In the Linux kernel, the following vulnerability has been resolved:
PCI/IOV: Fix race between SR-IOV enable/disable and hotplug
Commit 05703271c3cd ("PCI/IOV: Add PCI rescan-remove locking when
enabling/disabling SR-IOV") tried to fix a race between the VF removal
inside sriov_del_vfs() and concurrent hot unplug by taking the PCI
rescan/remove lock in sriov_del_vfs(). Similarly the PCI rescan/remove lock
was also taken in sriov_add_vfs() to protect addition of VFs.
This approach however causes deadlock on trying to remove PFs with SR-IOV
enabled because PFs disable SR-IOV during removal and this removal happens
under the PCI rescan/remove lock. So the original fix had to be reverted.
Instead of taking the PCI rescan/remove lock in sriov_add_vfs() and
sriov_del_vfs(), fix the race that occurs with SR-IOV enable and disable vs
hotplug higher up in the callchain by taking the lock in
sriov_numvfs_store() before calling into the driver's sriov_configure()
callback.
In the Linux kernel, the following vulnerability has been resolved:
mm/damon/vaddr: do not repeat pte_offset_map_lock() until success
DAMON's virtual address space operation set implementation (vaddr) calls
pte_offset_map_lock() inside the page table walk callback function. This
is for reading and writing page table accessed bits. If
pte_offset_map_lock() fails, it retries by returning the page table walk
callback function with ACTION_AGAIN.
pte_offset_map_lock() can continuously fail if the target is a pmd
migration entry, though. Hence it could cause an infinite page table walk
if the migration cannot be done until the page table walk is finished.
This indeed caused a soft lockup when CPU hotplugging and DAMON were
running in parallel.
Avoid the infinite loop by simply not retrying the page table walk. DAMON
is promising only a best-effort accuracy, so missing access to such pages
is no problem.
In the Linux kernel, the following vulnerability has been resolved:
pidfs: validate extensible ioctls
Validate extensible ioctls stricter than we do now.
In the Linux kernel, the following vulnerability has been resolved:
io_uring/rsrc: don't rely on user vaddr alignment
There is no guaranteed alignment for user pointers, however the
calculation of an offset of the first page into a folio after coalescing
uses some weird bit mask logic, get rid of it.
A vulnerability in Synology Mail Server allows remote authenticated attackers to read and write non-sensitive settings, and disable some non-critical functions.
A flaw has been found in dayrui XunRuiCMS up to 4.7.1. This vulnerability affects unknown code of the file admin79f2ec220c7e.php?c=api&m=test_site_domain of the component Project Domain Change Test. This manipulation of the argument v causes server-side request forgery. It is possible to initiate the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was detected in dayrui XunRuiCMS up to 4.7.1. This affects an unknown part of the file /admin79f2ec220c7e.php?c=api&m=demo&name=mobile of the component Domain Name Binding Page. The manipulation results in cross site scripting. The attack may be performed from remote. A high complexity level is associated with this attack. It is indicated that the exploitability is difficult. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A security vulnerability has been detected in dayrui XunRuiCMS up to 4.7.1. Affected by this issue is some unknown functionality of the file /admind45f74adbd95.php?c=field&m=add&rname=site&rid=1&page=1 of the component Add Data Validation Page. The manipulation of the argument data[name] leads to cross site scripting. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
Improper control of dynamically-managed code resources vulnerability in WebAPI component in Synology DiskStation Manager (DSM) before 7.1.1-42962-8 and 7.2.1-69057-2 and 7.2.2-72806 and Synology Unified Controller (DSMUC) before 3.1.4-23079 allows remote authenticated users to obtain privileges without consent via unspecified vectors.
Out-of-bounds write vulnerability in cgi components in Synology DiskStation Manager (DSM) before 7.2.1-69057-2 and 7.2.2-72806 and Synology Unified Controller (DSMUC) before 3.1.4-23079 allows remote attackers to conduct denial-of-service attacks via unspecified vectors.
Cross-Site Request Forgery (CSRF) vulnerability in WebAPI Framework in Synology DiskStation Manager (DSM) before 7.2.1-69057-2 and 7.2.2-72806 and Synology Unified Controller (DSMUC) before 3.1.4-23079 allows remote attackers to execute arbitrary code via unspecified vectors.
