In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: Fix NULL Dereference in asoc_qcom_lpass_cpu_platform_probe()
A devm_kzalloc() in asoc_qcom_lpass_cpu_platform_probe() could
possibly return NULL pointer. NULL Pointer Dereference may be
triggerred without addtional check.
Add a NULL check for the returned pointer.
In the Linux kernel, the following vulnerability has been resolved:
x86: fix user address masking non-canonical speculation issue
It turns out that AMD has a "Meltdown Lite(tm)" issue with non-canonical
accesses in kernel space. And so using just the high bit to decide
whether an access is in user space or kernel space ends up with the good
old "leak speculative data" if you have the right gadget using the
result:
CVE-2020-12965 “Transient Execution of Non-Canonical Accesses“
Now, the kernel surrounds the access with a STAC/CLAC pair, and those
instructions end up serializing execution on older Zen architectures,
which closes the speculation window.
But that was true only up until Zen 5, which renames the AC bit [1].
That improves performance of STAC/CLAC a lot, but also means that the
speculation window is now open.
Note that this affects not just the new address masking, but also the
regular valid_user_address() check used by access_ok(), and the asm
version of the sign bit check in the get_user() helpers.
It does not affect put_user() or clear_user() variants, since there's no
speculative result to be used in a gadget for those operations.
In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix incorrect pci_for_each_dma_alias() for non-PCI devices
Previously, the domain_context_clear() function incorrectly called
pci_for_each_dma_alias() to set up context entries for non-PCI devices.
This could lead to kernel hangs or other unexpected behavior.
Add a check to only call pci_for_each_dma_alias() for PCI devices. For
non-PCI devices, domain_context_clear_one() is called directly.
In the Linux kernel, the following vulnerability has been resolved:
USB: gadget: dummy-hcd: Fix "task hung" problem
The syzbot fuzzer has been encountering "task hung" problems ever
since the dummy-hcd driver was changed to use hrtimers instead of
regular timers. It turns out that the problems are caused by a subtle
difference between the timer_pending() and hrtimer_active() APIs.
The changeover blindly replaced the first by the second. However,
timer_pending() returns True when the timer is queued but not when its
callback is running, whereas hrtimer_active() returns True when the
hrtimer is queued _or_ its callback is running. This difference
occasionally caused dummy_urb_enqueue() to think that the callback
routine had not yet started when in fact it was almost finished. As a
result the hrtimer was not restarted, which made it impossible for the
driver to dequeue later the URB that was just enqueued. This caused
usb_kill_urb() to hang, and things got worse from there.
Since hrtimers have no API for telling when they are queued and the
callback isn't running, the driver must keep track of this for itself.
That's what this patch does, adding a new "timer_pending" flag and
setting or clearing it at the appropriate times.
In the Linux kernel, the following vulnerability has been resolved:
arm64: probes: Remove broken LDR (literal) uprobe support
The simulate_ldr_literal() and simulate_ldrsw_literal() functions are
unsafe to use for uprobes. Both functions were originally written for
use with kprobes, and access memory with plain C accesses. When uprobes
was added, these were reused unmodified even though they cannot safely
access user memory.
There are three key problems:
1) The plain C accesses do not have corresponding extable entries, and
thus if they encounter a fault the kernel will treat these as
unintentional accesses to user memory, resulting in a BUG() which
will kill the kernel thread, and likely lead to further issues (e.g.
lockup or panic()).
2) The plain C accesses are subject to HW PAN and SW PAN, and so when
either is in use, any attempt to simulate an access to user memory
will fault. Thus neither simulate_ldr_literal() nor
simulate_ldrsw_literal() can do anything useful when simulating a
user instruction on any system with HW PAN or SW PAN.
3) The plain C accesses are privileged, as they run in kernel context,
and in practice can access a small range of kernel virtual addresses.
The instructions they simulate have a range of +/-1MiB, and since the
simulated instructions must itself be a user instructions in the
TTBR0 address range, these can address the final 1MiB of the TTBR1
acddress range by wrapping downwards from an address in the first
1MiB of the TTBR0 address range.
In contemporary kernels the last 8MiB of TTBR1 address range is
reserved, and accesses to this will always fault, meaning this is no
worse than (1).
