AIPHONE IXG SYSTEM IXG-2C7 firmware Ver.2.03 and earlier and IXG-2C7-L firmware Ver.2.03 and earlier contain an issue with insufficiently protected credentials, which may allow a network-adjacent authenticated attacker to perform unintended operations.
Use of hard-coded cryptographic key issue exists in AIPHONE IX SYSTEM, IXG SYSTEM, and System Support Software. A network-adjacent unauthenticated attacker may log in to SFTP service and obtain and/or manipulate unauthorized files.
Insufficiently protected credentials issue exists in AIPHONE IX SYSTEM and IXG SYSTEM. A network-adjacent unauthenticated attacker may obtain sensitive information such as a username and its password in the address book.
A flaw was found in the Avahi-daemon, where it initializes DNS transaction IDs randomly only once at startup, incrementing them sequentially after that. This predictable behavior facilitates DNS spoofing attacks, allowing attackers to guess transaction IDs.
A flaw was found in Avahi-daemon, which relies on fixed source ports for wide-area DNS queries. This issue simplifies attacks where malicious DNS responses are injected.
In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Add sendpage_ok() check to disable MSG_SPLICE_PAGES
While running ISER over SIW, the initiator machine encounters a warning
from skb_splice_from_iter() indicating that a slab page is being used in
send_page. To address this, it is better to add a sendpage_ok() check
within the driver itself, and if it returns 0, then MSG_SPLICE_PAGES flag
should be disabled before entering the network stack.
A similar issue has been discussed for NVMe in this thread:
https://lore.kernel.org/all/20240530142417.146696-1-ofir.gal@volumez.com/
WARNING: CPU: 0 PID: 5342 at net/core/skbuff.c:7140 skb_splice_from_iter+0x173/0x320
Call Trace:
tcp_sendmsg_locked+0x368/0xe40
siw_tx_hdt+0x695/0xa40 [siw]
siw_qp_sq_process+0x102/0xb00 [siw]
siw_sq_resume+0x39/0x110 [siw]
siw_run_sq+0x74/0x160 [siw]
kthread+0xd2/0x100
ret_from_fork+0x34/0x40
ret_from_fork_asm+0x1a/0x30
In the Linux kernel, the following vulnerability has been resolved:
nvme-multipath: defer partition scanning
We need to suppress the partition scan from occuring within the
controller's scan_work context. If a path error occurs here, the IO will
wait until a path becomes available or all paths are torn down, but that
action also occurs within scan_work, so it would deadlock. Defer the
partion scan to a different context that does not block scan_work.
In the Linux kernel, the following vulnerability has been resolved:
virtio_pci: Fix admin vq cleanup by using correct info pointer
vp_modern_avq_cleanup() and vp_del_vqs() clean up admin vq
resources by virtio_pci_vq_info pointer. The info pointer of admin
vq is stored in vp_dev->admin_vq.info instead of vp_dev->vqs[].
Using the info pointer from vp_dev->vqs[] for admin vq causes a
kernel NULL pointer dereference bug.
In vp_modern_avq_cleanup() and vp_del_vqs(), get the info pointer
from vp_dev->admin_vq.info for admin vq to clean up the resources.
Also make info ptr as argument of vp_del_vq() to be symmetric with
vp_setup_vq().
vp_reset calls vp_modern_avq_cleanup, and causes the Call Trace:
==================================================================
BUG: kernel NULL pointer dereference, address:0000000000000000
...
CPU: 49 UID: 0 PID: 4439 Comm: modprobe Not tainted 6.11.0-rc5 #1
RIP: 0010:vp_reset+0x57/0x90 [virtio_pci]
Call Trace:
<TASK>
...
? vp_reset+0x57/0x90 [virtio_pci]
? vp_reset+0x38/0x90 [virtio_pci]
virtio_reset_device+0x1d/0x30
remove_vq_common+0x1c/0x1a0 [virtio_net]
virtnet_remove+0xa1/0xc0 [virtio_net]
virtio_dev_remove+0x46/0xa0
...
virtio_pci_driver_exit+0x14/0x810 [virtio_pci]
==================================================================
In the Linux kernel, the following vulnerability has been resolved:
bpf: Add sk_is_inet and IS_ICSK check in tls_sw_has_ctx_tx/rx
As the introduction of the support for vsock and unix sockets in sockmap,
tls_sw_has_ctx_tx/rx cannot presume the socket passed in must be IS_ICSK.
vsock and af_unix sockets have vsock_sock and unix_sock instead of
inet_connection_sock. For these sockets, tls_get_ctx may return an invalid
pointer and cause page fault in function tls_sw_ctx_rx.
