plug error recovery work is scheduled and executes a
report zone. This in turn can result in a request allocation in the
underlying driver to issue the report zones command to the device. But
with the device queue freeze already started, this allocation will
block, preventing the report zone execution and the continuation of the
processing of the plugged BIOs. As plugged BIOs hold a queue usage
reference, the queue freeze itself will never complete, resulting in a
deadlock.
Avoid this problem by completely removing from the zone write plugging
code the use of report zones operations after a failed write operation,
instead relying on the device user to either execute a report zones,
reset the zone, finish the zone, or give up writing to the device (which
is a fairly common pattern for file systems which degrade to read-only
after write failures). This is not an unreasonnable requirement as all
well-behaved applications, FSes and device mapper already use report
zones to recover from write errors whenever possible by comparing the
current position of a zone write pointer with what their assumption
about the position is.
The changes to remove the automatic error recovery are as follows:
- Completely remove the error recovery work and its associated
resources (zone write plug list head, disk error list, and disk
zone_wplugs_work work struct). This also removes the functions
disk_zone_wplug_set_error() and disk_zone_wplug_clear_error().
- Change the BLK_ZONE_WPLUG_ERROR zone write plug flag into
BLK_ZONE_WPLUG_NEED_WP_UPDATE. This new flag is set for a zone write
plug whenever a write opration targetting the zone of the zone write
plug fails. This flag indicates that the zone write pointer offset is
not reliable and that it must be updated when the next report zone,
reset zone, finish zone or disk revalidation is executed.
- Modify blk_zone_write_plug_bio_endio() to set the
BLK_ZONE_WPLUG_NEED_WP_UPDATE flag for the target zone of a failed
write BIO.
- Modify the function disk_zone_wplug_set_wp_offset() to clear this
new flag, thus implementing recovery of a correct write pointer
offset with the reset (all) zone and finish zone operations.
- Modify blkdev_report_zones() to always use the disk_report_zones_cb()
callback so that disk_zone_wplug_sync_wp_offset() can be called for
any zone marked with the BLK_ZONE_WPLUG_NEED_WP_UPDATE flag.
This implements recovery of a correct write pointer offset for zone
write plugs marked with BLK_ZONE_WPLUG_NEED_WP_UPDATE and within
the range of the report zones operation executed by the user.
- Modify blk_revalidate_seq_zone() to call
disk_zone_wplug_sync_wp_offset() for all sequential write required
zones when a zoned block device is revalidated, thus always resolving
any inconsistency between the write pointer offset of zone write
plugs and the actual write pointer position of sequential zones.
In the Linux kernel, the following vulnerability has been resolved:
xfs: unlock inodes when erroring out of xfs_trans_alloc_dir
Debugging a filesystem patch with generic/475 caused the system to hang
after observing the following sequences in dmesg:
XFS (dm-0): metadata I/O error in "xfs_imap_to_bp+0x61/0xe0 [xfs]" at daddr 0x491520 len 32 error 5
XFS (dm-0): metadata I/O error in "xfs_btree_read_buf_block+0xba/0x160 [xfs]" at daddr 0x3445608 len 8 error 5
XFS (dm-0): metadata I/O error in "xfs_imap_to_bp+0x61/0xe0 [xfs]" at daddr 0x138e1c0 len 32 error 5
XFS (dm-0): log I/O error -5
XFS (dm-0): Metadata I/O Error (0x1) detected at xfs_trans_read_buf_map+0x1ea/0x4b0 [xfs] (fs/xfs/xfs_trans_buf.c:311). Shutting down filesystem.
XFS (dm-0): Please unmount the filesystem and rectify the problem(s)
XFS (dm-0): Internal error dqp->q_ino.reserved < dqp->q_ino.count at line 869 of file fs/xfs/xfs_trans_dquot.c. Caller xfs_trans_dqresv+0x236/0x440 [xfs]
XFS (dm-0): Corruption detected. Unmount and run xfs_repair
XFS (dm-0): Unmounting Filesystem be6bcbcc-9921-4deb-8d16-7cc94e335fa7
The system is stuck in unmount trying to lock a couple of inodes so that
they can be purged. The dquot corruption notice above is a clue to what
happened -- a link() call tried to set up a transaction to link a child
into a directory. Quota reservation for the transaction failed after IO
errors shut down the filesystem, but then we forgot to unlock the inodes
on our way out. Fix that.