A weakness has been identified in dayrui XunRuiCMS up to 4.7.1. Affected by this vulnerability is an unknown functionality of the file /admind45f74adbd95.php?c=field&m=add&rname=site&rid=1&page=0 of the component Add Display Name Field. Executing a manipulation of the argument data[name] can lead to cross site scripting. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
A security flaw has been discovered in dayrui XunRuiCMS up to 4.7.1. Affected is an unknown function of the file /admind45f74adbd95.php?c=email&m=add of the component Email Setting Handler. Performing a manipulation results in server-side request forgery. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
In the Linux kernel, the following vulnerability has been resolved:
xfrm: delete x->tunnel as we delete x
The ipcomp fallback tunnels currently get deleted (from the various
lists and hashtables) as the last user state that needed that fallback
is destroyed (not deleted). If a reference to that user state still
exists, the fallback state will remain on the hashtables/lists,
triggering the WARN in xfrm_state_fini. Because of those remaining
references, the fix in commit f75a2804da39 ("xfrm: destroy xfrm_state
synchronously on net exit path") is not complete.
We recently fixed one such situation in TCP due to defered freeing of
skbs (commit 9b6412e6979f ("tcp: drop secpath at the same time as we
currently drop dst")). This can also happen due to IP reassembly: skbs
with a secpath remain on the reassembly queue until netns
destruction. If we can't guarantee that the queues are flushed by the
time xfrm_state_fini runs, there may still be references to a (user)
xfrm_state, preventing the timely deletion of the corresponding
fallback state.
Instead of chasing each instance of skbs holding a secpath one by one,
this patch fixes the issue directly within xfrm, by deleting the
fallback state as soon as the last user state depending on it has been
deleted. Destruction will still happen when the final reference is
dropped.
A separate lockdep class for the fallback state is required since
we're going to lock x->tunnel while x is locked.
In the Linux kernel, the following vulnerability has been resolved:
af_unix: Initialise scc_index in unix_add_edge().
Quang Le reported that the AF_UNIX GC could garbage-collect a
receive queue of an alive in-flight socket, with a nice repro.
The repro consists of three stages.
1)
1-a. Create a single cyclic reference with many sockets
1-b. close() all sockets
1-c. Trigger GC
2)
2-a. Pass sk-A to an embryo sk-B
2-b. Pass sk-X to sk-X
2-c. Trigger GC
3)
3-a. accept() the embryo sk-B
3-b. Pass sk-B to sk-C
3-c. close() the in-flight sk-A
3-d. Trigger GC
As of 2-c, sk-A and sk-X are linked to unix_unvisited_vertices,
and unix_walk_scc() groups them into two different SCCs:
unix_sk(sk-A)->vertex->scc_index = 2 (UNIX_VERTEX_INDEX_START)
unix_sk(sk-X)->vertex->scc_index = 3
Once GC completes, unix_graph_grouped is set to true.
Also, unix_graph_maybe_cyclic is set to true due to sk-X's
cyclic self-reference, which makes close() trigger GC.
At 3-b, unix_add_edge() allocates unix_sk(sk-B)->vertex and
links it to unix_unvisited_vertices.
unix_update_graph() is called at 3-a. and 3-b., but neither
unix_graph_grouped nor unix_graph_maybe_cyclic is changed
because both sk-B's listener and sk-C are not in-flight.
3-c decrements sk-A's file refcnt to 1.
Since unix_graph_grouped is true at 3-d, unix_walk_scc_fast()
is finally called and iterates 3 sockets sk-A, sk-B, and sk-X:
sk-A -> sk-B (-> sk-C)
sk-X -> sk-X
This is totally fine. All of them are not yet close()d and
should be grouped into different SCCs.
However, unix_vertex_dead() misjudges that sk-A and sk-B are
in the same SCC and sk-A is dead.
unix_sk(sk-A)->scc_index == unix_sk(sk-B)->scc_index <-- Wrong!
&&
sk-A's file refcnt == unix_sk(sk-A)->vertex->out_degree
^-- 1 in-flight count for sk-B
-> sk-A is dead !?
The problem is that unix_add_edge() does not initialise scc_index.
Stage 1) is used for heap spraying, making a newly allocated
vertex have vertex->scc_index == 2 (UNIX_VERTEX_INDEX_START)
set by unix_walk_scc() at 1-c.
Let's track the max SCC index from the previous unix_walk_scc()
call and assign the max + 1 to a new vertex's scc_index.
This way, we can continue to avoid Tarjan's algorithm while
preventing misjudgments.
Central Dogma versions before 0.78.0 contain an Open Redirect vulnerability that allows attackers to redirect users to untrusted sites via specially crafted URLs, potentially facilitating phishing attacks and credential theft.