BUG: unable to handle page fault for address: 0000000000040030
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:sk_psock_strp_data_ready+0x23/0x60
Call Trace:
? __die+0x81/0xc3
? no_context+0x194/0x350
? do_page_fault+0x30/0x110
? async_page_fault+0x3e/0x50
? sk_psock_strp_data_ready+0x23/0x60
virtio_transport_recv_pkt+0x750/0x800
? update_load_avg+0x7e/0x620
vsock_loopback_work+0xd0/0x100
process_one_work+0x1a7/0x360
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x112/0x130
? __kthread_cancel_work+0x40/0x40
ret_from_fork+0x1f/0x40
v2:
- Add IS_ICSK check
v3:
- Update the commits in Fixes
In the Linux kernel, the following vulnerability has been resolved:
afs: Fix lock recursion
afs_wake_up_async_call() can incur lock recursion. The problem is that it
is called from AF_RXRPC whilst holding the ->notify_lock, but it tries to
take a ref on the afs_call struct in order to pass it to a work queue - but
if the afs_call is already queued, we then have an extraneous ref that must
be put... calling afs_put_call() may call back down into AF_RXRPC through
rxrpc_kernel_shutdown_call(), however, which might try taking the
->notify_lock again.
This case isn't very common, however, so defer it to a workqueue. The oops
looks something like:
BUG: spinlock recursion on CPU#0, krxrpcio/7001/1646
lock: 0xffff888141399b30, .magic: dead4ead, .owner: krxrpcio/7001/1646, .owner_cpu: 0
CPU: 0 UID: 0 PID: 1646 Comm: krxrpcio/7001 Not tainted 6.12.0-rc2-build3+ #4351
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Call Trace:
<TASK>
dump_stack_lvl+0x47/0x70
do_raw_spin_lock+0x3c/0x90
rxrpc_kernel_shutdown_call+0x83/0xb0
afs_put_call+0xd7/0x180
rxrpc_notify_socket+0xa0/0x190
rxrpc_input_split_jumbo+0x198/0x1d0
rxrpc_input_data+0x14b/0x1e0
? rxrpc_input_call_packet+0xc2/0x1f0
rxrpc_input_call_event+0xad/0x6b0
rxrpc_input_packet_on_conn+0x1e1/0x210
rxrpc_input_packet+0x3f2/0x4d0
rxrpc_io_thread+0x243/0x410
? __pfx_rxrpc_io_thread+0x10/0x10
kthread+0xcf/0xe0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x24/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Mark hrtimer to expire in hard interrupt context
Like commit 2c0d278f3293f ("KVM: LAPIC: Mark hrtimer to expire in hard
interrupt context") and commit 9090825fa9974 ("KVM: arm/arm64: Let the
timer expire in hardirq context on RT"), On PREEMPT_RT enabled kernels
unmarked hrtimers are moved into soft interrupt expiry mode by default.
Then the timers are canceled from an preempt-notifier which is invoked
with disabled preemption which is not allowed on PREEMPT_RT.
The timer callback is short so in could be invoked in hard-IRQ context.
So let the timer expire on hard-IRQ context even on -RT.
This fix a "scheduling while atomic" bug for PREEMPT_RT enabled kernels:
BUG: scheduling while atomic: qemu-system-loo/1011/0x00000002
Modules linked in: amdgpu rfkill nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat ns
CPU: 1 UID: 0 PID: 1011 Comm: qemu-system-loo Tainted: G W 6.12.0-rc2+ #1774
Tainted: [W]=WARN
Hardware name: Loongson Loongson-3A5000-7A1000-1w-CRB/Loongson-LS3A5000-7A1000-1w-CRB, BIOS vUDK2018-LoongArch-V2.0.0-prebeta9 10/21/2022
Stack : ffffffffffffffff 0000000000000000 9000000004e3ea38 9000000116744000
90000001167475a0 0000000000000000 90000001167475a8 9000000005644830
90000000058dc000 90000000058dbff8 9000000116747420 0000000000000001
0000000000000001 6a613fc938313980 000000000790c000 90000001001c1140
00000000000003fe 0000000000000001 000000000000000d 0000000000000003
0000000000000030 00000000000003f3 000000000790c000 9000000116747830
90000000057ef000 0000000000000000 9000000005644830 0000000000000004
0000000000000000 90000000057f4b58 0000000000000001 9000000116747868
900000000451b600 9000000005644830 9000000003a13998 0000000010000020
00000000000000b0 0000000000000004 0000000000000000 0000000000071c1d
...
