In the Linux kernel, the following vulnerability has been resolved:
usb: renesas_usbhs: Flush the notify_hotplug_work
When performing continuous unbind/bind operations on the USB drivers
available on the Renesas RZ/G2L SoC, a kernel crash with the message
"Unable to handle kernel NULL pointer dereference at virtual address"
may occur. This issue points to the usbhsc_notify_hotplug() function.
Flush the delayed work to avoid its execution when driver resources are
unavailable.
In the Linux kernel, the following vulnerability has been resolved:
usb: atm: cxacru: fix a flaw in existing endpoint checks
Syzbot once again identified a flaw in usb endpoint checking, see [1].
This time the issue stems from a commit authored by me (2eabb655a968
("usb: atm: cxacru: fix endpoint checking in cxacru_bind()")).
While using usb_find_common_endpoints() may usually be enough to
discard devices with wrong endpoints, in this case one needs more
than just finding and identifying the sufficient number of endpoints
of correct types - one needs to check the endpoint's address as well.
Since cxacru_bind() fills URBs with CXACRU_EP_CMD address in mind,
switch the endpoint verification approach to usb_check_XXX_endpoints()
instead to fix incomplete ep testing.
[1] Syzbot report:
usb 5-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 1378 at drivers/usb/core/urb.c:504 usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503
...
RIP: 0010:usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503
...
Call Trace:
<TASK>
cxacru_cm+0x3c8/0xe50 drivers/usb/atm/cxacru.c:649
cxacru_card_status drivers/usb/atm/cxacru.c:760 [inline]
cxacru_bind+0xcf9/0x1150 drivers/usb/atm/cxacru.c:1223
usbatm_usb_probe+0x314/0x1d30 drivers/usb/atm/usbatm.c:1058
cxacru_usb_probe+0x184/0x220 drivers/usb/atm/cxacru.c:1377
usb_probe_interface+0x641/0xbb0 drivers/usb/core/driver.c:396
really_probe+0x2b9/0xad0 drivers/base/dd.c:658
__driver_probe_device+0x1a2/0x390 drivers/base/dd.c:800
driver_probe_device+0x50/0x430 drivers/base/dd.c:830
...
In the Linux kernel, the following vulnerability has been resolved:
slimbus: messaging: Free transaction ID in delayed interrupt scenario
In case of interrupt delay for any reason, slim_do_transfer()
returns timeout error but the transaction ID (TID) is not freed.
This results into invalid memory access inside
qcom_slim_ngd_rx_msgq_cb() due to invalid TID.
Fix the issue by freeing the TID in slim_do_transfer() before
returning timeout error to avoid invalid memory access.
Call trace:
__memcpy_fromio+0x20/0x190
qcom_slim_ngd_rx_msgq_cb+0x130/0x290 [slim_qcom_ngd_ctrl]
vchan_complete+0x2a0/0x4a0
tasklet_action_common+0x274/0x700
tasklet_action+0x28/0x3c
_stext+0x188/0x620
run_ksoftirqd+0x34/0x74
smpboot_thread_fn+0x1d8/0x464
kthread+0x178/0x238
ret_from_fork+0x10/0x20
Code: aa0003e8 91000429 f100044a 3940002b (3800150b)
---[ end trace 0fe00bec2b975c99 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt.
In the Linux kernel, the following vulnerability has been resolved:
x86/amd_nb: Use rdmsr_safe() in amd_get_mmconfig_range()
Xen doesn't offer MSR_FAM10H_MMIO_CONF_BASE to all guests. This results
in the following warning:
unchecked MSR access error: RDMSR from 0xc0010058 at rIP: 0xffffffff8101d19f (xen_do_read_msr+0x7f/0xa0)
Call Trace:
xen_read_msr+0x1e/0x30
amd_get_mmconfig_range+0x2b/0x80
quirk_amd_mmconfig_area+0x28/0x100
pnp_fixup_device+0x39/0x50
__pnp_add_device+0xf/0x150
pnp_add_device+0x3d/0x100
pnpacpi_add_device_handler+0x1f9/0x280
acpi_ns_get_device_callback+0x104/0x1c0
acpi_ns_walk_namespace+0x1d0/0x260
acpi_get_devices+0x8a/0xb0
pnpacpi_init+0x50/0x80
do_one_initcall+0x46/0x2e0
kernel_init_freeable+0x1da/0x2f0
kernel_init+0x16/0x1b0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
based on quirks for a "PNP0c01" device. Treating MMCFG as disabled is the
right course of action, so no change is needed there.