Historically, it was theoretically possible for the linear map or
vmemmap to spill into the final 8MiB of the TTBR1 address range, but
in practice this is extremely unlikely to occur as this would
require either:
* Having enough physical memory to fill the entire linear map all the
way to the final 1MiB of the TTBR1 address range.
* Getting unlucky with KASLR randomization of the linear map such
that the populated region happens to overlap with the last 1MiB of
the TTBR address range.
... and in either case if we were to spill into the final page there
would be larger problems as the final page would alias with error
pointers.
Practically speaking, (1) and (2) are the big issues. Given there have
been no reports of problems since the broken code was introduced, it
appears that no-one is relying on probing these instructions with
uprobes.
Avoid these issues by not allowing uprobes on LDR (literal) and LDRSW
(literal), limiting the use of simulate_ldr_literal() and
simulate_ldrsw_literal() to kprobes. Attempts to place uprobes on LDR
(literal) and LDRSW (literal) will be rejected as
arm_probe_decode_insn() will return INSN_REJECTED. In future we can
consider introducing working uprobes support for these instructions, but
this will require more significant work.
In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Set SDEV_OFFLINE when UFS is shut down
There is a history of deadlock if reboot is performed at the beginning
of booting. SDEV_QUIESCE was set for all LU's scsi_devices by UFS
shutdown, and at that time the audio driver was waiting on
blk_mq_submit_bio() holding a mutex_lock while reading the fw binary.
After that, a deadlock issue occurred while audio driver shutdown was
waiting for mutex_unlock of blk_mq_submit_bio(). To solve this, set
SDEV_OFFLINE for all LUs except WLUN, so that any I/O that comes down
after a UFS shutdown will return an error.
[ 31.907781]I[0: swapper/0: 0] 1 130705007 1651079834 11289729804 0 D( 2) 3 ffffff882e208000 * init [device_shutdown]
[ 31.907793]I[0: swapper/0: 0] Mutex: 0xffffff8849a2b8b0: owner[0xffffff882e28cb00 kworker/6:0 :49]
[ 31.907806]I[0: swapper/0: 0] Call trace:
[ 31.907810]I[0: swapper/0: 0] __switch_to+0x174/0x338
[ 31.907819]I[0: swapper/0: 0] __schedule+0x5ec/0x9cc
[ 31.907826]I[0: swapper/0: 0] schedule+0x7c/0xe8
[ 31.907834]I[0: swapper/0: 0] schedule_preempt_disabled+0x24/0x40
[ 31.907842]I[0: swapper/0: 0] __mutex_lock+0x408/0xdac
[ 31.907849]I[0: swapper/0: 0] __mutex_lock_slowpath+0x14/0x24
[ 31.907858]I[0: swapper/0: 0] mutex_lock+0x40/0xec
[ 31.907866]I[0: swapper/0: 0] device_shutdown+0x108/0x280
[ 31.907875]I[0: swapper/0: 0] kernel_restart+0x4c/0x11c
[ 31.907883]I[0: swapper/0: 0] __arm64_sys_reboot+0x15c/0x280
[ 31.907890]I[0: swapper/0: 0] invoke_syscall+0x70/0x158
[ 31.907899]I[0: swapper/0: 0] el0_svc_common+0xb4/0xf4
[ 31.907909]I[0: swapper/0: 0] do_el0_svc+0x2c/0xb0
[ 31.907918]I[0: swapper/0: 0] el0_svc+0x34/0xe0
[ 31.907928]I[0: swapper/0: 0] el0t_64_sync_handler+0x68/0xb4
[ 31.907937]I[0: swapper/0: 0] el0t_64_sync+0x1a0/0x1a4
[ 31.908774]I[0: swapper/0: 0] 49 0 11960702 11236868007 0 D( 2) 6 ffffff882e28cb00 * kworker/6:0 [__bio_queue_enter]
[ 31.908783]I[0: swapper/0: 0] Call trace:
[ 31.908788]I[0: swapper/0: 0] __switch_to+0x174/0x338
[ 31.908796]I[0: swapper/0: 0] __schedule+0x5ec/0x9cc
[ 31.908803]I[0: swapper/0: 0] schedule+0x7c/0xe8
[ 31.908811]I[0: swapper/0: 0] __bio_queue_enter+0xb8/0x178
[ 31.908818]I[0: swapper/0: 0] blk_mq_submit_bio+0x194/0x67c
[ 31.908827]I[0: swapper/0: 0] __submit_bio+0xb8/0x19c
The LSC Smart Connect Indoor IP Camera V7.6.32 is vulnerable to an information disclosure issue where live camera footage can be accessed through the RTSP protocol on port 8554 without requiring authentication. This allows unauthorized users with network access to view the camera's feed, potentially compromising user privacy and security. No credentials or special permissions are required, and access can be gained remotely over the network.