Call Trace:
[<9000000003a13998>] show_stack+0x38/0x180
[<9000000004e3ea34>] dump_stack_lvl+0x84/0xc0
[<9000000003a71708>] __schedule_bug+0x48/0x60
[<9000000004e45734>] __schedule+0x1114/0x1660
[<9000000004e46040>] schedule_rtlock+0x20/0x60
[<9000000004e4e330>] rtlock_slowlock_locked+0x3f0/0x10a0
[<9000000004e4f038>] rt_spin_lock+0x58/0x80
[<9000000003b02d68>] hrtimer_cancel_wait_running+0x68/0xc0
[<9000000003b02e30>] hrtimer_cancel+0x70/0x80
[<ffff80000235eb70>] kvm_restore_timer+0x50/0x1a0 [kvm]
[<ffff8000023616c8>] kvm_arch_vcpu_load+0x68/0x2a0 [kvm]
[<ffff80000234c2d4>] kvm_sched_in+0x34/0x60 [kvm]
[<9000000003a749a0>] finish_task_switch.isra.0+0x140/0x2e0
[<9000000004e44a70>] __schedule+0x450/0x1660
[<9000000004e45cb0>] schedule+0x30/0x180
[<ffff800002354c70>] kvm_vcpu_block+0x70/0x120 [kvm]
[<ffff800002354d80>] kvm_vcpu_halt+0x60/0x3e0 [kvm]
[<ffff80000235b194>] kvm_handle_gspr+0x3f4/0x4e0 [kvm]
[<ffff80000235f548>] kvm_handle_exit+0x1c8/0x260 [kvm]
The Anonymous Restricted Content plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.6.5 via the WordPress core search feature. This makes it possible for unauthenticated attackers to extract sensitive data from posts that have been restricted to logged-in users.
The LSX Tour Operator plugin for WordPress is vulnerable to Stored Cross-Site Scripting via SVG File uploads in all versions up to, and including, 1.4.9 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses the SVG file.
The Taskbuilder WordPress plugin before 3.0.5 does not sanitize user input into the 'load_orders' parameter and uses it in a SQL statement, allowing high privilege users such as admin to perform SQL Injection attacks
The Branda – White Label & Branding, Custom Login Page Customizer plugin for WordPress is vulnerable to Reflected Cross-Site Scripting due to the use of remove_query_arg without appropriate escaping on the URL in all versions up to, and including, 3.4.19. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.
The Product Designer plugin for WordPress is vulnerable to Stored Cross-Site Scripting via SVG File uploads in all versions up to, and including, 1.0.36 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses the SVG file.
Opencast is free and open source software for automated video capture and distribution. First noticed in Opencast 13 and 14, Opencast's Elasticsearch integration may generate syntactically invalid Elasticsearch queries in relation to previously acceptable search queries. From Opencast version 11.4 and newer, Elasticsearch queries are retried a configurable number of times in the case of error to handle temporary losses of connection to Elasticsearch. These invalid queries would fail, causing the retry mechanism to begin requerying with the same syntactically invalid query immediately, in an infinite loop. This causes a massive increase in log size which can in some cases cause a denial of service due to disk exhaustion.
Opencast 13.10 and Opencast 14.3 contain patches which address the base issue, with Opencast 16.7 containing changes which harmonize the search behaviour between the admin UI and external API. Users are strongly recommended to upgrade as soon as possible if running versions prior to 13.10 or 14.3. While the relevant endpoints require (by default) `ROLE_ADMIN` or `ROLE_API_SERIES_VIEW`, the problem queries are otherwise innocuous. This issue could be easily triggered by normal administrative work on an affected Opencast system. Those who run a version newer than 13.10 and 14.3 and see different results when searching in their admin UI vs your external API or LMS, may resolve the issue by upgrading to 16.7. No known workarounds for the vulnerability are available.
The Run Contests, Raffles, and Giveaways with ContestsWP plugin for WordPress is vulnerable to Reflected Cross-Site Scripting due to the use of add_query_arg without appropriate escaping on the URL in all versions up to, and including, 2.0.3. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.
The Include Mastodon Feed plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'include-mastodon-feed' shortcode in all versions up to, and including, 1.9.4 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The Community by PeepSo – Download from PeepSo.com plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the ‘filter’ parameter in all versions up to, and including, 7.0.3.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.
The Grey Owl Lightbox plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'gol_button' shortcode in all versions up to, and including, 1.6.1 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The StreamWeasels Online Status Bar plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'sw-status-bar' shortcode in all versions up to, and including, 2.1.9 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The salavat counter Plugin plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'page' parameter in all versions up to, and including, 0.9.4 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.