This was most likely exposed by fixing the Xen MSR accessors to not be
silently-safe.
In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: avoid deadlock on fence release
Do scheduler queue fence release processing on a workqueue, rather
than in the release function itself.
Fixes deadlock issues such as the following:
[ 607.400437] ============================================
[ 607.405755] WARNING: possible recursive locking detected
[ 607.415500] --------------------------------------------
[ 607.420817] weston:zfq0/24149 is trying to acquire lock:
[ 607.426131] ffff000017d041a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: pvr_gem_object_vunmap+0x40/0xc0 [powervr]
[ 607.436728]
but task is already holding lock:
[ 607.442554] ffff000017d105a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: dma_buf_ioctl+0x250/0x554
[ 607.451727]
other info that might help us debug this:
[ 607.458245] Possible unsafe locking scenario:
[ 607.464155] CPU0
[ 607.466601] ----
[ 607.469044] lock(reservation_ww_class_mutex);
[ 607.473584] lock(reservation_ww_class_mutex);
[ 607.478114]
*** DEADLOCK ***
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: regulatory: improve invalid hints checking
Syzbot keeps reporting an issue [1] that occurs when erroneous symbols
sent from userspace get through into user_alpha2[] via
regulatory_hint_user() call. Such invalid regulatory hints should be
rejected.
While a sanity check from commit 47caf685a685 ("cfg80211: regulatory:
reject invalid hints") looks to be enough to deter these very cases,
there is a way to get around it due to 2 reasons.
1) The way isalpha() works, symbols other than latin lower and
upper letters may be used to determine a country/domain.
For instance, greek letters will also be considered upper/lower
letters and for such characters isalpha() will return true as well.
However, ISO-3166-1 alpha2 codes should only hold latin
characters.
2) While processing a user regulatory request, between
reg_process_hint_user() and regulatory_hint_user() there happens to
be a call to queue_regulatory_request() which modifies letters in
request->alpha2[] with toupper(). This works fine for latin symbols,
less so for weird letter characters from the second part of _ctype[].
Syzbot triggers a warning in is_user_regdom_saved() by first sending
over an unexpected non-latin letter that gets malformed by toupper()
into a character that ends up failing isalpha() check.
Prevent this by enhancing is_an_alpha2() to ensure that incoming
symbols are latin letters and nothing else.
[1] Syzbot report:
------------[ cut here ]------------
Unexpected user alpha2: A�
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 is_user_regdom_saved net/wireless/reg.c:440 [inline]
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_alpha2 net/wireless/reg.c:3424 [inline]
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516
Modules linked in:
CPU: 1 UID: 0 PID: 964 Comm: kworker/1:2 Not tainted 6.12.0-rc5-syzkaller-00044-gc1e939a21eb1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: events_power_efficient crda_timeout_work
RIP: 0010:is_user_regdom_saved net/wireless/reg.c:440 [inline]
RIP: 0010:restore_alpha2 net/wireless/reg.c:3424 [inline]
RIP: 0010:restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516
...
Call Trace:
<TASK>
crda_timeout_work+0x27/0x50 net/wireless/reg.c:542
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f2/0x390 kernel/kthread.c:389
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: reject cooked mode if it is set along with other flags
It is possible to set both MONITOR_FLAG_COOK_FRAMES and MONITOR_FLAG_ACTIVE
flags simultaneously on the same monitor interface from the userspace. This
causes a sub-interface to be created with no IEEE80211_SDATA_IN_DRIVER bit
set because the monitor interface is in the cooked state and it takes
precedence over all other states. When the interface is then being deleted
the kernel calls WARN_ONCE() from check_sdata_in_driver() because of missing
that bit.
Fix this by rejecting MONITOR_FLAG_COOK_FRAMES if it is set along with
other flags.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
In the Linux kernel, the following vulnerability has been resolved:
NFS: fix nfs_release_folio() to not deadlock via kcompactd writeback
Add PF_KCOMPACTD flag and current_is_kcompactd() helper to check for it so
nfs_release_folio() can skip calling nfs_wb_folio() from kcompactd.