In the Linux kernel, the following vulnerability has been resolved:
net: fec: don't save PTP state if PTP is unsupported
Some platforms (such as i.MX25 and i.MX27) do not support PTP, so on
these platforms fec_ptp_init() is not called and the related members
in fep are not initialized. However, fec_ptp_save_state() is called
unconditionally, which causes the kernel to panic. Therefore, add a
condition so that fec_ptp_save_state() is not called if PTP is not
supported.
In the Linux kernel, the following vulnerability has been resolved:
nouveau/dmem: Fix vulnerability in migrate_to_ram upon copy error
The `nouveau_dmem_copy_one` function ensures that the copy push command is
sent to the device firmware but does not track whether it was executed
successfully.
In the case of a copy error (e.g., firmware or hardware failure), the
copy push command will be sent via the firmware channel, and
`nouveau_dmem_copy_one` will likely report success, leading to the
`migrate_to_ram` function returning a dirty HIGH_USER page to the user.
This can result in a security vulnerability, as a HIGH_USER page that may
contain sensitive or corrupted data could be returned to the user.
To prevent this vulnerability, we allocate a zero page. Thus, in case of
an error, a non-dirty (zero) page will be returned to the user.
In the Linux kernel, the following vulnerability has been resolved:
sfc: Don't invoke xdp_do_flush() from netpoll.
Yury reported a crash in the sfc driver originated from
netpoll_send_udp(). The netconsole sends a message and then netpoll
invokes the driver's NAPI function with a budget of zero. It is
dedicated to allow driver to free TX resources, that it may have used
while sending the packet.
In the netpoll case the driver invokes xdp_do_flush() unconditionally,
leading to crash because bpf_net_context was never assigned.
Invoke xdp_do_flush() only if budget is not zero.
In the Linux kernel, the following vulnerability has been resolved:
dm vdo: don't refer to dedupe_context after releasing it
Clear the dedupe_context pointer in a data_vio whenever ownership of
the context is lost, so that vdo can't examine it accidentally.
System logs could be accessed through web management application due to a lack of access control.
An attacker can obtain the following sensitive information:
• Wi-Fi access point credentials to which the EV charger can connect.
• APN web address and credentials.
• IPSEC credentials.
• Web interface access credentials for user and admin accounts.
• JuiceBox system components (software installed, model, firmware version, etc.).
• C2G configuration details.
• Internal IP addresses.
• OTA firmware update configurations (DNS servers).
All the credentials are stored in logs in an unencrypted plaintext format.
The Shortcodes Blocks Creator Ultimate plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'scu' shortcode in versions up to, and including, 2.1.3 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers with contributor-level and above permissions to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
Meshtastic firmware is a device firmware for the Meshtastic project. The Meshtastic firmware does not check for packets claiming to be from the special broadcast address (0xFFFFFFFF) which could result in unexpected behavior and potential for DDoS attacks on the network. A malicious actor could craft a packet to be from that address which would result in an amplification of this one message into every node on the network sending multiple messages. Such an attack could result in degraded network performance for all users as the available bandwidth is consumed. This issue has been addressed in release version 2.5.6. All users are advised to upgrade. There are no known workarounds for this vulnerability.
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Michael Custom post type templates for Elementor custom-post-type-templates-for-elementor allows Stored XSS.This issue affects Custom post type templates for Elementor: from n/a through <= 1.10.1.
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in HasThemes HT Builder – WordPress Theme Builder for Elementor ht-builder allows Stored XSS.This issue affects HT Builder – WordPress Theme Builder for Elementor: from n/a through <= 1.3.0.
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in CodeRevolution WP Pocket URLs wp-pocket-urls allows Stored XSS.This issue affects WP Pocket URLs: from n/a through <= 1.0.3.