The SuevaFree Essential Kit plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'counter' shortcode in all versions up to, and including, 1.1.3 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The Lazy load videos and sticky control plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'lazy-load-videos-and-sticky-control' shortcode in all versions up to, and including, 3.0.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The Slick Sitemap plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'slick-sitemap' shortcode in all versions up to, and including, 2.0.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The WIP Incoming Lite plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 1.1.1. This is due to missing or incorrect nonce validation on the save_option() function. This makes it possible for unauthenticated attackers to update settings and inject malicious web scripts via a forged request granted they can trick a site administrator into performing an action such as clicking on a link.
The RecipePress Reloaded plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Recipe Ingredients in all versions up to, and including, 2.12.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The Shine PDF Embeder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'shinepdf' shortcode in all versions up to, and including, 1.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The Dino Game – Embed Google Chrome Dinosaur Game in WordPress plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'dino-game' shortcode in all versions up to, and including, 1.1.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The Subaccounts for WooCommerce plugin for WordPress is vulnerable to Reflected Cross-Site Scripting due to the use of add_query_arg without appropriate escaping on the URL in all versions up to, and including, 1.6.0. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.
The Page Parts plugin for WordPress is vulnerable to Reflected Cross-Site Scripting due to the use of remove_query_arg without appropriate escaping on the URL in all versions up to, and including, 1.4.3. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.
The Lock User Account plugin for WordPress is vulnerable to user lock bypass in all versions up to, and including, 1.0.5. This is due to permitting application password logins when user accounts are locked. This makes it possible for authenticated attackers, with existing application passwords, to interact with the vulnerable site via an API such as XML-RPC or REST despite their account being locked.
The WPAdverts – Classifieds Plugin plugin for WordPress is vulnerable to Reflected Cross-Site Scripting due to the use of add_query_arg & remove_query_arg without appropriate escaping on the URL in all versions up to, and including, 2.1.7. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.
The If-So Dynamic Content Personalization plugin for WordPress is vulnerable to Information Exposure in all versions up to, and including, 1.9.2.1 via the 'ifso-show-post' shortcode due to insufficient restrictions on which posts can be included. This makes it possible for authenticated attackers, with Contributor-level access and above, to extract data from private or draft posts created via Elementor that they should not have access to.
The Easiest Funnel Builder For WordPress & WooCommerce by WPFunnels plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'post_id' parameter in all versions up to, and including, 3.5.5 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. This was partially patched in 3.5.4 and fully patched in 3.5.5.
The Theme Builder For Elementor plugin for WordPress is vulnerable to Information Exposure in all versions up to, and including, 1.2.2 via the 'elementor-template' shortcode due to insufficient restrictions on which posts can be included. This makes it possible for authenticated attackers, with Contributor-level access and above, to extract data from private or draft posts created by Elementor that they should not have access to.
The Friendly Functions for Welcart plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 1.2.4. This is due to missing nonce validation on the settings update functionality. This makes it possible for unauthenticated attackers to inject malicious web scripts via a forged request granted they can trick a site administrator into performing an action such as clicking on a link.
The UltraAddons – Elementor Addons (Header Footer Builder, Custom Font, Custom CSS,Woo Widget, Menu Builder, Anywhere Elementor Shortcode) plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 1.1.8 via the show_template due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with Contributor-level access and above, to expose the contents of draft, private, and pending posts.
The Announcement & Notification Banner – Bulletin plugin for WordPress is vulnerable to Reflected Cross-Site Scripting due to the use of add_query_arg and remove_query_arg without appropriate escaping on the URL in all versions up to, and including, 3.11.7. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.
The affiliate-toolkit plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via a URL in all versions up to, and including, 3.6.7 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.
The ForumEngine theme for WordPress is vulnerable to Reflected Cross-Site Scripting via a URL in all versions up to, and including, 1.8 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.
The Bard Extra plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the bardxtra_import_xml() function in all versions up to, and including, 1.2.7. This makes it possible for authenticated attackers, with subscriber-level access and above, to import demo data.
The Co-marquage service-public.fr plugin for WordPress is vulnerable to Reflected Cross-Site Scripting due to the use of add_query_arg without appropriate escaping on the URL in all versions up to, and including, 0.5.76. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.
The Stratum – Elementor Widgets plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.4.4 in includes/templates/content-switcher.php. This makes it possible for authenticated attackers, with Contributor-level access and above, to extract sensitive private, pending, and draft template data.
The Beds24 Online Booking plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's beds24-link shortcode in all versions up to, and including, 2.0.27 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.