Otherwise NFS can deadlock waiting for kcompactd enduced writeback which
recurses back to NFS (which triggers writeback to NFSD via NFS loopback
mount on the same host, NFSD blocks waiting for XFS's call to
__filemap_get_folio):
6070.550357] INFO: task kcompactd0:58 blocked for more than 4435 seconds.
{---
[58] "kcompactd0"
[<0>] folio_wait_bit+0xe8/0x200
[<0>] folio_wait_writeback+0x2b/0x80
[<0>] nfs_wb_folio+0x80/0x1b0 [nfs]
[<0>] nfs_release_folio+0x68/0x130 [nfs]
[<0>] split_huge_page_to_list_to_order+0x362/0x840
[<0>] migrate_pages_batch+0x43d/0xb90
[<0>] migrate_pages_sync+0x9a/0x240
[<0>] migrate_pages+0x93c/0x9f0
[<0>] compact_zone+0x8e2/0x1030
[<0>] compact_node+0xdb/0x120
[<0>] kcompactd+0x121/0x2e0
[<0>] kthread+0xcf/0x100
[<0>] ret_from_fork+0x31/0x40
[<0>] ret_from_fork_asm+0x1a/0x30
---}
[akpm@linux-foundation.org: fix build]
In the Linux kernel, the following vulnerability has been resolved:
mm: memory-failure: update ttu flag inside unmap_poisoned_folio
Patch series "mm: memory_failure: unmap poisoned folio during migrate
properly", v3.
Fix two bugs during folio migration if the folio is poisoned.
This patch (of 3):
Commit 6da6b1d4a7df ("mm/hwpoison: convert TTU_IGNORE_HWPOISON to
TTU_HWPOISON") introduce TTU_HWPOISON to replace TTU_IGNORE_HWPOISON in
order to stop send SIGBUS signal when accessing an error page after a
memory error on a clean folio. However during page migration, anon folio
must be set with TTU_HWPOISON during unmap_*(). For pagecache we need
some policy just like the one in hwpoison_user_mappings to set this flag.
So move this policy from hwpoison_user_mappings to unmap_poisoned_folio to
handle this warning properly.
Warning will be produced during unamp poison folio with the following log:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 365 at mm/rmap.c:1847 try_to_unmap_one+0x8fc/0xd3c
Modules linked in:
CPU: 1 UID: 0 PID: 365 Comm: bash Tainted: G W 6.13.0-rc1-00018-gacdb4bbda7ab #42
Tainted: [W]=WARN
Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : try_to_unmap_one+0x8fc/0xd3c
lr : try_to_unmap_one+0x3dc/0xd3c
Call trace:
try_to_unmap_one+0x8fc/0xd3c (P)
try_to_unmap_one+0x3dc/0xd3c (L)
rmap_walk_anon+0xdc/0x1f8
rmap_walk+0x3c/0x58
try_to_unmap+0x88/0x90
unmap_poisoned_folio+0x30/0xa8
do_migrate_range+0x4a0/0x568
offline_pages+0x5a4/0x670
memory_block_action+0x17c/0x374
memory_subsys_offline+0x3c/0x78
device_offline+0xa4/0xd0
state_store+0x8c/0xf0
dev_attr_store+0x18/0x2c
sysfs_kf_write+0x44/0x54
kernfs_fop_write_iter+0x118/0x1a8
vfs_write+0x3a8/0x4bc
ksys_write+0x6c/0xf8
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x44/0x100
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x30/0xd0
el0t_64_sync_handler+0xc8/0xcc
el0t_64_sync+0x198/0x19c
---[ end trace 0000000000000000 ]---
[mawupeng1@huawei.com: unmap_poisoned_folio(): remove shadowed local `mapping', per Miaohe]
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: clean up ROC on failure
If the firmware fails to start the session protection, then we
do call iwl_mvm_roc_finished() here, but that won't do anything
at all because IWL_MVM_STATUS_ROC_P2P_RUNNING was never set.
Set IWL_MVM_STATUS_ROC_P2P_RUNNING in the failure/stop path.
If it started successfully before, it's already set, so that
doesn't matter, and if it didn't start it needs to be set to
clean up.
Not doing so will lead to a WARN_ON() later on a fresh remain-
on-channel, since the link is already active when activated as
it was never deactivated.
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: limit printed string from FW file
There's no guarantee here that the file is always with a
NUL-termination, so reading the string may read beyond the
end of the TLV. If that's the last TLV in the file, it can
perhaps even read beyond the end of the file buffer.