In the Linux kernel, the following vulnerability has been resolved:
net: renesas: rswitch: avoid use-after-put for a device tree node
The device tree node saved in the rswitch_device structure is used at
several driver locations. So passing this node to of_node_put() after
the first use is wrong.
Move of_node_put() for this node to exit paths.
In the Linux kernel, the following vulnerability has been resolved:
netfilter: IDLETIMER: Fix for possible ABBA deadlock
Deletion of the last rule referencing a given idletimer may happen at
the same time as a read of its file in sysfs:
| ======================================================
| WARNING: possible circular locking dependency detected
| 6.12.0-rc7-01692-g5e9a28f41134-dirty #594 Not tainted
| ------------------------------------------------------
| iptables/3303 is trying to acquire lock:
| ffff8881057e04b8 (kn->active#48){++++}-{0:0}, at: __kernfs_remove+0x20
|
| but task is already holding lock:
| ffffffffa0249068 (list_mutex){+.+.}-{3:3}, at: idletimer_tg_destroy_v]
|
| which lock already depends on the new lock.
A simple reproducer is:
| #!/bin/bash
|
| while true; do
| iptables -A INPUT -i foo -j IDLETIMER --timeout 10 --label "testme"
| iptables -D INPUT -i foo -j IDLETIMER --timeout 10 --label "testme"
| done &
| while true; do
| cat /sys/class/xt_idletimer/timers/testme >/dev/null
| done
Avoid this by freeing list_mutex right after deleting the element from
the list, then continuing with the teardown.
In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Fix general protection fault in ivpu_bo_list()
Check if ctx is not NULL before accessing its fields.
In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Fix WARN in ivpu_ipc_send_receive_internal()
Move pm_runtime_set_active() to ivpu_pm_init() so when
ivpu_ipc_send_receive_internal() is executed before ivpu_pm_enable()
it already has correct runtime state, even if last resume was
not successful.
In the Linux kernel, the following vulnerability has been resolved:
nilfs2: prevent use of deleted inode
syzbot reported a WARNING in nilfs_rmdir. [1]
Because the inode bitmap is corrupted, an inode with an inode number that
should exist as a ".nilfs" file was reassigned by nilfs_mkdir for "file0",
causing an inode duplication during execution. And this causes an
underflow of i_nlink in rmdir operations.
The inode is used twice by the same task to unmount and remove directories
".nilfs" and "file0", it trigger warning in nilfs_rmdir.
Avoid to this issue, check i_nlink in nilfs_iget(), if it is 0, it means
that this inode has been deleted, and iput is executed to reclaim it.
[1]
WARNING: CPU: 1 PID: 5824 at fs/inode.c:407 drop_nlink+0xc4/0x110 fs/inode.c:407
...
Call Trace:
<TASK>
nilfs_rmdir+0x1b0/0x250 fs/nilfs2/namei.c:342
vfs_rmdir+0x3a3/0x510 fs/namei.c:4394
do_rmdir+0x3b5/0x580 fs/namei.c:4453
__do_sys_rmdir fs/namei.c:4472 [inline]
__se_sys_rmdir fs/namei.c:4470 [inline]
__x64_sys_rmdir+0x47/0x50 fs/namei.c:4470
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
In the Linux kernel, the following vulnerability has been resolved:
ceph: give up on paths longer than PATH_MAX
If the full path to be built by ceph_mdsc_build_path() happens to be
longer than PATH_MAX, then this function will enter an endless (retry)
loop, effectively blocking the whole task. Most of the machine
becomes unusable, making this a very simple and effective DoS
vulnerability.
I cannot imagine why this retry was ever implemented, but it seems
rather useless and harmful to me. Let's remove it and fail with
ENAMETOOLONG instead.
In the Linux kernel, the following vulnerability has been resolved:
regulator: axp20x: AXP717: set ramp_delay
AXP717 datasheet says that regulator ramp delay is 15.625 us/step,
which is 10mV in our case.
Add a AXP_DESC_RANGES_DELAY macro and update AXP_DESC_RANGES macro to
expand to AXP_DESC_RANGES_DELAY with ramp_delay = 0
For DCDC4, steps is 100mv
Add a AXP_DESC_DELAY macro and update AXP_DESC macro to
expand to AXP_DESC_DELAY with ramp_delay = 0
This patch fix crashes when using CPU DVFS.