A stored Cross-Site Scripting (XSS) vulnerability has been found in Seafile v12.0.10. This vulnerability allows an attacker to execute arbitrary code in the victim's browser by storing malicious payloads with POST parámetro 'p' in '/api/v2.1/repos/{repo_id}/file/'.
A stored Cross-Site Scripting (XSS) vulnerability has been found in Seafile v12.0.10. This vulnerability allows an attacker to execute arbitrary code in the victim's browser by storing malicious payloads with PUT parámetro 'name' in '/api/v2.1/user/'.
A flaw was found in ansible-collection-community-general. This vulnerability allows for information exposure (IE) of sensitive credentials, specifically plaintext passwords, via verbose output when running Ansible with debug modes. Attackers with access to logs could retrieve these secrets and potentially compromise Keycloak accounts or administrative access.
The Custom Post Type UI plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 1.18.0. This is due to the plugin not verifying that a user has the required capability to perform actions in the "cptui_process_post_type" function. This makes it possible for authenticated attackers, with subscriber level access and above, to add, edit, or delete custom post types in limited situations.
The Beaver Builder – WordPress Page Builder plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 2.9.4. This is due to the plugin not properly verifying a user's authorization in the disable() function. This makes it possible for authenticated attackers, with contributor level access and above, to disable the Beaver Builder layout on arbitrary posts and pages, causing content integrity issues and layout disruption on those pages.
The Clik stats plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the `$_SERVER['PHP_SELF']` parameter in all versions up to, and including, 0.8 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.
The Omnichannel for WooCommerce: Google, Amazon, eBay & Walmart Integration – Powered by Codisto plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the sync() function in all versions up to, and including, 1.3.65 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
The WebP Express plugin for WordPress is vulnerable to information exposure via config files in all versions up to, and including, 0.25.9. This is due to the plugin not properly randomizing the name of the config file to prevent direct access on NGINX. This makes it possible for unauthenticated attackers to extract configuration data.
MCP Server Kubernetes is an MCP Server that can connect to a Kubernetes cluster and manage it. Prior to 2.9.8, there is a security issue exists in the exec_in_pod tool of the mcp-server-kubernetes MCP Server. The tool accepts user-provided commands in both array and string formats. When a string format is provided, it is passed directly to shell interpretation (sh -c) without input validation, allowing shell metacharacters to be interpreted. This vulnerability can be exploited through direct command injection or indirect prompt injection attacks, where AI agents may execute commands without explicit user intent. This vulnerability is fixed in 2.9.8.
LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. Prior to 1.6.52, an out-of-bounds read vulnerability in libpng's simplified API allows reading up to 1012 bytes beyond the png_sRGB_base[512] array when processing valid palette PNG images with partial transparency and gamma correction. The PNG files that trigger this vulnerability are valid per the PNG specification; the bug is in libpng's internal state management. Upgrade to libpng 1.6.52 or later.
An issue was discovered in Fanvil x210 V2 2.12.20 allowing unauthenticated attackers on the local network to access administrative functions of the device (e.g. file upload, firmware update, reboot...) via a crafted authentication bypass.
Cal.com is open-source scheduling software. Prior to 5.9.8, A flaw in the login credentials provider allows an attacker to bypass password verification when a TOTP code is provided, potentially gaining unauthorized access to user accounts. This issue exists due to problematic conditional logic in the authentication flow. This vulnerability is fixed in 5.9.8.
Rhino is an open-source implementation of JavaScript written entirely in Java. Prior to 1.8.1, 1.7.15.1, and 1.7.14.1, when an application passed an attacker controlled float poing number into the toFixed() function, it might lead to high CPU consumption and a potential Denial of Service. Small numbers go through this call stack: NativeNumber.numTo > DToA.JS_dtostr > DToA.JS_dtoa > DToA.pow5mult where pow5mult attempts to raise 5 to a ridiculous power. This vulnerability is fixed in 1.8.1, 1.7.15.1, and 1.7.14.1.
Coder allows organizations to provision remote development environments via Terraform. Prior to 2.26.5, 2.27.7, and 2.28.4, Workspace Agent manifests containing sensitive values were logged in plaintext unsanitized. An attacker with limited local access to the Coder Workspace (VM, K8s Pod etc.) or a third-party system (SIEM, logging stack) could access those logs. This vulnerability is fixed in 2.26.5, 2.27.7, and 2.28.4.