Fix that by limiting the print format to the size of the
buffer we have.
In the Linux kernel, the following vulnerability has been resolved:
caif_virtio: fix wrong pointer check in cfv_probe()
del_vqs() frees virtqueues, therefore cfv->vq_tx pointer should be checked
for NULL before calling it, not cfv->vdev. Also the current implementation
is redundant because the pointer cfv->vdev is dereferenced before it is
checked for NULL.
Fix this by checking cfv->vq_tx for NULL instead of cfv->vdev before
calling del_vqs().
In the Linux kernel, the following vulnerability has been resolved:
mctp i3c: handle NULL header address
daddr can be NULL if there is no neighbour table entry present,
in that case the tx packet should be dropped.
saddr will usually be set by MCTP core, but check for NULL in case a
packet is transmitted by a different protocol.
In the Linux kernel, the following vulnerability has been resolved:
acpi: typec: ucsi: Introduce a ->poll_cci method
For the ACPI backend of UCSI the UCSI "registers" are just a memory copy
of the register values in an opregion. The ACPI implementation in the
BIOS ensures that the opregion contents are synced to the embedded
controller and it ensures that the registers (in particular CCI) are
synced back to the opregion on notifications. While there is an ACPI call
that syncs the actual registers to the opregion there is rarely a need to
do this and on some ACPI implementations it actually breaks in various
interesting ways.
The only reason to force a sync from the embedded controller is to poll
CCI while notifications are disabled. Only the ucsi core knows if this
is the case and guessing based on the current command is suboptimal, i.e.
leading to the following spurious assertion splat:
WARNING: CPU: 3 PID: 76 at drivers/usb/typec/ucsi/ucsi.c:1388 ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi]
CPU: 3 UID: 0 PID: 76 Comm: kworker/3:0 Not tainted 6.12.11-200.fc41.x86_64 #1
Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN45WW 03/17/2023
Workqueue: events_long ucsi_init_work [typec_ucsi]
RIP: 0010:ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi]
Call Trace:
<TASK>
ucsi_init_work+0x3c/0xac0 [typec_ucsi]
process_one_work+0x179/0x330
worker_thread+0x252/0x390
kthread+0xd2/0x100
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
Thus introduce a ->poll_cci() method that works like ->read_cci() with an
additional forced sync and document that this should be used when polling
with notifications disabled. For all other backends that presumably don't
have this issue use the same implementation for both methods.
In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Add sanity checks on rdev validity
There is a possibility that ulp_irq_stop and ulp_irq_start
callbacks will be called when the device is in detached state.
This can cause a crash due to NULL pointer dereference as
the rdev is already freed.
In the Linux kernel, the following vulnerability has been resolved:
NFSv4: Fix a deadlock when recovering state on a sillyrenamed file
If the file is sillyrenamed, and slated for delete on close, it is
possible for a server reboot to triggeer an open reclaim, with can again
race with the application call to close(). When that happens, the call
to put_nfs_open_context() can trigger a synchronous delegreturn call
which deadlocks because it is not marked as privileged.
Instead, ensure that the call to nfs4_inode_return_delegation_on_close()
catches the delegreturn, and schedules it asynchronously.
In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix bad hist from corrupting named_triggers list
The following commands causes a crash:
~# cd /sys/kernel/tracing/events/rcu/rcu_callback
~# echo 'hist:name=bad:keys=common_pid:onmax(bogus).save(common_pid)' > trigger
bash: echo: write error: Invalid argument
~# echo 'hist:name=bad:keys=common_pid' > trigger
Because the following occurs:
event_trigger_write() {
trigger_process_regex() {
event_hist_trigger_parse() {
data = event_trigger_alloc(..);
event_trigger_register(.., data) {
cmd_ops->reg(.., data, ..) [hist_register_trigger()] {
data->ops->init() [event_hist_trigger_init()] {
save_named_trigger(name, data) {
list_add(&data->named_list, &named_triggers);
}
}
}
}
ret = create_actions(); (return -EINVAL)
if (ret)
goto out_unreg;
[..]
ret = hist_trigger_enable(data, ...) {
list_add_tail_rcu(&data->list, &file->triggers); <<<---- SKIPPED!!! (this is important!)