In the Linux kernel, the following vulnerability has been resolved:
ipvs: fix UB due to uninitialized stack access in ip_vs_protocol_init()
Under certain kernel configurations when building with Clang/LLVM, the
compiler does not generate a return or jump as the terminator
instruction for ip_vs_protocol_init(), triggering the following objtool
warning during build time:
vmlinux.o: warning: objtool: ip_vs_protocol_init() falls through to next function __initstub__kmod_ip_vs_rr__935_123_ip_vs_rr_init6()
At runtime, this either causes an oops when trying to load the ipvs
module or a boot-time panic if ipvs is built-in. This same issue has
been reported by the Intel kernel test robot previously.
Digging deeper into both LLVM and the kernel code reveals this to be a
undefined behavior problem. ip_vs_protocol_init() uses a on-stack buffer
of 64 chars to store the registered protocol names and leaves it
uninitialized after definition. The function calls strnlen() when
concatenating protocol names into the buffer. With CONFIG_FORTIFY_SOURCE
strnlen() performs an extra step to check whether the last byte of the
input char buffer is a null character (commit 3009f891bb9f ("fortify:
Allow strlen() and strnlen() to pass compile-time known lengths")).
This, together with possibly other configurations, cause the following
IR to be generated:
define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #5 section ".init.text" align 16 !kcfi_type !29 {
%1 = alloca [64 x i8], align 16
...
14: ; preds = %11
%15 = getelementptr inbounds i8, ptr %1, i64 63
%16 = load i8, ptr %15, align 1
%17 = tail call i1 @llvm.is.constant.i8(i8 %16)
%18 = icmp eq i8 %16, 0
%19 = select i1 %17, i1 %18, i1 false
br i1 %19, label %20, label %23
20: ; preds = %14
%21 = call i64 @strlen(ptr noundef nonnull dereferenceable(1) %1) #23
...
23: ; preds = %14, %11, %20
%24 = call i64 @strnlen(ptr noundef nonnull dereferenceable(1) %1, i64 noundef 64) #24
...
}
The above code calculates the address of the last char in the buffer
(value %15) and then loads from it (value %16). Because the buffer is
never initialized, the LLVM GVN pass marks value %16 as undefined:
%13 = getelementptr inbounds i8, ptr %1, i64 63
br i1 undef, label %14, label %17
This gives later passes (SCCP, in particular) more DCE opportunities by
propagating the undef value further, and eventually removes everything
after the load on the uninitialized stack location:
define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #0 section ".init.text" align 16 !kcfi_type !11 {
%1 = alloca [64 x i8], align 16
...
12: ; preds = %11
%13 = getelementptr inbounds i8, ptr %1, i64 63
unreachable
}
In this way, the generated native code will just fall through to the
next function, as LLVM does not generate any code for the unreachable IR
instruction and leaves the function without a terminator.
Zero the on-stack buffer to avoid this possible UB.
In the Linux kernel, the following vulnerability has been resolved:
sched/fair: Fix NEXT_BUDDY
Adam reports that enabling NEXT_BUDDY insta triggers a WARN in
pick_next_entity().
Moving clear_buddies() up before the delayed dequeue bits ensures
no ->next buddy becomes delayed. Further ensure no new ->next buddy
ever starts as delayed.
In the Linux kernel, the following vulnerability has been resolved:
net/smc: check iparea_offset and ipv6_prefixes_cnt when receiving proposal msg
When receiving proposal msg in server, the field iparea_offset
and the field ipv6_prefixes_cnt in proposal msg are from the
remote client and can not be fully trusted. Especially the
field iparea_offset, once exceed the max value, there has the
chance to access wrong address, and crash may happen.
This patch checks iparea_offset and ipv6_prefixes_cnt before using them.