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in CrestaProject Cresta Addons for Elementor cresta-addons-for-elementor allows Stored XSS.This issue affects Cresta Addons for Elementor: from n/a through <= 1.0.9.
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Marcel Pol Elo Rating Shortcode elo-rating-shortcode allows Stored XSS.This issue affects Elo Rating Shortcode: from n/a through <= 1.0.3.
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Ajay Knowledge Base knowledgebase allows Stored XSS.This issue affects Knowledge Base: from n/a through <= 2.2.0.
Server-Side Request Forgery (SSRF) vulnerability in Noor Alam Magical Addons For Elementor magical-addons-for-elementor allows Server Side Request Forgery.This issue affects Magical Addons For Elementor: from n/a through <= 1.2.1.
The issue was addressed with improved bounds checks. This issue is fixed in iOS 17.7.1 and iPadOS 17.7.1, iOS 18.1 and iPadOS 18.1, macOS Sequoia 15.1, macOS Sonoma 14.7.1, macOS Ventura 13.7.1, tvOS 18.1, visionOS 2.1, watchOS 11.1. Parsing a maliciously crafted video file may lead to unexpected system termination.
The issue was addressed with improved bounds checks. This issue is fixed in iOS 17.7.1 and iPadOS 17.7.1, iOS 18.1 and iPadOS 18.1, macOS Sequoia 15.1, macOS Sonoma 14.7.1, macOS Ventura 13.7.1, tvOS 18.1, visionOS 2.1, watchOS 11.1. Parsing a maliciously crafted video file may lead to unexpected system termination.
The issue was addressed with improved bounds checks. This issue is fixed in iOS 17.7.1 and iPadOS 17.7.1, iOS 18.1 and iPadOS 18.1, macOS Sequoia 15.1, macOS Sonoma 14.7.1, macOS Ventura 13.7.1, tvOS 18.1, visionOS 2.1, watchOS 11.1. Parsing a maliciously crafted video file may lead to unexpected system termination.
Cross Site Scripting vulnerability in FiberHome HG6544C RP2743 allows an attacker to execute arbitrary code via the SSID field in the WIFI Clients List not being sanitized
Altai Technologies Ltd Altai IX500 Indoor 22 802.11ac Wave 2 AP After login, there are file reads in the background, and attackers can obtain sensitive information such as user credentials, system configuration, and database connection strings, which can lead to data breaches and identity theft.
Altai Technologies Ltd Altai X500 Indoor 22 802.11ac Wave 2 AP web Management Weak password leakage in the background may lead to unauthorized access, data theft, and network attacks, seriously threatening network security.
An issue in the Bluetooth Low Energy implementation of Cypress Bluetooth SDK v3.66 allows attackers to cause a Denial of Service (DoS) via supplying a crafted LL_PAUSE_ENC_REQ packet.
Broken Access Control vulnerability in Automattic Newspack allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Newspack: from n/a through 3.8.6.
Missing Authorization vulnerability in Presto Made, Inc Presto Player allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Presto Player: from n/a through 3.0.2.
Missing Authorization vulnerability in JS Help Desk JS Help Desk – Best Help Desk & Support Plugin allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects JS Help Desk – Best Help Desk & Support Plugin: from n/a through 2.8.6.
Missing Authorization vulnerability in WPBackItUp Backup and Restore WordPress allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Backup and Restore WordPress: from n/a through 1.50.
Access Control vulnerability in WPBackItUp Backup and Restore WordPress allows .
This issue affects Backup and Restore WordPress: from n/a through 1.50.
Missing Authorization vulnerability in ووکامرس فارسی Persian WooCommerce allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Persian WooCommerce: from n/a through 7.1.6.
Missing Authorization vulnerability in creativemotion Social Slider Feed allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Social Slider Feed: from n/a through 2.2.2.
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in PluginOps MailChimp Subscribe Forms allows Stored XSS.This issue affects MailChimp Subscribe Forms : from n/a through 4.0.9.9.
Missing Authorization vulnerability in Bitly allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Bitly: from n/a through 2.7.2.
Missing Authorization vulnerability in Ahmed Kaludi, Mohammed Kaludi AMP for WP allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects AMP for WP: from n/a through 1.0.96.1.