[..]
out_unreg:
event_hist_unregister(.., data) {
cmd_ops->unreg(.., data, ..) [hist_unregister_trigger()] {
list_for_each_entry(iter, &file->triggers, list) {
if (!hist_trigger_match(data, iter, named_data, false)) <- never matches
continue;
[..]
test = iter;
}
if (test && test->ops->free) <<<-- test is NULL
test->ops->free(test) [event_hist_trigger_free()] {
[..]
if (data->name)
del_named_trigger(data) {
list_del(&data->named_list); <<<<-- NEVER gets removed!
}
}
}
}
[..]
kfree(data); <<<-- frees item but it is still on list
The next time a hist with name is registered, it causes an u-a-f bug and
the kernel can crash.
Move the code around such that if event_trigger_register() succeeds, the
next thing called is hist_trigger_enable() which adds it to the list.
A bunch of actions is called if get_named_trigger_data() returns false.
But that doesn't need to be called after event_trigger_register(), so it
can be moved up, allowing event_trigger_register() to be called just
before hist_trigger_enable() keeping them together and allowing the
file->triggers to be properly populated.
In the Linux kernel, the following vulnerability has been resolved:
ftrace: Avoid potential division by zero in function_stat_show()
Check whether denominator expression x * (x - 1) * 1000 mod {2^32, 2^64}
produce zero and skip stddev computation in that case.
For now don't care about rec->counter * rec->counter overflow because
rec->time * rec->time overflow will likely happen earlier.
In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix pick_task_scx() picking non-queued tasks when it's called without balance()
a6250aa251ea ("sched_ext: Handle cases where pick_task_scx() is called
without preceding balance_scx()") added a workaround to handle the cases
where pick_task_scx() is called without prececing balance_scx() which is due
to a fair class bug where pick_taks_fair() may return NULL after a true
return from balance_fair().
The workaround detects when pick_task_scx() is called without preceding
balance_scx() and emulates SCX_RQ_BAL_KEEP and triggers kicking to avoid
stalling. Unfortunately, the workaround code was testing whether @prev was
on SCX to decide whether to keep the task running. This is incorrect as the
task may be on SCX but no longer runnable.
This could lead to a non-runnable task to be returned from pick_task_scx()
which cause interesting confusions and failures. e.g. A common failure mode
is the task ending up with (!on_rq && on_cpu) state which can cause
potential wakers to busy loop, which can easily lead to deadlocks.
Fix it by testing whether @prev has SCX_TASK_QUEUED set. This makes
@prev_on_scx only used in one place. Open code the usage and improve the
comment while at it.
In the Linux kernel, the following vulnerability has been resolved:
fuse: revert back to __readahead_folio() for readahead
In commit 3eab9d7bc2f4 ("fuse: convert readahead to use folios"), the
logic was converted to using the new folio readahead code, which drops
the reference on the folio once it is locked, using an inferred
reference on the folio. Previously we held a reference on the folio for
the entire duration of the readpages call.
This is fine, however for the case for splice pipe responses where we
will remove the old folio and splice in the new folio (see
fuse_try_move_page()), we assume that there is a reference held on the
folio for ap->folios, which is no longer the case.
To fix this, revert back to __readahead_folio() which allows us to hold
the reference on the folio for the duration of readpages until either we
drop the reference ourselves in fuse_readpages_end() or the reference is
dropped after it's replaced in the page cache in the splice case.
This will fix the UAF bug that was reported.
In the Linux kernel, the following vulnerability has been resolved:
perf/core: Order the PMU list to fix warning about unordered pmu_ctx_list
Syskaller triggers a warning due to prev_epc->pmu != next_epc->pmu in
perf_event_swap_task_ctx_data(). vmcore shows that two lists have the same
perf_event_pmu_context, but not in the same order.
The problem is that the order of pmu_ctx_list for the parent is impacted by
the time when an event/PMU is added. While the order for a child is
impacted by the event order in the pinned_groups and flexible_groups. So
the order of pmu_ctx_list in the parent and child may be different.
To fix this problem, insert the perf_event_pmu_context to its proper place
after iteration of the pmu_ctx_list.