In the Linux kernel, the following vulnerability has been resolved:
nvme-rdma: unquiesce admin_q before destroy it
Kernel will hang on destroy admin_q while we create ctrl failed, such
as following calltrace:
PID: 23644 TASK: ff2d52b40f439fc0 CPU: 2 COMMAND: "nvme"
#0 [ff61d23de260fb78] __schedule at ffffffff8323bc15
#1 [ff61d23de260fc08] schedule at ffffffff8323c014
#2 [ff61d23de260fc28] blk_mq_freeze_queue_wait at ffffffff82a3dba1
#3 [ff61d23de260fc78] blk_freeze_queue at ffffffff82a4113a
#4 [ff61d23de260fc90] blk_cleanup_queue at ffffffff82a33006
#5 [ff61d23de260fcb0] nvme_rdma_destroy_admin_queue at ffffffffc12686ce
#6 [ff61d23de260fcc8] nvme_rdma_setup_ctrl at ffffffffc1268ced
#7 [ff61d23de260fd28] nvme_rdma_create_ctrl at ffffffffc126919b
#8 [ff61d23de260fd68] nvmf_dev_write at ffffffffc024f362
#9 [ff61d23de260fe38] vfs_write at ffffffff827d5f25
RIP: 00007fda7891d574 RSP: 00007ffe2ef06958 RFLAGS: 00000202
RAX: ffffffffffffffda RBX: 000055e8122a4d90 RCX: 00007fda7891d574
RDX: 000000000000012b RSI: 000055e8122a4d90 RDI: 0000000000000004
RBP: 00007ffe2ef079c0 R8: 000000000000012b R9: 000055e8122a4d90
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000004
R13: 000055e8122923c0 R14: 000000000000012b R15: 00007fda78a54500
ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b
This due to we have quiesced admi_q before cancel requests, but forgot
to unquiesce before destroy it, as a result we fail to drain the
pending requests, and hang on blk_mq_freeze_queue_wait() forever. Here
try to reuse nvme_rdma_teardown_admin_queue() to fix this issue and
simplify the code.
In the Linux kernel, the following vulnerability has been resolved:
net/smc: check v2_ext_offset/eid_cnt/ism_gid_cnt when receiving proposal msg
When receiving proposal msg in server, the fields v2_ext_offset/
eid_cnt/ism_gid_cnt in proposal msg are from the remote client
and can not be fully trusted. Especially the field v2_ext_offset,
once exceed the max value, there has the chance to access wrong
address, and crash may happen.
This patch checks the fields v2_ext_offset/eid_cnt/ism_gid_cnt
before using them.
In the Linux kernel, the following vulnerability has been resolved:
bcache: revert replacing IS_ERR_OR_NULL with IS_ERR again
Commit 028ddcac477b ("bcache: Remove unnecessary NULL point check in
node allocations") leads a NULL pointer deference in cache_set_flush().
1721 if (!IS_ERR_OR_NULL(c->root))
1722 list_add(&c->root->list, &c->btree_cache);
>From the above code in cache_set_flush(), if previous registration code
fails before allocating c->root, it is possible c->root is NULL as what
it is initialized. __bch_btree_node_alloc() never returns NULL but
c->root is possible to be NULL at above line 1721.
This patch replaces IS_ERR() by IS_ERR_OR_NULL() to fix this.
In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: check return value of ieee80211_probereq_get() for RNR
The return value of ieee80211_probereq_get() might be NULL, so check it
before using to avoid NULL pointer access.
Addresses-Coverity-ID: 1529805 ("Dereference null return value")
In the Linux kernel, the following vulnerability has been resolved:
dlm: fix possible lkb_resource null dereference
This patch fixes a possible null pointer dereference when this function is
called from request_lock() as lkb->lkb_resource is not assigned yet,
only after validate_lock_args() by calling attach_lkb(). Another issue
is that a resource name could be a non printable bytearray and we cannot
assume to be ASCII coded.
The log functionality is probably never being hit when DLM is used in
normal way and no debug logging is enabled. The null pointer dereference
can only occur on a new created lkb that does not have the resource
assigned yet, it probably never hits the null pointer dereference but we
should be sure that other changes might not change this behaviour and we
actually can hit the mentioned null pointer dereference.
In this patch we just drop the printout of the resource name, the lkb id
is enough to make a possible connection to a resource name if this
exists.
In the Linux kernel, the following vulnerability has been resolved:
net/smc: check smcd_v2_ext_offset when receiving proposal msg
When receiving proposal msg in server, the field smcd_v2_ext_offset in
proposal msg is from the remote client and can not be fully trusted.
Once the value of smcd_v2_ext_offset exceed the max value, there has
the chance to access wrong address, and crash may happen.
This patch checks the value of smcd_v2_ext_offset before using it.