Step CA is an online certificate authority for secure, automated certificate management for DevOps. Prior to 0.29.0, there is an improper authorization check for SSH certificate revocation. This affects deployments configured with the SSHPOP provisioner. This vulnerability is fixed in 0.29.0.
alexusmai laravel-file-manager 3.3.1 and below is vulnerable to Directory Traversal. The zip/archiving functionality allows an attacker to create archives containing files and directories outside the intended scope due to improper path validation.
RomM (ROM Manager) allows users to scan, enrich, browse and play their game collections with a clean and responsive interface. Prior to 4.4.1 and 4.4.1-beta.2, an Authenticated User can delete collections belonging to other users by directly sending a DELETE request to the collection endpoint. No ownership verification is performed before deleting collections. This vulnerability is fixed in 4.4.1 and 4.4.1-beta.2.
RomM (ROM Manager) allows users to scan, enrich, browse and play their game collections with a clean and responsive interface. Prior to 4.4.1 and 4.4.1-beta.2, users can read private collections / smart collections belonging to other users by directly accessing their IDs via API. No ownership verification or checking if the collection is public/private before returning collection data. This vulnerability is fixed in 4.4.1 and 4.4.1-beta.2.
RomM (ROM Manager) allows users to scan, enrich, browse and play their game collections with a clean and responsive interface. RomM contains multiple unrestricted file upload vulnerabilities that allow authenticated users to upload malicious SVG or HTML files. When these files are accessed the browser executes embedded JavaScript, leading to stored Cross-Site Scripting (XSS) which when combined with a CSRF misconfiguration they lead to achieve full administrative account takeover, creating a rogue admin account, escalating the attacker account role to admin, and much more. This vulnerability is fixed in 4.4.1 and 4.4.1-beta.2.
An excluded subdomain constraint in a certificate chain does not restrict the usage of wildcard SANs in the leaf certificate. For example a constraint that excludes the subdomain test.example.com does not prevent a leaf certificate from claiming the SAN *.example.com.
Buffer Overflow was found in SmallBASIC community SmallBASIC with SDL Before v12_28, and commit sha:298a1d495355959db36451e90a0ac74bcc5593fe in the function main.cpp, which can lead to potential information leakage and crash.
Improper validation of source IP addresses in OpenVPN version 2.6.0 through 2.6.15 and 2.7_alpha1 through 2.7_rc1 allows an attacker to open a session from a different IP address which did not initiate the connection resulting in a denial of service for the originating client
Allocation of Resources Without Limits or Throttling, Improper Validation of Specified Quantity in Input vulnerability in The Qt Company Qt on Windows, MacOS, Linux, iOS, Android, x86, ARM, 64 bit, 32 bit allows Excessive Allocation.
This issue affects users of the Text component in Qt Quick. Missing validation of the width and height in the <img> tag could cause an application to become unresponsive.
This issue affects Qt: from 5.0.0 through 6.5.10, from 6.6.0 through 6.8.5, from 6.9.0 through 6.10.0.
DeepChat is a smart assistant uses artificial intelligence. In 0.5.0 and earlier, there is a Stored Cross-Site Scripting (XSS) vulnerability in the Mermaid diagram renderer allows an attacker to execute arbitrary JavaScript within the application context. By leveraging the exposed Electron IPC bridge, this XSS can be escalated to Remote Code Execution (RCE) by registering and starting a malicious MCP (Model Context Protocol) server.
Envoy is a high-performance edge/middle/service proxy. In 1.33.12, 1.34.10, 1.35.6, 1.36.2, and earlier, Envoy’s mTLS certificate matcher for match_typed_subject_alt_names may incorrectly treat certificates containing an embedded null byte (\0) inside an OTHERNAME SAN value as valid matches.
Collabora Online - Built-in CODE Server (richdocumentscode) provides a built-in server with all of the document editing features of Collabora Online. In versions prior to 25.04.702, Collabora Online has a Configuration-Dependent RCE (OS Command Injection) in richdocumentscode proxy. Users of Nextcloud with Collabora Online - Built-in CODE Server app can be vulnerable to attack via proxy.php and an intermediate reverse proxy. This vulnerability is fixed in 25.04.702.
Claude Code is an agentic coding tool. Prior to 1.0.93, Due to errors in parsing shell commands related to $IFS and short CLI flags, it was possible to bypass the Claude Code read-only validation and trigger arbitrary code execution. Reliably exploiting this requires the ability to add untrusted content into a Claude Code context window. This vulnerability is fixed in 1.0.93.
An issue in HCL Technologies Limited HCLTech GRAGON before v.7.6.0 allows a remote attacker to execute arbitrary code via APIs do not enforcing limits on the number or size of requests