The follow testcase can trigger above warning:
# perf record -e cycles --call-graph lbr -- taskset -c 3 ./a.out &
# perf stat -e cpu-clock,cs -p xxx // xxx is the pid of a.out
test.c
void main() {
int count = 0;
pid_t pid;
printf("%d running\n", getpid());
sleep(30);
printf("running\n");
pid = fork();
if (pid == -1) {
printf("fork error\n");
return;
}
if (pid == 0) {
while (1) {
count++;
}
} else {
while (1) {
count++;
}
}
}
The testcase first opens an LBR event, so it will allocate task_ctx_data,
and then open tracepoint and software events, so the parent context will
have 3 different perf_event_pmu_contexts. On inheritance, child ctx will
insert the perf_event_pmu_context in another order and the warning will
trigger.
[ mingo: Tidied up the changelog. ]
In the Linux kernel, the following vulnerability has been resolved:
net: enetc: VFs do not support HWTSTAMP_TX_ONESTEP_SYNC
Actually ENETC VFs do not support HWTSTAMP_TX_ONESTEP_SYNC because only
ENETC PF can access PMa_SINGLE_STEP registers. And there will be a crash
if VFs are used to test one-step timestamp, the crash log as follows.
[ 129.110909] Unable to handle kernel paging request at virtual address 00000000000080c0
[ 129.287769] Call trace:
[ 129.290219] enetc_port_mac_wr+0x30/0xec (P)
[ 129.294504] enetc_start_xmit+0xda4/0xe74
[ 129.298525] enetc_xmit+0x70/0xec
[ 129.301848] dev_hard_start_xmit+0x98/0x118
Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in reputeinfosystems BookingPress bookingpress-appointment-booking allows SQL Injection.This issue affects BookingPress: from n/a through <= 1.1.28.
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Arrow Plugins Arrow Custom Feed for Twitter arrow-twitter-feed allows Stored XSS.This issue affects Arrow Custom Feed for Twitter: from n/a through <= 1.5.3.
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in paulrosen ABC Notation abc-notation allows Stored XSS.This issue affects ABC Notation: from n/a through <= 6.1.3.
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Infoway LLC Ebook Downloader ebook-downloader allows Stored XSS.This issue affects Ebook Downloader: from n/a through <= 1.0.
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Themeum WP Crowdfunding wp-crowdfunding allows Stored XSS.This issue affects WP Crowdfunding: from n/a through <= 2.1.15.
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Mashi Simple Map No Api simple-map-no-api allows Stored XSS.This issue affects Simple Map No Api: from n/a through <= 1.9.
Missing Authorization vulnerability in zookatron MyBookProgress by Stormhill Media mybookprogress allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects MyBookProgress by Stormhill Media: from n/a through <= 1.0.8.
Missing Authorization vulnerability in Repuso Social proof testimonials and reviews by Repuso social-testimonials-and-reviews-widget allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Social proof testimonials and reviews by Repuso: from n/a through <= 5.21.
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Daniel Floeter Hyperlink Group Block hyperlink-group-block allows DOM-Based XSS.This issue affects Hyperlink Group Block: from n/a through <= 2.0.1.
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in WPWebinarSystem WebinarPress wp-webinarsystem allows Stored XSS.This issue affects WebinarPress: from n/a through <= 1.33.28.
Missing Authorization vulnerability in Stylemix Pearl pearl-header-builder allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Pearl: from n/a through <= 1.3.9.
Cross-Site Request Forgery (CSRF) vulnerability in Stylemix Pearl pearl-header-builder allows Cross Site Request Forgery.This issue affects Pearl: from n/a through <= 1.3.9.
Missing Authorization vulnerability in Dmitry V. (CEO of "UKR Solution") Barcode Generator for WooCommerce embedding-barcodes-into-product-pages-and-orders allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Barcode Generator for WooCommerce: from n/a through <= 2.0.4.
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Pluginic FancyPost post-block allows DOM-Based XSS.This issue affects FancyPost: from n/a through <= 6.0.6.
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Ajay WebberZone Snippetz add-to-all allows Stored XSS.This issue affects WebberZone Snippetz: from n/a through <= 2.1.1.
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in sheetdb SheetDB sheetdb allows Stored XSS.This issue affects SheetDB: from n/a through <= 1.3.4.
Missing Authorization vulnerability in Galaxy Weblinks WP Clone any post type wp-clone-any-post-type allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WP Clone any post type: from n/a through <= 3.6.
URL Redirection to Untrusted Site ('Open Redirect') vulnerability in Galaxy Weblinks WP Clone any post type wp-clone-any-post-type allows Phishing.This issue affects WP Clone any post type: from n/a through <= 3.6.