In the Linux kernel, the following vulnerability has been resolved:
dma-debug: fix a possible deadlock on radix_lock
radix_lock() shouldn't be held while holding dma_hash_entry[idx].lock
otherwise, there's a possible deadlock scenario when
dma debug API is called holding rq_lock():
CPU0 CPU1 CPU2
dma_free_attrs()
check_unmap() add_dma_entry() __schedule() //out
(A) rq_lock()
get_hash_bucket()
(A) dma_entry_hash
check_sync()
(A) radix_lock() (W) dma_entry_hash
dma_entry_free()
(W) radix_lock()
// CPU2's one
(W) rq_lock()
CPU1 situation can happen when it extending radix tree and
it tries to wake up kswapd via wake_all_kswapd().
CPU2 situation can happen while perf_event_task_sched_out()
(i.e. dma sync operation is called while deleting perf_event using
etm and etr tmc which are Arm Coresight hwtracing driver backends).
To remove this possible situation, call dma_entry_free() after
put_hash_bucket() in check_unmap().
In the Linux kernel, the following vulnerability has been resolved:
pinmux: Use sequential access to access desc->pinmux data
When two client of the same gpio call pinctrl_select_state() for the
same functionality, we are seeing NULL pointer issue while accessing
desc->mux_owner.
Let's say two processes A, B executing in pin_request() for the same pin
and process A updates the desc->mux_usecount but not yet updated the
desc->mux_owner while process B see the desc->mux_usecount which got
updated by A path and further executes strcmp and while accessing
desc->mux_owner it crashes with NULL pointer.
Serialize the access to mux related setting with a mutex lock.
cpu0 (process A) cpu1(process B)
pinctrl_select_state() { pinctrl_select_state() {
pin_request() { pin_request() {
...
....
} else {
desc->mux_usecount++;
desc->mux_usecount && strcmp(desc->mux_owner, owner)) {
if (desc->mux_usecount > 1)
return 0;
desc->mux_owner = owner;
} }
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: don't access invalid sched
Since 2320c9e6a768 ("drm/sched: memset() 'job' in drm_sched_job_init()")
accessing job->base.sched can produce unexpected results as the initialisation
of (*job)->base.sched done in amdgpu_job_alloc is overwritten by the
memset.
This commit fixes an issue when a CS would fail validation and would
be rejected after job->num_ibs is incremented. In this case,
amdgpu_ib_free(ring->adev, ...) will be called, which would crash the
machine because the ring value is bogus.
To fix this, pass a NULL pointer to amdgpu_ib_free(): we can do this
because the device is actually not used in this function.
The next commit will remove the ring argument completely.
(cherry picked from commit 2ae520cb12831d264ceb97c61f72c59d33c0dbd7)
In the Linux kernel, the following vulnerability has been resolved:
i3c: mipi-i3c-hci: Mask ring interrupts before ring stop request
Bus cleanup path in DMA mode may trigger a RING_OP_STAT interrupt when
the ring is being stopped. Depending on timing between ring stop request
completion, interrupt handler removal and code execution this may lead
to a NULL pointer dereference in hci_dma_irq_handler() if it gets to run
after the io_data pointer is set to NULL in hci_dma_cleanup().
Prevent this my masking the ring interrupts before ring stop request.
In the Linux kernel, the following vulnerability has been resolved:
i3c: Use i3cdev->desc->info instead of calling i3c_device_get_info() to avoid deadlock
A deadlock may happen since the i3c_master_register() acquires
&i3cbus->lock twice. See the log below.
Use i3cdev->desc->info instead of calling i3c_device_info() to
avoid acquiring the lock twice.
v2:
- Modified the title and commit message
============================================
WARNING: possible recursive locking detected
6.11.0-mainline
--------------------------------------------
init/1 is trying to acquire lock:
f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_bus_normaluse_lock
but task is already holding lock:
f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&i3cbus->lock);
lock(&i3cbus->lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by init/1:
#0: fcffff809b6798f8 (&dev->mutex){....}-{3:3}, at: __driver_attach
#1: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register
stack backtrace:
CPU: 6 UID: 0 PID: 1 Comm: init
Call trace:
dump_backtrace+0xfc/0x17c
show_stack+0x18/0x28
dump_stack_lvl+0x40/0xc0
dump_stack+0x18/0x24
print_deadlock_bug+0x388/0x390
__lock_acquire+0x18bc/0x32ec
lock_acquire+0x134/0x2b0
down_read+0x50/0x19c
i3c_bus_normaluse_lock+0x14/0x24
i3c_device_get_info+0x24/0x58
i3c_device_uevent+0x34/0xa4
dev_uevent+0x310/0x384
kobject_uevent_env+0x244/0x414
kobject_uevent+0x14/0x20
device_add+0x278/0x460
device_register+0x20/0x34
i3c_master_register_new_i3c_devs+0x78/0x154
i3c_master_register+0x6a0/0x6d4
mtk_i3c_master_probe+0x3b8/0x4d8
platform_probe+0xa0/0xe0
really_probe+0x114/0x454
__driver_probe_device+0xa0/0x15c
driver_probe_device+0x3c/0x1ac
__driver_attach+0xc4/0x1f0
bus_for_each_dev+0x104/0x160
driver_attach+0x24/0x34
bus_add_driver+0x14c/0x294
driver_register+0x68/0x104
__platform_driver_register+0x20/0x30
init_module+0x20/0xfe4
do_one_initcall+0x184/0x464
do_init_module+0x58/0x1ec
load_module+0xefc/0x10c8
__arm64_sys_finit_module+0x238/0x33c
invoke_syscall+0x58/0x10c
el0_svc_common+0xa8/0xdc
do_el0_svc+0x1c/0x28
el0_svc+0x50/0xac
el0t_64_sync_handler+0x70/0xbc
el0t_64_sync+0x1a8/0x1ac
In the Linux kernel, the following vulnerability has been resolved:
sched: fix warning in sched_setaffinity
Commit 8f9ea86fdf99b added some logic to sched_setaffinity that included
a WARN when a per-task affinity assignment races with a cpuset update.
Specifically, we can have a race where a cpuset update results in the
task affinity no longer being a subset of the cpuset. That's fine; we
have a fallback to instead use the cpuset mask. However, we have a WARN
set up that will trigger if the cpuset mask has no overlap at all with
the requested task affinity. This shouldn't be a warning condition; its
trivial to create this condition.
Reproduced the warning by the following setup:
- $PID inside a cpuset cgroup
- another thread repeatedly switching the cpuset cpus from 1-2 to just 1
- another thread repeatedly setting the $PID affinity (via taskset) to 2
The Perfect Portal Widgets plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'perfect_portal_intake_form' shortcode in all versions up to, and including, 3.0.3 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The Dominion – Domain Checker for WPBakery plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'dominion_shortcodes_domain_search_6' shortcode in all versions up to, and including, 2.3.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The TCBD Auto Refresher plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'tcbd_auto_refresh' shortcode in all versions up to, and including, 2.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The Rental and Booking Manager for Bike, Car, Dress, Resort with WooCommerce Integration – WpRently | WordPress plugin plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘active_tab’ parameter in all versions up to, and including, 2.2.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The Push Notification for Post and BuddyPress plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'pushnotificationid' parameter in all versions up to, and including, 2.07 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.
The Unlimited Theme Addon For Elementor and WooCommerce plugin for WordPress is vulnerable to Information Exposure in all versions up to, and including, 1.2.2 via the 'uta-template' shortcode due to insufficient restrictions on which posts can be included. This makes it possible for authenticated attackers, with Contributor-level access and above, to extract data from private or draft posts created by Elementor that they should not have access to.
The RRAddons for Elementor plugin for WordPress is vulnerable to Information Exposure in all versions up to, and including, 1.1.0 via the Popup block due to insufficient restrictions on which posts can be included. This makes it possible for authenticated attackers, with Contributor-level access and above, to extract data from private or draft posts that they should not have access to.
The Accordion Slider Lite plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'accordion_slider' shortcode in all versions up to, and including, 1.5.1 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The Grid Accordion Lite plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'grid_accordion' shortcode in all versions up to, and including, 1.5.1 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The WP SPID Italia plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's shortcode in all versions up to, and including, 2.9 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The GatorMail SmartForms plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'gatormailsmartform' shortcode in all versions up to, and including, 1.1.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
Long hostnames in URLs could be leveraged to obscure the actual host of the website or spoof the website address. This vulnerability was fixed in Firefox for iOS 134.
Opening Javascript links in a new tab via long-press in the Firefox iOS client could result in a malicious script spoofing the URL of the new tab. This vulnerability was fixed in Firefox for iOS 134.